• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.5_6
• /
• pp.324-329
• /
• 2003

The public-key cryptosystems such as Diffie-Hellman Key Distribution and Elliptical Curve Cryptosystems are built on the basis of the operations defined in GF(2$^{m}$ ):addition, subtraction, multiplication and multiplicative inversion. It is important that these operations should be computed at high speed in order to implement these cryptosystems efficiently. Among those operations, as being the most time-consuming, multiplicative inversion has become the object of lots of investigation Formant's theorem says $\beta$$^{-1}$ =$\beta$$^{2}$sup m/-2/, where $\beta$$^{-1}$ is the multiplicative inverse of $\beta$$\in$GF(2$^{m}$ ). Therefore, to compute the multiplicative inverse of arbitrary elements of GF(2$^{m}$ ), it is most important to reduce the number of times of multiplication by decomposing 2$^{m}$ -2 efficiently. Among many algorithms relevant to the subject, the algorithm proposed by Itoh and Tsujii[2] has reduced the required number of times of multiplication to O(log m) by using normal basis. Furthermore, a few papers have presented algorithms improving the Itoh and Tsujii's. However they have some demerits such as complicated decomposition processes[3,5]. In this paper, in the case of 2$^{m}$ -2, which is mainly used in practical applications, an efficient algorithm is proposed for computing the multiplicative inverse at high speed by using both the factorization formula x$^3$-y$^3$=(x-y)(x$^2$＋xy＋y$^2$) and normal basis. The number of times of multiplication of the algorithm is smaller than that of the algorithm proposed by Itoh and Tsujii. Also the algorithm decomposes 2$^{m}$ -2 more simply than other proposed algorithms.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.121-129
• /
• 2012

The edge area with burn severity is known as significant factor that has great effects on the ecosystem recovery. However, there is little study on the edge area and its effects in the South Korea. Thus, this study aimed to analyze immediate responses of vegetation following forest fires due to combined effect of burn severity and edge-interior effect. Burn Severity (BS), or ${\Delta}NBR$ values were computed using satellite images of pre and post-forest fire in Samcheock areas. The burn forest was classified 231 $1-km^2$ girds and these grids were further reclassified into 4 groups by BS type (low BS and high BS areas) and forest areas (edge areas and interior areas). These four groups of grids including low BS-interior (group A), low BS-edge (group B), high BS-interior (group C) and high BS-edge (group D). Post-fire vegetation responses measured with (${\Delta}NDVI$) among four groups were then compared and tested by T-test. The results indicated that group C (${\Delta}NDVI$=0.047) and D (${\Delta}NDVI$ = 0.059) showed considerably greater vegetation regeneration than those of low BS areas including group A (${\Delta}NDVI$ = -0.039) and group B (${\Delta}NDVI$ = -0.036). It was also observed that edges areas showed greater vegetation regeneration than interior areas when BS is the same. Group B (${\Delta}NDVI$ = -0.036) showed greater (${\Delta}NDVI$) values than group A (${\Delta}NDVI$ = -0.039) in low BS condition. Similar relationship is observed between group C and group D in high BS condition. Thus adequate restoration practices for burned areas might need to pay close attention to interior areas with low BS to minimize the secondary damages and to rehabilitate the burned forests.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.163-174
• /
• 2012

CBI(Composite Burn Index) developed by USDA Forest Service is a index to measure burn severity based on remote sensing. In Korea, the CBI has been used to investigate the burn severity of fire sites for the last few years. However, it has been an argument on that CBI is not adequate to capture unique characteristics of Korean forests, and there has been a demand to develop KCBI(Korean Composite Burn Index). In this regard, this study aimed to develop KCBI by adjusting the CBI and to validate its applicability by using remote sensing technique. Uljin and Youngduk, two large fire sites burned in 2011, were selected as study areas, and forty-four sampling plots were assigned in each study area for field survey. Burn severity(BS) of the study areas were estimated by analyzing NDVI from SPOT images taken one month later of the fires. Applicability of KCBI was validated with correlation analysis between KCBI index values and NDVI values and their confusion matrix. The result showed that KCBI index values and NDVI values were closely correlated in both Uljin (r = -0.54 and p<0.01) and Youngduk (r = -0.61 and p<0.01). Thus this result supported that proposed KCBI is adequate index to measure burn severity of fire sites in Korea. There was a number of limitations, such as the low correlation coefficients between BS and KCBI and skewed distribution of KCBI sampling plots toward High and Extreme classes. Despite of these limitations, the proposed KCBI showed high potentials for estimating burn severity of fire sites in Korea, and could be improved by considering the limitations in further studies.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.36-45
• /
• 2012

