• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.481-485
• /
• 2002

In this study, we fabricated the PBH-LD by meltback method using the LPE. The PBH-LDs are analyzed the leakage current that flows through leakage current path like the p-n diode and p-n-p-n current blocking layer. We observed the variation of threshold current with the leakage width $W_{ι}$. As a consequence, we confirmed that the threshold current became low in the decrease of the leakage width and in the increase of the ratio of specific resistivity of leakage region to active region. We also compared between the calculated threshold current in the absence of leakage region and the measured threshold current in the device. As a result, the ratio of specific resistivity was about 0.5 in the measured LDs, which have the width of a active layer of 1.4${\mu}{\textrm}{m}$ and leakage width of 0.6${\mu}{\textrm}{m}$.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.4 s.48
• /
• pp.677-691
• /
• 1994

To evaluate the validity of serum pepsinogen levels as a screening tool for gastric cancer and adenoma, immunoradiometric assays of serum pepsinogen I level (PG I), II level (PG II) and esphagogastroduodenal endoscopies were done in 757 health examinees. Serum PG I level was higher in subjects with active duodenal ulcer (n=45, $75.2{\pm}34.3{\mu}g/l(mean{\pm}standard\;deviation)$, p<0.01) and gastroduodenal ulcers (n=8, $75.6{\pm}19.8{\mu}g/l$, p<0.05), and was lower in those with gastric adenoma(n=4, $37.7{\pm}37.2{\mu}g/l$, p<0.2) than those with normal, mild gastritis findings or ulcer scars (n=378, $56.6{\pm}24.9{\mu}g/l$. Serum PG II level was higher in subjects with active duodenal ulcer($17.2{\pm}13.8{\mu}g/l$, p<0.2), active gastro-duodenal ulcers ($18.3{\pm}7.4{\mu}g/l$, p<0.2) and gastric carcinoma (n=3, $23.8{\pm}10.9{\mu}g/l$, p<0.05) than those with normal, mild gastritis findings or ulcer scars $(14.5{\pm}7.9{\mu}g/l)$. Serum PG I/PG II ratio was higher in subjects with active duodenal ulcer($5.1{\pm}1.6$, p<0.05) and was lower in those with chronic gastritis(n=107, $4.1{\pm}1.7$, p<0.05), gastric polyp(n=19, $3.9{\pm}1.4$, p<0.2), gastric adenoma(n=4, $2.1{\pm}1.9$, p<0.01) and gastric carcinoma(n=3, $2.7{\pm}1.2$, p<0.1) than those with normal, mild gastritis findings or ulcer scars ($4.5{\pm}1.7$). Serum PG II level increased with age until 6th decade, whereas serum PG I/PG II ratio decreased with age in 378 subjects with normal, mild gastritis findings or ulcer scars. The screening criteria of serum PG I<$70{\mu}g/l$ and PG I/PG II ratio<3.0 for detecting gastric cancer and adenoma gave a positive rate of 15.7%, sensitivity of 57.1% and specificity of 84.7%.

• Journal of Ecology and Environment
• /
• v.31 no.4
• /
• pp.291-295
• /
• 2008

Weight loss and nutrient dynamics of oak and pine leaf litter during decomposition were investigated from December 2005 through June 2008 at Mt. Worak National Park as a part of National Long-Term Ecological Research Program in Korea. The decay constant (k) of oak and pine leaf litter were 0.314 and 0.217, respectively. After 30 months decomposition, remaining weight of oak and pine leaf litter was 45.5% and 58.1%, respectively. Initial C/N ratio of oak and pine leaf litter was 53.4 and 153.0, respectively. Carbon % of initial oak and pine leaf litter was similar with each other; however, nitrogen content of initial oak leaf litter (0.85%) was greater than that of initial pine leaf litter (0.33%). N and P concentration in both decomposing leaf litter increased significantly during decomposition. There was no net N and P mineralization period in decomposing pine leaf litter. K, Ca and Mg concentration in both decomposing leaf litter showed different pattern with those of N and P. After 30 months decomposition, remaining nutrients in oak and pine leaf litter were 97.7 and 216.2% for N, 123.2 and 216.5% for P, 39.3 and 44.8% for K, 47.9 and 40.6% for Ca, 30.7 and 51.2% for Mg, respectively.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.6
• /
• pp.5-12
• /
• 2006

This study was conducted to investigate the effect of operational parameters such as dosage of magnesium and phosphate, pH, reaction time and existence crystal core for the removal of nitrogen and phosphorus in anaerobic fermentation supernatant by struvite crystallization. Optimal mole ratio of $Mg^{2+}:NH_4{^+}:PO_4{^{3-}}$ was 1.2:1.0:1.2. Under the optimal molar ratio, removal ratio and reaction rate constant of $NH_4{^+}-N$ and $PO_4{^{3-}}-P$ were 79.2, 96.8%, 0.157 and $0.344min^{-1}$, respectively. Optimal pH and reaction time were 11 and 10 minutes, respectively, in the optimal molar ratio. Residual concentration of $NH_4{^+}-N$ and $PO_4{^{3-}}-P$ showed lowest value with 1 g/L of crystal core addition. SEM analysis of struvite crystallization with crystal core showed higher crystal core growth than that of without crystal core. Struvite precipitate proved to be orthorhomic crystal structure by XRD analysis.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.801-807
• /
• 1994

Lactose substituted styrene monomer, N-(p-vinylbenzyl)-D-lactonamide(VLA) was prepared by coupling the lactose lactone with p-vinylbenzylamine. The carboxyl group of biotin was activated with N-hydroxysuccinimide in the presence of N, N'-dicyclohexylcarbodiimide. Subsquently, biotin substituted styrene monomer, N-(p-vinylbenzyl)-biotinamide(VBA) was prepared by amidation of the activated biotin with p-vinylbenzylamine. Poly(vinylbenzylactonamide-co-vinylbenzylbiotinamide), p(VLA-co-VBA) were synthesized through radical polymerization from the synthetic monomers(VLA-VBA) by using various mole ratio. The percentages of yield were 67~71%. The copolymers were found amphlphilic which had hydrophilic lactose, hydrophobic vinylbenzyl and biotin site within the structure. IR and $^{13}C-NMR$ analysis on the monomers and copolymer were carried out.

