• Membrane Journal
• /
• v.19 no.1
• /
• pp.25-33
• /
• 2009

PES (polyethersulfone) membranes with highly enhanced their asymmetry were prepared by phase inversion process. The membranes were prepared by using PES/DMF (N,N-dimethylformamide)/TSA (p-toluenesulfonic acid)/PVP (polyvinylpyrrolidone) casting solution and water coagulant. The pre-coagulation of membrane surface which was induced by an addition of TSA as a demixing agent and PVP as a swelling polymer in the PES solution and humid exposure time, played a crucial role in determining morphological properties and the PWP (pure water permeation) performance. The PES solution was coated on polyester film under condition of 80% humidity for a while ($72{\sim}144$ sec) before immersing in a coagulation bath. The characterization of membranes was carried out by a capillary flow porometer, a FE-SEM and a permeation test apparatus. As the thickness of the smallest pore size layer (SPL) decreased, the asymmetry of membrane increased under conditions of 20 wt% of TSA and 10 wt% of PVP in 11 wt% of PES solution during longer humid contact time. As a result, the membranes showed a remarkable increase of PWP.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.4
• /
• pp.303-309
• /
• 2008

The reduction of risk within the workplace has long been focus of attention both through industry initiatives and legislation. Exposure matrices according to industries and processes treated DMF (N,N-Dimethylformamide) were constructed based on KOSHA (Korean Occupational Safety and Health Agency)'s 2005 exposure database which were gathered from Korean agencies of workplace hazards evaluation for business place. These exposure matrices were assessed by danger value (DV) that was calculated from combination of hazard rating, duration of use rating, and risk probability rating of exposure to chemical hazardous agents in accordance with Hallmark Risk Assessment Tool. The results of risk assessment is divided four kinds of control bands which were related with control measures. The applicability of risk assessment using exposure matrices was performed by field study and survey for high matrices group. This study found that more attentions should be paid to two industries, manufacture of sewn wearing apparel and manufacture of textiles, among 19 industries, and to 3 processes, coating, processing & mixing, and lab, among 80 processes because those were regarded as having the highest risk.

• Carbon letters
• /
• v.12 no.4
• /
• pp.207-217
• /
• 2011

We discuss the influence of few-walled carbon nanotubes (FWCNTs) treated with nitric acid and/or sulfuric acid on field emission characteristics. FWCNTs/tetraethyl orthosilicate (TEOS) thin film field emitters were fabricated by a spray method using FWCNTs/TEOS sol one-component solution onto indium tin oxide (ITO) glass. After thermal curing, they were found tightly adhered to the ITO glass, and after an activation process by a taping method, numerous FWCNTs were aligned preferentially in the vertical direction. Pristine FWCNT/TEOS-based field emitters revealed higher current density, lower turn-on field, and a higher field enhancement factor than the oxidized FWCNTs-based field emitters. However, the unstable dispersion of pristine FWCNT in TEOS/N,N-dimethylformamide solution was not applicable to the field emitter fabrication using a spray method. Although the field emitter of nitric acid-treated FWCNT showed slightly lower field emission characteristics, this could be improved by the introduction of metal nanoparticles or resistive layer coating. Thus, we can conclude that our spray method using nitric acid-treated FWCNT could be useful for fabricating a field emitter and offers several advantages compared to previously reported techniques such as chemical vapor deposition and screen printing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.272-272
• /
• 2010

We have fabricated alumina thick films by inkjet printing technology. Two different types of ink system were formulated in order to understand their evaporation behaviors and their evaporation effects on the powder distribution on, the surface during inkjet-printed alumina thick films. Single solvent system was formulated with N,N-dimethylformamide(DMF), which led to coffee ring effects which non-uniformly distributed alumina particles on the substrate during the ink evaporation. However, Co-solvent system which consists of both Water and DMF produced relatively uniform distribution of the particles on the substrate. We believe that these two different distributions of alumina particles are attributed to the ink fluid flow directions in the ink droplets ejected from the different ceramic ink system. We have modulated inkjet parameters such as dot-to-dot distance, line-to-line distance, jetting velocity and jetting drop size in order to find out the optimum condition for the printing of alumina thick films from two different ink systems. The surface roughness, microstructures and dielectric properties of these inkjet-printed alumina thick films were investigated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.20-21
• /
• 2008