Education on the environment and plants offered by arboretum for today's people not only contribute to foster a better natural environment in urban region but also provide visitors with decent refreshment environment and beyond. In the study, the author undertook the observation on usage behavior and satisfaction model of arboretum visitors expect and investigated the facilities and programs to be offered by arboretum in order to propose the opinion regarding the service. For observation size of variables in a multiple regression analysis of variables is influencing satisfaction rankings walks the line of flow, the educational effect on the environment, cleanliness of the facility, visits pay, natural beauty, diversity of trees, accessibility and friendliness of staff, expansion of facilities in the arboretum and appeared as a complement. In case of visitor attribute, the residents living near the facility showed the highest visit frequency of more than 5 times, especially as part of taking a walk. This proves that the visit to arboretum is considered as part of everyday life, and thus a new program and walk path as well as movement route are needed to be developed for the visitors. In the question relating to the facilities and operation programs in Daegu Arboretum, particularly the requests by visitors, they responded that the establishment of cultural event, beautiful natural scenery, refreshment and convenience facilities is the most critical issue. In addition, the management on withered trees and bare lands is an urgent issue as well. In this sense, the Operation and Management Strategies based upon the visitor behaviors and model of satisfaction are needed to deal with the adoption of diverse events and festivals joined by local residents, ombudsman program, environmental program development for students and teachers within the region, negligent bare lands and withered tree replacement, and cafeteria facility improvement and supplement as well as the bench marking of other facilities than arboretums located in other regions. These items are thought to be sufficiently dealt with by Daegu Arboretum having no more external resources. It is recognized that the visitor satisfaction begins from a minor thing, and a small difference determines a great satisfaction, and thus the software approach rather than hardware one is in need.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.7-19
• /
• 2012

After having announced legislation for threatened or endangered species on the List of Endangered and Threatened Wildlife and Plants in 2005, the Korea Ministry of Environment proposed (in June 2011) amending the list, thereby delisting or reclassifying endangered species using new quantitative criteria for two levels (I and II), as well as status reviews. The new legislation included 40 species remained in their original endangered status, but 19 species were delisted, 5 species were proposed as candidates for delisting, 29 species were given a new endangered listing, and 3 species were proposed for an endangered listing in Korea. We assessed the threatened status of 98 plants using the IUCN Red List Criteria (version 3.1) at the global level, and compared the Ministry's revised criteria with the IUCN Red List Criteria and ESA criteria used in the USA. Most species proposed by the Ministry do not qualify as threatened and one of the major difficulties found in applying IUCN Red List Criteria at the global scale was a lack of knowledge on the status of species at broader geographic scales and the perceived difficulty this causes. Under the current classification process, many endangered species, such as Abeliophyllum distichum, Leontice microrhyncha, Echinosophora koreensis, Leontopodium coreanum, Iris odaesanensis, and Corylopsis coreana at global level were excluded here. Knowledge gaps and uncertainties mean that the number of taxa at high risk of extinction may be substantially greater than is currently understood. Due to a lack of information on its taxonomic status, currently there is controversy over the Red List status of Physocarpus insularis. Also, Caragana koreana, which was an invalidly published name, should be excluded here. Although the Korea Ministry of Environment insisted this procedure was conducted by applying the modified IUCN threat categories and definitions, this evaluation has been carried out based only on subjective views and misapplication of the IUCN Red List Criteria. The current listings by the Korea Ministry of Environment should be challenged. We suggest that broad species concepts on endemic species are applied and also criteria that adequately address the proper quantitative knowledge should be used. It is suggested that the highest priorities for the Red List should be given to endemic species at least in the Korean peninsula first at global scale.

