• Journal of environmental and Sanitary engineering
• /
• v.10 no.3
• /
• pp.29-34
• /
• 1995

This study was on the characteristics and heating values analysis of municipal solid wastes according to the volume- rate garbage collection system in Busan. Each waste sample was analyzed to obtain physical composition, proximate analysis, heating value, chemical composition. And the heating value were compared with those of the past waste collection system. The average physical composition of A.P.T. area was food waste 54.0~65.7% , while that of common residence was food waste 57.9~61.2% . The density of solid waste were largely different for site and the highest densities of waste was $399.6kg/m^{3}$ from Market. The low heating value of waste from residence site was 996.9kca1/kg~1, 238.1 kcal/kg which was lower than 1, 000kcal/kg~1, 800kca1/kg of the past wastes. These difference was mainly due to the difference of moisture content and the amount of vegetables.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.69-74
• /
• 2002

Incineration method of municipal solid waste is the general method for reduction it's quantity and weight. Municipal solid waste incineration ash is classified two general types of ash : fly ash((MWFA) and bottom ash(MWBA)). MWFA containing a high degree heavy-metal may give rise to a serious environmental trouble. Therefore, this study was carried out to examine utilization of fly ash. In this study, we tried to find the recycling method of fly ash as a environmental-friendly artificial aggregate. The artificial aggregate using fly ash was tested for the various aspects, including physical properties and environmental stability. The qualities of artificial aggregate are similar to it of lightweight aggregate, and the heavy metal leaching concentration are very lower than a limitation of KSLT and EP.

• Korean Management Science Review
• /
• v.20 no.1
• /
• pp.65-76
• /
• 2003

The increased environmental concerns and the emphasis on recycling are gradually shifting the orientation of municipal solid waste (MSW) management. This paper is designed to evaluate regionalization programs for MSW management system. We developed a mixed intiger network programming (MIP) model to identify environment-friendly, cost-effective expansion plans for regionalization scenarios considered. The MIP model is a dynamic capacity expansion model based on the network flow model that depicts the MSW management cycle. In particular, our model is designed to determine the optimal form of regionalization using binary variables. We apply this model to assess the regionalization program of Seoul Metropolitan City, which includes three scenarios such as 1) districting, 2) regionalization with neighboring self-governing districts, and 3) g1obalization with all districts. We demonstrate how our model can be used to plan the MSW system. The results indicate that optimal regionalization with nearby self-governing districts can eliminate unnecessary landfills and expansions if jurisdictional obstacles are removed.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.664-667
• /
• 2001

Segregation of binary particle systems in a horizontally gyrated bed has been experimentally studied to recover the heavy metals from municipal waste incineration (MWI) ash. Differences in density and size had less effect on segregation. Effective segregation took place under the centrifugal effect of 1 or less for any particle size ratio. Zn, Cu and Pb were concentrated in the upper side of bed by the horizontal vibration. However, there was less change in concentration for other metals such as Mg, Al and Fe etc. The separation system with the horizontal gyrating separator proved to be an effective method for the pretreatment of recovering Zn, Cu and Pb from incineration residues.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.296-300
• /
• 2001

In order to recycle the incineration ash (bottom ash and fly ash) generated from the incineration of municipal waste for a cement material, salts as well as heavy metal should be removed by the stabilization treatment. Most of these heavy metal and over 80% of salts are removed by a washing as a pre-treatment. However, wastewater which is another pollutant is generated by a washing, then proper treatment should be developed. First the characteristics of incineration ashes collected from two domestic full-sized incinerators were investigated and removal rate of salts and heavy metals from them also studied. The wastewater quality was compared to the criteria of the regulation by analyzing the characteristics of generated wastewater during the washing of incineration ash as a condition of liquid/solid ratio. Also, we tried to used this experimental results for the basic data to develop proper processing technique of municipal waste.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.628-632
• /
• 2001

The removal rate of Cl from municipal solid waste incineration(MSWI) ash(bottom ash and fly ash) by washing was investigated. The Cl contents in the bottom ash and fly ash were 2.6-3.0% and 25-30% respectively, and KCl, NaCl, CaCIOH and friedel's salt were main components. From the results on the effects of washing time and temperature, the Cl contents in the bottom ash and fly ash were decreased up to 0.3% and 2.0% respectively by using of water as a solvent within 30 min at 2$0^{\circ}C$, 300 rpm of agitation speed and 10 of liquid/solid ratio. It is expected that the removal of Cl from the incineration ash by washing could make use of the ash for a cement raw material and so on.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.5
• /
• pp.561-572
• /
• 2010