• Journal of agriculture & life science
• /
• v.44 no.1
• /
• pp.25-32
• /
• 2010

This study examined the effect of moisture level at ensiling on fermentation characteristics of barley and rye silage. The moisture levels, 60 (low; LM), 70(medium; MM) and 80% (high; HM), were controled by adding water or pre-wilting. Barley silage had higher pH and latate:acetate ratio in LM than the other treatments, but those of rye in MM were higher. The concentrations of lactate, total FA and acetate in HM were higher than the other treatments, but propionate concentration in LM was higher than HM. Total N concentrations of barley and rye were highest in MM and LM, respectively. The $NH_3-N$ concentration and total N:$NH_3-N$ ratio of barley were higher in HM than those in LM and MM. With increasing moisture content, buffering capacity of barley and rye silages increased, whereas decreased by increase of pH. There was a negative correlation between moisture content vs. pH of barley and rye silages. However, moisture content vs. the concentrations of total VFA and $NH_3-N$ and the ratio of total N:$NH_3-N$ had a positive correlation. Tn conclusion, the ideal moisture content of barley and rye for silage was 70-80%, but silage quality could be rapidly decreased by pre-wilting to 60% moisture content.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.9
• /
• pp.935-939
• /
• 2006

The biological nutrient removal from domestic wastewater with low C/N ratio is difficult. Therefore, this study was performed to examine effect of operational parameters such as air supply, hydraulic retention time, pH on the nitrogen removal by ammonia stripping and to increase influent C/N ratio without required carbon source. The ammonia stripping system used for the bench-scale experiment in laboratory had a dimension of 15 cm diameter and 150 cm height. The ammonia stripping reactors were classified into two types, type AS I and type AS II, according to there using or not media. Results of the research showed that the T-N removal efficiency of AS I using plastic media is slightly higher than AS II without media. In experimental condition of air supply 30 L/min and pH 12.5, T-N removal efficiencies increased as HRT of ammonia stripping reactor became longer from 8 hr to 36 hr. In experimental condition of HRT 36 hr, it was also found that the T-N removal efficiencies improved through increase of air supply. On the other hand, C/N ratio of wastewater was increased from average 3.9 to 5.4 by ammonia stripping.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.2
• /
• pp.32-37
• /
• 2001

The purpose of this study was to investigate the created liquid post-acid fermentation of usability of denitrification as exterior carbon sources by pH control. The time of acid fermentation of food waste, the slower loading capacity of organic matter, the faster decomposition rate, but the density of generation Volatile Fermentation Acids(VFAs), was weak and, $SBOD_{5}$ : ST-N rate and $SBOD_{5}/SCOD_{Cr}$ rate was low. Between TS and VS, VS was decreased to 4.5th day fast, and then was decreased slowly. 1.5 days after stating the experiments, $SCOD_{Cr}$, $SBOD_{5}$, STOC and $VFA_{s}$ was decreased of increased slowly, and then increased fast. And after showing the highest density, it was tended to decreased fast. At the time of $SBOD_{5}$ with the highest density, at $SBOD_{5}$ : ST-N ratio, $R_1$ was 303:1, $R_2$ was 319:1, $R_3$was the highest. After studying $SBOD_{5}$ : ST-N ratio and $SBOD_{5}/SCOD_{Cr}$ ratio, as a carbon source of biological denitrification it was profitable composition ratio.

• Geotechnical Engineering
• /
• v.12 no.5
• /
• pp.117-126
• /
• 1996

In spite of many advantages such as the simplicity in test procedure, Standard Penetration Test(SPT) results contain some errors caused by the variability of test equipment, instruments and test procedures. Especially, it is inevitable that the measured SPT hammer energy is different from the theoretical value because of energy loss. In this paper, the hammer energy level is measured during the performance of the field SPT in Korea by using a ultra-sonic system and PC.program. As the results of this study, the average hammer energy ratio of the R-P hammer and the Trip hammer is calculated at 64.2%, and at 75.0% respectively. The average energy ratio of the SPT for the R-P hammer is calculated at 46% and at 54% for the Trip hammer, by applying the rod energy ratio 0.72.

• Journal of the Korean Ceramic Society
• /
• v.30 no.2
• /
• pp.85-92
• /
• 1993

Oxynitride glasses in Na-Ca-Si-O-N system were prepared by melting at 135$0^{\circ}C$ for 2 hours in N2 gas. The effects of Si/Na mole ratio and the various Si3N4 contents were investigated. Stable oxynitride glasses can be obtained up to 9wt.% Si3N4 content in case the Si/Na mole ratio was 2.12 and 1.62, but $\beta$-Si3N4 was precipitated at 9wt.% Si3N4 content in case the Si/Na mole rtio was 1.12. Density (p), chemical durability, hardness (Hv), and fracture toughness (KIC) increased with increasing Si3N4 content. In cae the Si/Na mole ratio was 1.12, the increment of properties was remarkable but hardness and fracture toughness did not increase no longer owing to precipitation of $\beta$-Si3N4.