• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.6
• /
• pp.381-381
• /
• 2000

In this paper, we propose a real-time bandwidth allocation scheme of multiplexed VBR MPEG video sequences over ATM network. In order to real time processing, multiplexed source is estimated by linear-prediction per measurement period. If the result CLR value were not sufficient, we proposed a overallocation method and a reallocation one to guarantee QoS. We used two kinds of sources, one is random multiplexed source made of foot different video sources, the other is the one considered the arrange of I frame in the sequence. With those sources, we analyzed the linear prediction, compared overallocation with reallocation method. As a result, in both schemes, the objected CLR value is achieved, the sufficient value COR under 10% when mp is over 1.8 sec, the utilization is over 0.9. Especially, the COR value of the reallocation scheme is better at the same condition.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.13-22
• /
• 2004

Because video sequence consists of dynamic objects in nature, the object motion in video is an effective feature in describing the contents of video sequence and motion feature plays an important role in video retrieval. In this paper, we propose a method that converts motion vectors (MVs) to a uniform set on MPEG coded domain, independent of the frame type and the direction of prediction, and utilizes these normalized MVs (N-MVs) as motion descriptor to understand video contents. We describe a frame-type independent representation of the various types of frames presented in an MPEG video in which all frames can be considered equivalently, without full-decoding. In the experiments, we show that the proposed method is better than the conventional one in terms of performance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.111-121
• /
• 1993

Changes in bed forms and subsequent changes in channel roughness by changes in water discharge are discussed with the field data collected from some alluvial rivers in Korea. This study is limited to the following condition of river flow: (1) Medium size alluvial rivers with their widths of 100 m more or less, (2) Straight and prismatic river reach with no additional causes for energy loss but bed friction, (3) Lower-flow regime with Froude number less than 0.5. Major conclusions obtained from this study can be summarized as follows: (1) For the channels considered in this study, the bed roughness expressed by Manning's n increases from 0.02 for the plane beds with no sediment motion to 0.05 for the dune beds, (2) The roughness coefficient for alluvial channels should not be estimated from Strickler-type equations developed for the fixed beds, (3) The method for determining the channel roughness suggested in the present guideline for river works, River Structure Standard, appears to be lack of generality. More research based on the field data collected in Korea is needed in order to improve the existing methods.

• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.518-523
• /
• 1999

In thi, study, we made experiments to fonn a mesa shape by meltback method with various concentration of solutions and found that unsaturated (20%) InGaAsP (1.55 !-tm) solution at a growth temperature was the most suitable for the formation of a mesa ,hape on the wafer which has an InGaAsP active layer and an InP cap layer on an n-InP substrate. It was difficult to form a proper mesa shape for the fabrication of PBH-LDs only by the meltback method; therefore, we fabricated PBH-LDs by forming the mesa shape with the meltback method after wet etching and by growing a current-blocking layer successively. As the electrical and optical charaleri,tiecs of MQW-PBH-LDs fabricated by above methods, when the cavity length was $300{\mu}m$, the threshold current was about 10 mA, internal quantum efficiency 82%, internal loss $9.2cm^{-1}$, and characteristic temperature was 65 K at $25~45^{\circ}C$ and 42 K at $45~65^{\circ}C$. /TEX>.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.83-83
• /
• 1999

본 연구에서는 Auger Elecrtron Spectroscopy (AES) 장비를 이용하여 Silicone Wafer 표면에 BF 이온을 주입시킨 후 Dopping 농도 및 Implantation 에너지에 따른 Si KLL Peak의 변화를 관찰하였다. 또한 PVD Ti 계열 화학물의 시료에 대하여 Peak의 Shape 변화를 관찰하였다. 1)Dopping 농도 및 Implantation 에너지에 따른 Si KLL Peak의 변화 관찰 일반적으로 Silicone 기판에 Arsenic(3가)을 Dopping 하였을 경우, Si KLL Peak의 Kinetic Energy 값은 순수 Si Peak보다 더 작은 값으로 Shift 하며, Boron (5가)을 Dopping하였을 경우에는 더 큰 값으로 Shift 한다. 이론적으로 N-type Si의 에너지 차이는 약 1.0eV로 보고되어 있으며, AES를 이용하여 실험적으로 측정된 값은 약 0.6eV정도로 알려져 있다. 이러한 차이는 Dopping 농도에 따라 Valance Band의 에너지 값이 변화하기 때문이라고 알려져 있다. 본 연구에서는 BF2를 Si에 이온 주입하여 입사 에너지 및 dose 량에 따른 Si KLL Peak의 변화를 관찰하였다. 그림1과 같이 Si KLL Peak는 Implantation Energy가 작을수록 Kinetic Energy가 높은 곳으로 Shift 한다. 이는 LOw Energy로 이온 주입하면, Projected Range (Rp)가 High Energy로 이온 주입할 때보다 작기 때문이며, 이 결과를 Secondary Ion Mass Spectroscopy (SIMS) 및 TRIM simulation을 이용하여 확인하였다. 또한 표면에서의 전자 Density의 변화와 Implantation energy와의 관계를 시료의 표면에서 반사되어 나오는 전자의 에너지 손실(Reflected Electron Energy Loss Spectroscopy:REELS)을 통하여 고찰하였다. 2) PVD Ti 계열화합물의 시료에 대한 peak의 shape 가 변화하며, TiL3M23V (Ti2) 및 TiL3M23M23 (Til) Peak의 Intensity Ratio가 변화한다. 따라서 본 연구에서는 그림 2와 같이 Ti 결합 화합물에서의 Ti Auger Peak의 특성 에너지 값과 Peak Shape를 관찰하여, AES를 이용하여 Ti 계열의 화합물에 대한 Chemical state 분석의 가능성을 평가하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.73-77
• /
• 2012

