• Journal of Oral Medicine and Pain
• /
• v.14 no.1
• /
• pp.67-80
• /
• 1989

The author studied the changes of muscle activity with Bioelectric processor Model EM2(Myotronics Corp., USA) before and after occlusal stabilization splint therapy. For this study, 15 temporomandibular disorders patients and 15 students without any temporomandibular disorders symptoms were selected, for experimental group and control group, respectively. Experimental group were treated with occlusal stabilization splint and checked about electromyographic activity before and after therapy. Electromyographic levels were measured in both groups at the following mandibular position, i.e., physiologic rest, tapping, light biting, hard open without pain, open with pain, right excursion and ipsilateral biting, left excursion and ipsilateral biting, protrusion, protrusive biting, edge biting and physiologic rest after movement. The obtained results were as follows : 1. In experimental group, post-treatment mean values of muscle activity were lower than pretreatment values. 2. In general, the pre-treatment mean values of muscle activity in experimental group were higher than those of control group. 3. In experimental group, no statistically significant difference appeared between affected and unaffected side. 4. The mean value of muscle activity in physiologic rest position after each movement check was lower than that before each movement check.

• Journal of Korean Institute of Industrial Engineers
• /
• v.9 no.2
• /
• pp.9-25
• /
• 1983

The purpose of this study was to film up computerized analyses for both kinematic posture(film analysis) and muscle dynamics (EMG) during a weight-lifting motion. (Snatch, Clean and Jerk) Using a motor drive camera (3.5 frames/sec) and a Location Analyzer, motion tracks of 13 landmarks, which were attached to the major joints, during the motion were converted into digital values. At the same time, EMG amplitudes from 11 major muscle groups were recorded. Recorded data were processed via analog/hybrid computer (ADAC 480) and digital computer (PDP 11/44). Landmark locations and EMG amplitude were integrated by a computerized routine. Computer output included graphic reproductions on sepuential dislocations of body segments, center of gravity of body segments and the associated changes on EMG amplitude such as % EMG's of major muscle group during a weight lifting motion. The results strongly suggest that the computerized motion-EMG integration can provide a further working knowledge in selection and in training of workers and athletes. Suggestions for a further study include additional device for velocity measurement, expansion of the link model for biomechanical analysis and other implementations necessary for athletic application.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.398-401
• /
• 1997

The EMG signal of spinal cord injured patient is very feeble because that the information from central nervous system is not sufficiently transmitted to molter neuron or muscle fiber. Therefore the observer can not observe contraction and relaxation movement of muscle from the raw EMG signal. In this paper, we propose the muscle contraction and relaxation pattern analysis method of spinal cord injured patient whose EMG signal is composed of the sum of motor unit action potential train with additive white Gaussian noise and impulsive noise. From the EMG model, we denoise impulsive noise using median filter which is a kind of nonlinear filter and the output of median filter is transformed to wavelet transform domain for denoising additive white Gaussian noise using threshold level removal technique. As a result, we can obtain the clear contraction and relaxation pattern.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.11
• /
• pp.2040-2050
• /
• 2007

In this study, we present a novel method for estimating the information of MU(motor unit) which is the basic element of human muscle by using surface EMG. Some of the method developed in this field could only estimate the numbers of MU that is activated. However, in our study the MU-simulator based on the line source model was designed to estimate the MU information including the numbers of MU and muscle fiber, conduction velocity, MU diameter, fiber diameter, and end plate position. The SMUAP(single motor unit action potential) detector was designed and CMAP(compound muscle action potential) by electrical stimulus was recorded. With these data, the MU-simulator can estimate the MU information by varying muscle paramater settings through MSE(mean square error) method. Our results shows that the proposed method can be comparable with the method of anatomical studies. Moreover, our system can be utilized to build a tool for diagnosis and treatment assessment of neuromuscular patients.