• Korean Journal of Remote Sensing
• /
• v.30 no.5
• /
• pp.597-605
• /
• 2014

The continuous observations for atmospheric aerosols were conducted during 3 years (2009 to 2011) by using Gwangju Institute of Science and Technology (GIST) multi-wavelength Raman lidar at Gwangju, Korea ($35.10^{\circ}N$, $126.53^{\circ}E$). The aerosol depolarization ratios calculated from lidar data were used to identify the Asian dust layer. The optical properties of Asian dust layer were different according to its vertical distribution. In order to investigate the difference between the optical properties of each individual dust layers, the transport pathway and the transport altitude of Asian dust were analyzed by Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) model. We consider that the variation of optical properties were influenced not only their transport pathway but also their transport height when it passed over anthropogenic pollution source regions in China. The lower particle depolarization ratio values of $0.12{\pm}0.01$, higher lidar ratio of $67{\pm}9sr$ and $68{\pm}9sr$ at 355 nm and 532 nm, respectively, and higher ${\AA}ngstr\ddot{o}m$ exponent of $1.05{\pm}0.57$ which are considered as the optical properties of pollution were found. In contrast with this, the higher particle depolarization ratio values of $0.21{\pm}0.09$, lower lidar ratio of $48{\pm}5sr$ and $46{\pm}4sr$ at 355 nm and 532 nm, respectively, and lower ${\AA}ngstr\ddot{o}m$ exponent of $0.57{\pm}0.24$ which are considered as the optical properties of dust were found. We found that the degree of mixing of anthropogenic pollutant aerosols in mixed Asian dust govern the variation of optical properties of Asian dust and it depends on their altitude when it passed over the polluted regions over China.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.5
• /
• pp.20-34
• /
• 2006

This study was undertaken to assess the anthropogenic impact on trace metal concentrations (Zn, Cu, Pb, Cr, Ni, and Cd) of roadside sediments (N = 70) from No.7 national road within the watershed of Hoidong Reservoir in Pusan City and to estimate the potential mobility of selected metals using sequential extraction. We generally found high concentrations of metals, especially Zn, Cu and Pb, affected by anthropogenic inputs. Compared to the trace metal concentrations of uncontaminated stream sediments, arithmetic mean concentrations of roadside sediments were about 7 times higher for Cu, 4 times higher for Zn, 3 times higher for Pb and Cr and, 2 times higher for Ni and As. Speciation data on the basis of sequential extraction indicate that most of the trace metals considered do not occur in significant quantities in the exchangeable fraction, except for Cd and Ni whose exchangeable fractions are appreciable (average 29.3 and 25.8%, respectively). Other metals such as Zn (51.4%) and Pb (45.2%) are preferentially bound to the reducible fraction, and therefore they can be potentially released by a pH decrease and/or redox change. Copper is mainly found in the organic fraction, while Cd is highest in the exchangeable fraction, and Cr and Ni in the residual fraction. Considering the proportion of metals bound to the exchangeable and carbonate fractions, the comparative mobility of metals probably decreases in the order of Cd>Ni>Pb>Zn>Cr>Cu. Although the total concentration data showed that Zn was typically present in potentially harmful concentration levels, the data on metal partitioning indicated that Cd, Ni and Pb pose the highest potential hazard for runoff water. As potential changes of redox state and pH may remobilize the metals bound to carbonates, amorphous oxides, and/or organic matter, and may release and flush them through drain networks into the watershed of Hoidong Reservoir, careful monitoring of environmental conditions appears to be very important.

• Korean Journal of Poultry Science
• /
• v.32 no.4
• /
• pp.245-254
• /
• 2005

This experiment was conducted to investigate the effect of the supplemental alkali feldspar-ilite(feldspar) on growth performance and meat quality in broiler ducks for 43 days. One hundred eighty broiler ducks were divided into 5 groups of 12ducks. Dietary levels of feldspar 0, 0+antibiotics, 0.5, 1.0 and $1.5\%$ were added to experimental diets of each of the groups. Daily weight gain was slightly increased in 1.0 and $1.5\%$ feldspar treatments. Feed intake was slightly increased at all feldspar treatments. Glucose concentration of serum profile was decreased whereas BUN concentration was significantly increased (p<0.05) at $0.5\%$ feldspar. Cholesterol concentration was decreased at all feldspar treatments, this difference was especially observed in supplemental levels of $0.5\%$ feldspar(p<0.05). Carcass weight was increased at all feldspar treatments. Moisture and crude fat contents of proximate chemical composition in duck meat were decreased at all feldspar treatment, this difference especially was observed in supplemental levels of $1.5\%$ feldspar(p<0.05) on crude fat content. Lightness and yellowness was increased at all feldspar treatment. Cholesterol contents and TBA in meat were decreased, but this parameters were not difference by feldspar treatment. The composition of saturated fatty acids(SFA) was decreased, whereas unsaturated fatty acids(USFA) was slightly increased by feldspar treatment. The Pb content of heavy metal concentrations was increased with compared control, but not difference. The appearance of sensory evaluation was improved by supplemental feldspar, especially in supplemental feldspar, 1.0 and $1.5\%$(p<0.05). The results of this study indicate that the supplemental alkali feldspar may improve the production and meat quality of broiler ducks.