Ferroelectric vinylidene fluoride-trifluoroethylene ($VF_2$-TrFE) copolymer films were directly deposited on degenerated Si ($n^+$, 0.002 $\Omega{\cdot}cm$) using by dip coating method. A 1 ~ 3 wt% diluted solution of purified vinylidene fluoride-trifluoroethylene ($VF_2$:TrFE=70:30) in a dimethylformamide (DMF) solvent were prepared and deposited on silicon wafers using dip coating method for 10 seconds. After Post-Annealing in a vacuum ambient at 100~200 $^{\circ}C$ for 60 min, upper aluminum electrodes were deposited by thermal evaporation through the shadow mask to complete the MFS structure. The ferroelectric $\beta$-phase peak of films, depending on the annealing temperature, started to show up around $125^{\circ}C$, and the intensity of the peak increased with increasing annealing temperature. Above $175^{\circ}C$, the peak started to decrease. The C-V characteristics were measured using a Precision LCR meter (HP 4284A) with frequency of 1MHz and a signal amplitude of 20 mV. The leakage-current versus electric-field characteristics was measured by mean of a pA meter/DC voltage source (HP 4140B).

• Journal of the Korean Chemical Society
• /
• v.25 no.3
• /
• pp.160-165
• /
• 1981

Radical copolymerization of the complexed 2-vinylpyridine with vinyl acetate and divinylbenzene initiated by azobisisobutyronitrile was carried out in N, N-dimethylformamide in presence of barium chloride at $98{\circ}C$. In the preparation of 2-vinylpyridine-vinylacetate-divinylbenzene terpolymer, the optimum reaction conditions were studied by means of various temperatures and times. 2-vinylpyridine-vinylalcohol-divinybenzene resin was prepared by transesterificating 2-vinylpyridine-vinylacetate-divinylbenzene terpolymer with a 1% methanolic sodium hydroxide solution. 2-Vinylpyridine-vinylphosphate-divinyldenzene was prepared by phosphorylating 2-vinylpyridine-vinylalcohol-divinylbenzene resin with phosphoric acid and urea. The compositions of each synthetic resin were identified by means of infrared absorption spectroscopy. The ion exchange capacities of each 2-vinylpyridine-vinylalcohol-divinylbenzene and 2-vinylpyridine-vinylphosphate-divinylbenzene terpolymer was 3.69 meq/g and 5.38 meq/g.

• Progress in Superconductivity
• /
• v.11 no.2
• /
• pp.87-91
• /
• 2010

We fabricated the polyacrylic acid (PAA)-doped $MgB_2$ bulks and characterized their lattice parameters, actual C substitutions, microstructures, and critical properties. The boron (B) powder was mixed with PAA using N,N-dimethylformamide as solvent and then the solution was dried out at $200^{\circ}C$ and crushed. The C treated B powder and magnesium powder were mixed and compacted by uniaxial pressing at 500 MPa, followed by sintering at $900^{\circ}C$ for 1 h in high purity Ar atmosphere. We observed that the PAA doping increased the MgO amount but decreased the grain size, a-axis lattice constant, and critical temperature ($T_c$), which is indicative of the C substitution for B sites in $MgB_2$. In addition, the critical current density ($J_c$) at high magnetic field was significantly improved with increasing PAA addition: at 5 K and 6.6 T, the $J_c$ of 7 wt% PAA-doped sample was $6.39\;{\times}\;10^3\;A/cm^2$ which was approximately 6-fold higher than that of the pure sample ($1.04\;{\times}\;10^3\;A/cm^2$). This improvement was probably due to the C substitution and the refinement of grain size by PAA doping, suggesting that PAA is an effective dopant in improving $J_c$(B) performance of $MgB_2$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.71-71
• /
• 2011

