• 전기의세계
• /
• 제23권3호
• /
• pp.67-69
• /
• 1974

The electric characteristics of all the instruments and materials used in atomic field is changed due to radiation damages by the effects of radio activities. In this study, when the condenser is radiated by Gamma-ray, variations in its electric properties have been investigated. The following results are obtained. (1) The capacitance in O.F paper condenser is exponentially increased as the quantity of irradiation by Gamma-ray is increased, but polyethylene, ceramic, chemical, neostyrene, mylar condenser are decreased. and in case of more than 10$^{7}$ of irradiation it has saturated state, (2) The breakdown voltage and the .delta. in condensers except the O.F paper condenser are exponentially increased as the quantity of irradiation by Gamma-ray is increased but in case of more than 10$^{7}$ .gamma. of irradiation it has decreased.

• Restorative Dentistry and Endodontics
• /
• 제21권1호
• /
• pp.360-365
• /
• 1996

The purpose of this study was to evaluate the changes in the degree of conversion on a composite resin surface following heat treatment and mylar strip finishing. The effects of the time interval between the light-curing and heat-curing process were also evaluated. The composite resin surface which had been covered with a coverglass showed a lower conversion rate than the surface from which a layer of $500{\mu}m$ was ground away. The composite resin surface was definitely affected by oxygen during the heat curing process when it had not been insulated. When the composite resins were heat cured after 3 days of storage following the light curing process, the increased in the degree of conversion through heatcuring was limited.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.647-650
• /
• 2002

A thermoacoustic refrigerator, using a resonant standing acoustic wave, has been built. It employs a loudspeaker to sustain a standing wave in a resonance tube. The stack of plates is 0.075mm-thick plastic sheet(Mylar), spirally wound to make a 40mm-diameter assembly 80mm long. and two heat exchanger are installed. The refrigerant is Helium gas. The description of thermoacoustic refrigerator are presented. The directly measured performance of the resonator. Tc/Th ( temperature ratio ) and $COP/COP_{c}$, (normalized by carnot's COP ) are plotted versus the thermal load Q applied to the cold end, for various speaker power.

• 비파괴검사학회지
• /
• 제25권6호
• /
• pp.446-450
• /
• 2005

We have built a spherically focused, not using acoustic mirrors, capacitive micromachined air-coupled ultrasonic transducer. A flexible backplate of a copper/polyimide backplate is used, permitting it to conform to a spherically shaped substrate. The backplate is patterned with $40-{\mu}m$ depressions having $80-{\mu}m$ center-to-center spacing. A $6-{\mu}m$ thick aluminized Mylar film completing the transducer is deformed to allow it to conform to the spherical backplate. The device's frequency spectrum is centered at 805kHz with -6dB points at 440 and 1210kHz.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.189-192
• /
• 2014

Recently, development of electric powered UAV for high altitude and long endurance mission has been conducted worldwide. Long endurance requirement necessitates high lift over drag (L/D) aerodynamic characteristics and lightweight structures, leading to highly flexible wings with high aspect ratio. These highly flexible wings increase the danger of catastrophic aircraft failure due to flutter, which is a dynamic aeroelastic instability occurring from the interaction of aerodynamic, inertial, and elastic forces acting on the aircraft flying through the air. In this paper, flexible wing for electric powered UAV whose skin is fabricated using mylar film for lightweight design is briefly explained. In addition, flutter analysis procedures and results for the flexible wing in order to substantiate the aeroelastic stability requirements are presented.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1988년도 광학 및 양자전자학 워크샵
• /
• pp.135-144
• /
• 1988

1-GW Iodine photodissociation Laser (λ=1.315${\mu}{\textrm}{m}$)is focused to generate the continuum x-ray radiation at titanium(z=22)target. A piced of aluminum(360 )-mylar(8${\mu}{\textrm}{m}$) film is used to isolate the soft X-ray radiation emitted. Convex-xurved mica crystal spectrometer is used to obtain the soft x-ray spectra from the laser titanium target plasma and the slope of continum X-ray spectra are found to show two different different electron effective temperaturres, 0.11keV and 7.1KeV. We compare the two temperature result with the foil absorption method.

• 분석과학
• /
• 제11권2호
• /
• pp.112-119
• /
• 1998

검정곡선을 작성하지않고 빠르게 분석할 수 있는 Siemens SemiQuant(SSQ) 3000 프로그램을 이용하여 여러 가지 형태의 고체 표준물질을 붕소부터 우라늄까지의 전 원소에 대해 신속한 X-선 형광분석을 하고 다양한 시료형태와 시료준비과정에 따른 정확도를 비교하였다. 시료당 75개의 원소분석에 소요되는 시간은 23분이 걸렸으며, 시료의 형태는 분말지질시료, 디스크형태의 금속시편 또는 chip형태의 금속 표준시료를 이용하였다. 분말지질시료는 압력을 가하지 않은 분말시료(loose powder)를 액체시료 측정 컵을 사용하여 mylar foil에 싸서 측정하거나 압력을 가해 펠렛형태로 만들거나 혹은 flux를 가해서 유리 bead시료를 만들거나 하여 여러 가지의 시료처리방법을 비교하였다. 금속시편의 분석결과는 분말지질시료에 비해 비교적 정확한 것으로 나타났다. 시료중의 모든 원소의 농도가 미지인 경우보다 철시편이나 스텐강과 같이 주원소의 농도범위를 대략적으로 알 수 있는 경우는 매질에 대한 매트릭스 효과를 계산해 줄 수 있기 때문에 좀더 정확한 결과를 얻을 수 있었다. 분말지질시료를 펠렛을 만들어 분석하는 경우와 유리 bead 시료를 만들어 측정하는 경우는 분말시료 그 지체 그대로 mylar foil에 싸서 측정하는 경우보다 시료준비과정이 간단하지 않고 많은 시간이 소요되지만 분석의 정확도는 더 높은 것으로 나타났다. 그러나 붕소나 탄소와 같은 가벼운 원소가 매트릭스로 존재하거나 이들의 분석이 요구되는 경우는 foil이나 헬륨기체에 의한 X-선 흡수 때문에 펠렛을 만들어 분석하는 것이 바람직하며 로듐 컴프턴 선을 이용하여 정확한 매트릭스 보정을 하였는지를 판단하였다.