In this article, we designed a wide bandpass filter in order to apply microwave reflectometry for KSTAR. The proposed wide bandpass filter consists of a metamaterial structure which is to get a wide band, a lower insertion loss, and a high skirt. This is applied to VCO's output to enhance the linearity. A pass band is 18-28 GHz and the out of pass band is stopped over 20 dB. To confirm of the metamaterial, we suggest a dispersion diagram. The proposed filter in lower band and upper band of pass band is respectively a left handed and right handed characteristics. A group delay is below 0.5 ns.

• Journal of Aquaculture
• /
• v.15 no.2
• /
• pp.87-93
• /
• 2002

To improve the efficiency of biological filters used for treating recycled wastewater of aquaculture, the conventional and advanced DynaSand Filters were tested. Applying the fluid mechanics and physical chemistry theories to wastewater treatment plant, the advanced filter focuses on detection of wastewater characteristics and automatic operation of DynaSand Filter to improve backwashing, oxygen transport, turbidity removal and continuous head loss. The Filter removes COD, ammonia, and suspended solids (SS), the major pollutants in aquaculture wastewater. The total volume of the DynaSand Filter is 70 L, while the working volume is 35 L per cycle. The removal efficiency of the advanced DynaSand Filter is 71 % for SS (as against 55 % for the conventional filter), 84 % for ammonia, 85 % for T-P, and 88 % for SRP.

• Journal of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.431-435
• /
• 1989

The refractive index, refractive-index distribution, birefringence, and the attenuation of the plastic fiber prepared from the transparent PMMA prerod were measured in accordance with continuous heat drawing temperature($T_d$). The refractive indices were decreased with $T_d$ elevation but the refractive-index distribution from the center of fiber to periphery was higher at lower $T_d$. The steep decrease of gradient index was only at the periphery of higher $T_d$. Birefringence was observed only below $220^{\circ}C$ and ranged $5{\times}10^{-4}$ to $6{\times}10^{-4}$. No birefringence was observed above $220^{\circ}C$. An elevation of $T_d$ brought about a monotonous decrease in the attenuation of the fiber.

• KSBB Journal
• /
• v.11 no.1
• /
• pp.100-106
• /
• 1996

The extraction of taxol and baccatin III from the ground needles of Taxus cuspidata were carried out by using supercritical carbon dioxide with and without cosolvents such as ethylacetate and methanol at 300 bar and 313K. Taxol is a promising anticancer agent and baccatin III is a precursor of semisysthesis of taxol. The taxol and baccatin III contents in the extracts were determined by a HPLC. The highest yields of taxol and baccatin III could be obtained by the supercritical extraction with 3wt% methanol and ethylacetate, respectively, as cosolvents. It was also found that the selectivity of taxol and baccatin III were 0.117 and 1.245wt%, respectively, with 0.7wt% ethylacetate, which demonstrated that the selectivity of taxol and baccatin III were increased about 1.8 and 19 times than those of conventional organic solvent extraction.

• Journal of KIISE:Information Networking
• /
• v.41 no.4
• /
• pp.177-185
• /
• 2014

It has been occurred many times that wireless sensor networks (WSNs) had congested areas because all the sensing data collected by multiple sensor nodes are delivered to one sink node. Typically, in order to control congested areas, it used to reduce the traffic by increasing the sensing period or discarding packets. However, those schemes have a disadvantage that it loses the reliability when delivering sensing data. Moreover, there are no schemes considering case of having poor quality of links between nodes in practical terms. In this paper, we suggest a scheme not to reduce the traffic but to distribute the traffic by changing routing paths depends on the traffic and the quality of links. Also, it can be seen that the reliability of delivering of the sensing data is improved with the experiments improving collection rates and shortening end-to-end delay.