• The Journal of Korean Physical Therapy
• /
• v.3 no.1
• /
• pp.9-37
• /
• 1991

The purpose of this . study is to examine the unsatisfactory factors of the physical therapists and to obtain the materials necessary to comply with these factors by analysing their service performance and job satisfaction, To accomplish these purposes, this study was carried out by using the questionnaires 206 physical therapists registered in the Korean Physical Therapists Association, for 35 days from January 7 to February 10, 1990. The result of this study is summarized as follows. 1. Of total respondents, the male accounted for 54.4 percent, while the female for 45.6 percent. Their age showed that 20s accounted for 65.0 percent, while the service period less than 3 years accounted for 66.5 percent. In addition, 63.6 percent of them served at the general clinics. 2. The general clinics caused the physical therapists to serve for 10 hours or more per day, where their therapy room located in the underground accounted for 41.3 percent. Their health diagnosis status indicated that nondiagnosis accounted for 63.2 percent. The number of the served patients fer a day showed that 20-30 accounted for 37.4 percent, while 30 persons or more for 25.7 percent. 53.4 percent of total subjects was unsatisfied with their duty quantity. And, the monthly salary indicated that 500,000 or less accounted for 72.3 percent. 3. The average marks by their job satisfaction factors indicated 4.42 for duty importance, 4.02 for recognization of specialized job, 3.98 for ability exercise, 1.99 for promotion possibility, 2.28 for reasonable salary, and 2.41 for welfare system, respectively, based on 5 full marks. 4. The summarized job satisfaction by factors indicated that the relation with the doctor accounted for 57.8 percent, the satisfaction status with the existing job for 53.4 percent, the ability development for 41.8 percent, respectively, and the salary for 10.2 percent. Then, the satisfaction by sex showed that the male was generally satisfied with the ability development (p<0.05), the relation with the doctor (p<0.01), and the satisfaction with the existing job, while the female was satisfied with the duty quantity(p<0.05), salary, and the situation guarantee (p<0.05). On the other hand, the satisfaction by age indicated that the subject of the lower age were satisfied with the ability development (p<0.01), the relation with the doctor(p<0.05), the salary, and the situation guarantee. Also, the satisfaction by the service section showed that the physical therapists serving at the general hospital were satisfied with the ability development (p<0.01), the duty quantity (p<0.01), the salary(p<0.01), the situation guarantee(p<0.01), and the satisfaction with the existing duty (p<0.05), while the physical therapists at the hospital and the rehabilitation center were unsatisfied with the salary (p<0.01). In addition, The satisfaction with the service period at the existing section indicated that the physical therapists less than 3 years were highly satisfied with the ability development, the relation with the doctor, the situation guarantee, and the existing duty(p<0.05), while the physical therapists more than 6 years tended to show the lower satisfaction, And the satisfaction with the monthly salary indicated that the higher the monthly salary, the higher the satisfaction with the relation to the doctor(p<0.05), the duty quantity(p<0.01), the salary(p<0.01), and the situation guarantee (p<0.01). 5. The correlation between general characteristics and job satisfaction factors indicated that the sex was directly correlated to the marital status (r=-0.442), while it was reversely correlated to the age (r=-0.564) , total career (r=-0.229), and the relation with the doctor (r=-0.233). Additionally, the age was directly correlated to the total carreer (r=-0.677), and the service period at the existing section (r=0.491), while the age was reversely correlated to the marital status (r=-0.678). Accordingly, the higher job satisfaction of the physical therapists was related to factors such as their duty importance, recognization of specialized occupation, ability exercise, autonomy, relation to colleagues, decision-making's consideration, and relation with the doctor, while the lower job satisfaction includes the opportunity of promotion, salary, welfare system, service time, duty quantity, and situation guarantee. For this reason, if the factors of the lower job satisfaction are solved, then it will be possible to encourage the motive of these physical therapists, and the acyivate their duties. More over, it is also possible to improve the medical service, Additionally, if the general physical therapy room in the hospital and in the public health center are established, more development should be accomplished in the physical therapy.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.