• 마이크로전자및패키징학회지
• /
• 제27권4호
• /
• pp.97-105
• /
• 2020

최근 초고속 이더넷(ethernet)의 데이터 및 동작주파수 속도가 증가하고 있으며, 이에 따라 EMI(electromagnetic interference)가 증가하고 있다. 이러한 EMI의 발생은 주변 전자기기들에 영향을 미쳐 오동작 원인이 될 가능성이 높다. 본 연구에서는 고속 이더넷 스위치 EMI 발생의 주요 원인인 DC-DC SMPS (switching mode power supply)에서 발생하는 EMI 저감을 위해 EMI 필터를 적용하였다. EMI 필터소자는 소형화, 양산화에 장점을 가지며, 내전압(dielectric voltage) 특성이 우수한 MLCC (multi-layer ceramic capacitor)를 사용하였다. MLCC 필터는 X-커패시터 및 X, Y-커패시터로 구성되어 있다. X-커패시터는 10 nF 및 100 nF 용량의 2개의 MLCC와 1개의 마일러 콘덴서(mylar capacitor)로 구성하였다. Y-커패시터는 용량 27 nF의 6개의 MLCC를 사용하여 구성하였다. X-커패시터만을 EMI 필터로 적용한 경우, 전도성(conductive) EMI는 150 kHz ~ 30 MHz의 주파수 대역에서 EMI 전계강도가 허용 한계치를 초과함을 알 수 있었다. 또한 방사성(radiative) EMI도 특정 주파수에서 EMI 전계 강도가 높고, 허용 마진폭도 매우 적음을 알 수 있었다. 반면 X, Y-커패시터를 적용하였을 경우, 전 주파수 대역에서 전도성 EMI가 크게 감소하였으며, 방사선 EMI도 충분한 마진이 확보됨을 알 수 있었다. 또한 X, Y-커패시터의 전기적인 신뢰성을 평가하기 위하여 절연 저항(insulation resistance) 및 내전압 성능을 측정하였으며, 절연 저항 및 내저항 성능이 모두 전기적 신뢰성 기준을 만족함을 알 수 있었다. 결론적으로 MLCC 필터를 X, Y-커패시터로 사용하여 전도성 및 방사성 EMI 노이즈가 효과적으로 감소되었고, 우수한 전기적인 신뢰성도 확보됨을 알 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제14권1호
• /
• pp.149-159
• /
• 1989

The purpose of this study was to assess the effects of wavelength and intensity of light curing units on the curing of composite resin. The wavelength and intensity of nine units were evaluated with Optical Multichannel Analyzer and Radiometer. Two-part split stainless steel mold with a cylindrical hole-3.0mm in diameter, 6.0mm in hgieht-was prepared. After placing a Mylar strip between two parts, 100 specimens were made by inserting each of four composite resins into the mold and irradiating for 20 seconds with five light units alternatively. The curing depths were measured by scraping method and evaluated by two-way ANOVA. And Vicker's hardness measurements were made on the longitudinally sectioned surface at 0.5mm interval. The results were as follows: 1. Visilux 2 showed a narrow spectral band within the effective wavelength in initiating polymerization and the highest intensity. Translux showed the diffuse spectrum of wavelength and the lower light intensity. 2. Visilux 2 showed the highest curing effect in any composite resin and then followed by Optilux, Efos 35, Heliomat and Translux. (p < 0.01) 3. Durafill showed the deepest curing depth in any light unit and then followed by Bisfil M, Silux and Heliosit. (p < 0.01). 4. Maximum hardness values showed 0.1mm and 0.5mm under top surface and then gradually decreased with depth.

• Asian Journal of Atmospheric Environment
• /
• 제11권1호
• /
• pp.54-60
• /
• 2017

Quantifying the trace elements in infinitesimal ambient liquid samples (e.g., single raindrop, cloud/fog water, and the soluble fraction extracted from the particles collected for a short time) is an important task for understanding formation processes, heating/cooling rates, and their health hazards. The purpose of this study is to employ an in-air micro PIXE system for quantitative analysis of the trace elements in a thimbleful of reference liquid sample. The bag type liquid sample holder originally designed with $10{\mu}m$ thick $Mylar^{(R)}$ film retained the original shape without any film perforation and apparent peaks of film blank by the end of the analysis. As one of tasks to be solved, the homogeneity of the elemental distribution in liquid reference species was verified by the X-ray line profiles for several references. It was possible to resolve the significant peaks for whole target elements corresponding to the channel number of micro-PIXE spectrum. The calibration curves for the six target elements (Si, S, Cl, Fe, Ni, and Zn) in standard solutions were successfully plotted by concentration (ppm) and ROI of interest net counts/dose (nC).