• Journal of Korea Water Resources Association
• /
• v.43 no.2
• /
• pp.233-243
• /
• 2010

A method is proposed of estimating Muskingum-Cunge parameters for natural streams using cross-sectional and longitudinal channel geometry and roughness coefficient data. Firstly, for various water-surface levels at a cross section cross-sectional areas and hydraulic radii are calculated. Corresponding discharges are then calculated using Manning's equation. This procedure is repeated for all cross-sections in the reach. Finally, routing parameters are estimated from the calculated cross-sectional area and discharge value pairs by regression analysis. The procedures for estimating Muskingum-Cunge parameters are applied to the South Han River. Flows calculated by Muskingum-Cunge model with estimated parameters showed much better agreement with those by dynamic wave model in peak discharge, time to peak discharge, and normalized RMS errors than those calculated by the HEC-1 Muskingum-Cunge model.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.73-73
• /
• 2016

1차원 Saint-Venant 방정식을 이용한 동력학적 부정류 계산모형은 하도의 지형과 흐름에 대한 물리적 특성을 잘 반영하고 있지만 하폭이 좁고 경사가 큰 하천에서는 해의 안정성 문제를 갖고 있기 때문에 홍수 예 경보를 목적으로 하는 하도추적 방법으로 항상 적합하다 할 수 없다. 본 연구에서는 이러한 동력학적 부정류 계산모형의 대안으로서 확산파 모형의 수치해법으로 볼 수 있는 Muskingmum-Cunge 모형을 남한강에 적용하여 분포형 매개변수를 추정하는 방법을 제시하였다. 먼저 남한강의 상류인 충주 조정지댐부터 여주 수위관측소까지 가용한 각각의 횡단면에 대해 최심하상고에서 제방고까지 다양한 수위를 가정하고 수면폭과, 통수단면적 그리고 동수반경을 계산한 후 Manning 식을 이용하여 유량을 산정한다. 이때 각 단면별로 유량에 대한 통수단면적과 수면폭에 대하여 회귀분석 방법을 이용해 단면별 매개변수를 추정한다. 추정된 매개변수를 Muskingum-Cunge 모형에 적용하여 상류로부터 하류까지 각 단면별로 하도추적을 수행한다. 계산된 결과는 HEC-HMS Musking-Cunge 모형과 첨두유량의 크기 및 무차원 RMS 등을 비교하였을 때 동력학적 모형의 계산결과에 잘 일치함을 알 수 있다.

• Korean Journal of Hydrosciences
• /
• v.8
• /
• pp.41-56
• /
• 1997

A new routing computer model for the symmetric compound channel called the ASRMCS(Apparent Shear Force Muskingum-Cunge Method in Symmetry) has been developed. The Muskingum-Cunge routing method is adapted. The Apparent Shear Force (ASF) between the deep main channel and the shallow floodplan flow is introduced while the flow is routed. The nonlinear parameter method is applied. The temporal and spatial increments are varied according to the flow rate. The adaptation of above schemes is tested against the routed hydrographs using the DAMBRK model. The results of general routing practice of Muskingum-Cunge Method(GPMC) are also compared with those of above two models. The results of the new model match remarkably well with those of DAMBRK. The routed hydrographs show a smooth variation from the inflow boundary condition without any distortions caused by the difference of cross-section shape. However, the results of GPMC, showing early rise and fall of routed hydrograph, have considerable differences from those of the ASFMCS and DAMBRK.

• Water for future
• /
• v.29 no.3
• /
• pp.217-228
• /
• 1996

A new routing computer model for the symmetric compound channel called the ASFMCS (Apparent Shear Force Muskingum-Cung Method in Symmetry) is developed. The Muskingum-Cunge routing method is adapted. The Apparent Shear Force(ASF) between the deep main channel and shallow floodplain flow is introduced while the flow is routed. The nonlinear parameter method is applied. The temporal and spatial increments are varied according to the flow rate. The adaptation of above schemes is tested against the routed hydrographs using the DAMBRK model. The results of general routing practice of Muskingum-Cunge Method (GFMC) are also compared with those of the above two models. The results of the new model match remarkably well with those of DAMBRK. The routed hydrographs show smooth variation from the inflow boundary condition without any distortions caused by the difference of cross-section shape. However, the results of GPMC, showing earlier rising and falling of routed hydrograph, have considerable differences from those of the ASFMCS and DAMBRK.

• Water for future
• /
• v.18 no.3
• /
• pp.265-270
• /
• 1985

The prediction of a design-flood hydrograph at a particular site on a river may be based on the derivation of discharge or stage hydrograph at an upstream section, togeater with a method to route this hydrograph along the rest of river. On the other hand, flood routing methods provide a useful tool for the analysis of flooding in all but the smaller catchment, and these methods are largely stored into hydrological method and hydraulic method. Although the Muskingum Method as a hydrological method ignores dynamic effects on the flood wave, Muskingum-Cunge Method based on hydraulic method is possible to improve the method so that it gives a good approximation to the solution of the linear convective-diffusion equation. This is made on the basis of the finite diffeience equation for the Muskingum Method. In the study, the outflows predicted by Muskingum-Cunge Method are campared with the observed outflows of the Pyung Chang River.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.933-936
• /
• 2005

본 연구에서는, 수문해석모형과 국산 GIS 엔진인 HyGIS와 직접연계를 통해 자료수집 분석, 모의수행 및 결과도시를 일괄적으로 수행될 수 있도록 GIS-수문통합모형을 개발하였다. GIS 기반 수문모형의 자동화를 위해 유역 추출, 하도망 생성, 유출 매개변수의 산정 및 수문모형 진행을 필요한 모든 과정들에 대해서 사용자 인터페이스를 구축하고, 강우자료, 레이다/위성자료, 설계강우 조건으로부터 NGIS를 활용한 수문분석을 위한 NGIS자료의 표준화 과정을 제시하였다. 수문해석을 위한 유역추적방법에는 Clark, SCS, Snyder 방법, 하도추적방법에는 Muskingum, Muskingum-Cunge 방법 등과 같은 실제 실무분야에서 많이 이용되는 방법들이 이용 가능하도록 구성하였다. 수문모형과 NGIS DB와의 Interface 기능을 활용하여 국내 실무분야에 적용함에 있어 편의성과 실용성을 갖춘 모형을 개발을 통해, 수문모형 구축 시 NGIS 자료 및 지형 DB의 표준화 과정을 제시하고자 한다.