• The Korean Journal of Ecology
• /
• v.27 no.1
• /
• pp.15-20
• /
• 2004

With attention to different human activities around Anzali wetland and introduction of different pollutants containing heavy metals into this water ecosystem and absorption and accumulation of heavy metals in shell and muscle of Astacus leptodactylus which is native benthose of Anzali wetland and enjoys food and economic importance; Sampling of waters and sediments from 18 stations and shell and muscle of Astacus leptodactylus from 5 stations had been conducted. After biometric evaluation of Astacus leptodactylus, the chemical analysis of the samples by using international and standard methods and then their heavy metals content was determined by Atomic Absorpotion Spectrophotometer (AAS), model P.U 9400 philips. Result of the analysis stated that; 1) The mean values of Cr, Zn, Pb, Ni, V in Anzali waters were 6.4, 184.5, 28.8, 28.9, 47.1 ($\mu$ gr/lit) respectively, which comparing to the international standards, is not suitable for drinking, but it can be used for agricultural and aquacultural purposes. Even though the concentration of heavy metals in sediments were high, there are in range of acceptable limit for aquatics organisms; 2) Comparatively, the concentration of heavy metals in shell and muscle of Astacus leptodactylus in Anzali wetland (Cr, Zn, Pb, Ni, V in shell were 3.48, 109.3, 14.13, 7.17, 36.2 and in muscle were 2.98, 131.98, 3.12, 4.77, 9.05 ppm respectively) were more than what is determined for Aras dam (in shell were 1.6, 224.3, 7.8, 7.6, 10.3 and in muscle were 1.4, 60.2, 0.45, 2.7, 4.4 mg/kgr respectively); 3) For all samples, concentration of heavy metals in all Astacus leptodactylus in Anzali wetland and Aras dam, was at tolerance level for human consumption; 4) There was no association with significant difference between weight and size of Astacus leptodactylus with absorption and accumulation of heavy metals; but there was a significant association between heavy metals content in water and in sediments, and in sediments, shell and muscle of Astacus leptodactylus in Anzali wetland.

• Molecules and Cells
• /
• v.28 no.6
• /
• pp.565-573
• /
• 2009

The pig could be a useful model to characterize molecular aspects determining several delicate phenotypes because they have been bred for those characteristics. The Korean native pig (KNP) is a regional breed in Korea that was characterized by relatively high intramuscular fat content and reddish meat color compared to other western breeds such as Yorkshire (YS). YS grew faster and contained more lean muscle than KNP. We compared the KNP to Yorksire to find molecular clues determining muscle characteristics. The comparison of skeletal gene expression profiles between these two breeds showed molecular differences in muscle. We found 82 differentially expressed genes (DEGs) defined by fold change (more than 1.5 fold difference) and statistical significance (within 5% of false discovery rate). Functional analyses of these DEGs indicated up-regulation of most genes involved in cell cycle arrest, down-regulation of most genes involved in cellular differentiation and its inhibition, down-regulation of most genes encoding component of muscular-structural system, and up-regulation of most genes involved in diverse metabolism in KNP. Especially, DEGs in above-mentioned categories included a large number of genes encoding proteins directly or indirectly involved in p53 pathway. Our results indicated a possible role of p53 to determine muscle characteristics between these two breeds.

• Journal of Korean Academy of Nursing
• /
• v.40 no.5
• /
• pp.611-619
• /
• 2010

The purpose of this study was to examine the effects of exercise on muscle weight and Type I and II fiber cross-sectional area of affected and unaffected hindlimb muscles in rats with neuropathic pain induced by unilateral peripheral nerve injury. Methods: Neuropathic pain was induced by ligation and cutting of the left L5 spinal nerve. Adult male Sprague-Dawley rats were randomly assigned to one of two groups: The Pain+Exercise (PE) group (n=21) and the Sham+Exercise (SE) group (n=20). All rats had 28 sessions of treadmill exercise at grade 10 for 30 minutes, twice/day at 10 m/min for 14 days. Body weight, food intake and activity were measured every day. At 15 days all rats were anesthetized and soleus, plantaris and gastrocnemius muscles were dissected. Muscle weight and Type I, II fiber cross-sectional area of the dissected muscles were measured. Results: The PE group showed significant increases (p<.05), as compared to the SE group for body weight and total diet intake, muscle weight of the unaffected soleus and plantaris, and in Type I and II fiber cross-sectional area of unaffected three muscles and affected plantaris. Conclusion: Exercise for 14 days attenuates unaffected soleus, plantaris and gastrocnemius muscle atrophy in neuropathic pain model.