ZnO 반도체가 넓은 에너지띠와 큰 엑시톤 결합에너지를 가지기 때문에 가진 투명 전극, 태양전지, 발광소자 및 메모리와 같은 다양한 전자 및 광전자 소자의 응용에 대한 많은 연구가 활발히 진행되고 있다. 본 논문에서는 절연성 고분자인 폴리스티렌 박막에 분산되어 있는 ZnO 나노 입자를 기억 매체로 사용하는 write-once-read-many times (WORM) 메모리 소자를 제작하고 전기적 성질과 안정성에 대하여 관찰하였다. 화학적 방법으로 형성한 ZnO 나노입자와 폴리스티렌을 N,N-dimethylformamide 용매에 녹인 후 초음파 교반기를 사용하여 나노 복합 소재를 형성하였다. 하부 전극으로 indium-tin-oxide가 증착되어 있는 유리 기판 위에 나노 복합 소재를 스핀코팅 방법으로 도포한 후 열을 가해 잔류 용매를 제거하였다. ZnO 나노입자가 분산되어 있는 폴리스티렌 나노 복합 소재로 구성된 박막위에 상부 전극으로 Al을 열증착하여 메모리 소자를 제작하였다. 전류-전압 측정 결과에서 저전압에서는 전도도가 낮은 OFF 상태를 유지하다 약 1.5 V에서 전도도가 갑자기 증가하여 높은 전도도의 ON 상태로 전이되는 쌍안정성이 관찰되었다. 전류의 ON/OFF 비율은 약 103이며 ON 상태에서 OFF 상태로 전환되지 않는 전형적인 WORM 메모리 소자의 전류-전압 특성을 나타났다. 두 전극 사이에 폴리스티렌 박막으로만 제작된 소자를 제작하여 전류-전압 측정을 하였으나 메모리 특성이 나타나지 않았다. 그러므로 WORM 메모리 특성은 폴리스티렌 박막안의 ZnO 나노입자에 기인함을 알 수 있었다. 제작된 소자에 대해 기억 시간 측정 결과는 ON과 OFF 상태의 전류가 장시간에도 변화가 거의 없는 소자의 안정성을 보여주었다. 이 실험 결과는 ZnO 나노입자가 분산된 폴리스티렌 나노 복합 구조체를 사용하여 안정성을 가진 WORM 메모리 소자를 제작할 수 있음을 보여주고 있다.

• Macromolecular Research
• /
• v.17 no.9
• /
• pp.688-696
• /
• 2009

In this study, a new class of polyurethane (PU) nanofibers containing silver (Ag) nanoparticles (NPs) was synthesized by electrospinning. A simple method that did not depending on additional foreign chemicals was used to self synthesize the silver NPs in/on PU nanofibers. The synthesis of silver NPs was carried out by exploiting the reduction ability of N,N-dimethylformamide (DMF), which is used mainly to decompose silver nitrate to silver NPs. Typically, a sol-gel consisting of $AgNO_3$/PU was electrospun and aged for one week. Silver NPs were created in/on PU nanofibers. SEM confirmed the well oriented nanofibers and good dispersion of pure silver NPs. TEM indicated that the Ag NPs were 5 to 20 nm in diameter. XRD demonstrated the good crystalline features of silver metal. The mechanical properties of the nanofiber mats showed improvement with increasing silver NPs content. The fixedness of the silver NPs obtained on PU nanofibers was examined by harsh successive washing of the as-prepared mats using a large amount of water. The results confirmed the good stability of the synthesized nanofiber mats. Two model organisms, E. coli and S. typhimurium, were used to check the antimicrobial influence of these nanofiber mats. Subsequently, antimicrobial tests indicated that the prepared nanofibers have a high bactericidal effect. Accordingly, these results highlight the potential use of these nanofiber mats as antimicrobial agents.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.661-666
• /
• 2009

1-{2,4-Di-(2-hydroxyethoxy)phenyl}-2-(2-thienyl)ethene (5) was prepared and condensed with terephthaloyl chloride to yield polyester (6). Polymer 6 was reacted with tetracyanoethylene to give novel Y-type polyester (7) containing 1-(2,4-dioxyethoxy)phenyl-2-{5-(2,2,3-tricyanovinyl)-2-thienyl)}ethenyl groups as NLO-chromophores, which are parts the polymer backbones. Polymer 7 is soluble in common organic solvents such as acetone and N,N-dimethylformamide. It showed thermal stability up to 300 ${^{\circ}C}$ in thermogravimetric analysis with glasstransition temperature obtained from differential scanning calorimetry near 134 ${^{\circ}C}$. The second harmonic generation (SHG) coefficient ($d_33$) of poled polymer film at the 1560 nm fundamental wavelength was around 6.74 x $10^{-9}$ esu. The dipole alignment exhibited high thermal stability up to the glass-transition temperature ($Tg$), and there was no SHG decay below 135 ${^{\circ}C}$ because of the partial main-chain character of polymer structure, which is acceptable for NLO device applications.