• Journal of Ginseng Research
• /
• v.40 no.4
• /
• pp.334-343
• /
• 2016

Background: Progressed tissue culture techniques have allowed us to easily obtain mass products of tissue-cultured mountain ginseng over 100 yr old (TCMG-100). We investigated the effects of TCMG-100 extract on erectile function using in vitro and in vivo studies. Methods: To examine the relaxation effects and mechanisms of action of TCMG-100 on rabbit cavernosal strips evaluated in an organ bath. To investigate the long-term treatment effect of TCMG-100, 8-wk administration was performed. After administration of TCMG-100, intracavernosal pressure, cyclic guanosine monophosphate and nitric oxide (NO) levels of cavernosal tissue, serum testosterone level, histological observation of collagen fiber, endothelium, smooth muscle cell, and transforming growth factor-${\beta}1$ were investigated. Results: TCMG-100 extract displayed dose-dependent relaxation effects on precontracted rabbit corporal smooth muscle. The TCMG-100-induced relaxation was significantly reduced by removing the endothelium, and treatment with an NO synthase inhibitor or NO scavenger. Eight weeks of TCMG-100 administration increased intracavernosal pressure in a rat model. The levels of cyclic guanosine monophosphate and NO in the corpus callosum and serum testosterone level were also increased by TCMG-100 treatment. Furthermore, histological evaluation of collagen, smooth muscle, and endothelium showed increases in endothelium and smooth muscle, and a decrease in transforming growth factor-${\beta}1$ expression. Conclusion: These relaxation effects on corporal smooth muscle and increased erectile function suggest that TCMG-100 might be used as an alternative herbal medicine to improve erectile function.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.17 no.4
• /
• pp.245-256
• /
• 2001

The purpose of this study is to analyze the mechanical stress and displacement on the jaws during the simulated bilateral clenching task on the three-dimensional finite element model of the dentated skull with unilateral molar loss. For this study, the computed tomography(G.E.8800 Quick, USA) was used to scan the total length of human skull in the frontal plane at 2.0mm intervals. The fully assembled finite element model consists of the articular disc, maxilla, mandible, teeth, periodontal ligament and cranium. The FE model was used to simulate the bilateral clenching in intercuspal position. The loading condition was the force of the masseter muscle exerted on the mandible as reported by Korioth et al. degrees of freedom of the zygomatic region where the masseter muscle is attached were fixed as restraints. In order to reflect the actual action of the muscles force, the displacement of the region was attached where the muscle is connected to the temporal bone and restraint conditions were given values identical to values at the attachment region of the masticatory muscle but with the opposite direction of the reaction from when the muscle force is acted on the mandible. Although the mandible generally has higher displacement and von Mises stress than the maxilla, its mandibular corpus on the molar-loss side has a higher stress and displacement than the molar-presence side. Because the displacement and von Mises Stress was the highest on the lateral surface of mandibular corpus with molar loss, the stress level of the condyle on the molar-loss side is greater than that of the molar-presence side, which in turn caused the symphysis of the mandible to bend. In conclusion, the unilateral posterior bite collapse with molar loss under para-functional activities such as bruxism and clenching can affect the stress concentration on the condyle and mandibular corpus. It is therefore necessary to consider the biomechanical function of dento-skeleton under masticatory force while designing the occlusal scheme of restoration on alveolar bone with the posterior collapse.

• The Journal of Information Technology
• /
• v.8 no.1
• /
• pp.43-50
• /
• 2005

Quantitative analysis for distribution of penetrating ultrasound in vivo is very important to determine the treatment region and method. In this paper, we constructed a simplified 2-D femoral region model that consists of skin-fat-muscle-bone layered system, and simulated the pressure distribution in the model in case of applying ultrasound using Finite Element Method(FEM). The ultrasound used in the simulation was assumed to be pulse wave and the pressure distribution was analyzed during only one period of pulse wave. In order to find the penetration depth, amplitude of pressure and sphere that ultrasound reaches in the model, we performed the simulation with varying the applied frequency, transducer size and amplitude of transducer's output. The result showed that applied frequency is inversely proportional to the penetration depth and amplitude of pressure but the amplitude of transducer's output is proportional to the amplitude of pressure in the model. Also, the sphere that ultrasound reaches was widened and the amplitude of pressure became larger as the transducer size became larger. This results were similar to that obtained from the previous model consisting of fat-muscle-bone layered system, but we observed that the pressure of ultrasound is decreased due to the decrements of pressure by the absorption coefficient of skin and the interference that depends on the reflection of ultrasound caused by the difference of acoustic impedance of skin and fat. Finally, we can infer that the model proposed in this study is closer to the realistic model than the previous ones. It shows that the results obtained from this study can be useful in designing the ultrasound treatment instrument or in setting up the treatment plan.