The efficiency of biological hydrolysis at $80^{\circ}C$ on municipal solid waste mixed with anaerobic digestion sludge was investigated in 100L batch reactors. The hydrolysis effect was observed within a day, when the hydrolysis reactor used for a pre-treatment reactor for methanogenesis, and the effect was observed during two days, When the reactor used for post-treatment reactor. For both configurations, methane production rate decreased, when hydrolysis was carried out more than a day. Gaseous ammonia in the hydrolysis reactors was successtully removed by the ammonia stripping system. Microbial diversity analysis on the hydrolysis reactors indicated dependency of microbial diversity on the configuration of the hydrolysis reactors. Carbohydrate and lactate degrading microbes dominated in the hydrolysis reactor, when the hydrolysis reactor used for a pre-treatment reactor for methanogenesis, while protein degrading microbes dominated in the post-treatment reactor.

• Clean Technology
• /
• v.2 no.2
• /
• pp.100-125
• /
• 1996

After recycle of spent materials has been optimised, there remains a proportion of waste which must be dealt with in the most environmentally friendly manner available. For materials such as municipal waste, clinical waste, toxic waste and special wastes such as tyres, incineration is often the most appropriate technology. The study of incineration must take a process system approach covering the following aspects: ${\bullet}$ Collection and blending of waste, ${\bullet}$ The two stage combustion process, ${\bullet}$ Quenching, scrubbing and polishing of the flue gases, ${\bullet}$ Dispersion of the flue gases and disposal of any solid or liquid effluent. The design of furnaces for the burning of a bed of material is being hampered by lack of an accurate mathematical model of the process and some semi-empirical correlations have to be used at present. The prediction of the incinerator gas phase flow is in a more advanced stage of development using computational fluid dynamics (CFD) analysis, although further validation data is still required. Unfortunately, it is not possible to scale down many aspects of waste incineration and tests on full scale incinerators are essencial. Thanks to a close relationship between SUWIC and Sheffield Heat&Power Ltd., an extended research programme has been carried out ar the Bernard Road Incinerator plant in Sheffield. This plant consists of two Municipal(35 MW) and two Clinical (5MW) Waste Incinerators which provide district heating for a large part of city. The heat is distributed as hot water to commercial, domestic ( >5000 dwelling) and industrial buildings through 30km of 14" pipes plus a smaller pipe distribution system. To improve the economics, a 6 MW generator is now being added to the system.

• Korean Journal of Occupational Health Nursing
• /
• v.20 no.2
• /
• pp.172-184
• /
• 2011

Purpose: The aim of this study is to identify the characteristics of occupational accidents by work type among municipal sanitation workers. Methods: The original data of occupational accidents in 2009 by Korea Occupational Safety & Health Agency were analyzed by frequency and percentage using the SAS Version 9.1. Results: The types of occupational accident were as follows: slips and trips, falls, musculoskeletal disorders, traffic accident, collision, amputation, cut & puncture, crush injuries, strenuous movement and drop/fly. Slips and trips occurred most frequently in domestic waste collection and street sweeping. The traffic accident showed the highest incidence in food waste collection. Falls occurred most frequently in recycling waste collection. Musculoskeletal disorders showed the highest incidence in large waste collection. Conclusion: Depending on the work type, types of occupational accident were different. The results of this study can provide the information for the development of the occupational accident prevention programs of municipal sanitation workers.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.3
• /
• pp.48-53
• /
• 2013

Due to the urbanization, lots of people are living in cities. It is very convenient to live in the cities for the people but at the same time, the highly populated city has several environmental problems. During delivery process of large amount of municipal waste generated from the cities, the automobile emission and traffic jam have been occurred. The waste collection in the cities has been mainly done by using labour force and delivery truck. This is the conventional waste collection up to now. Recently, new technologies like automated waste collection system and capsule transportation have been introduced. Conventional waste collection mainly relied on the labour force and truck delivery does not need to invest a lot of money for the start-up. However, it requires to pay the operational cost both for the labour force and the truck delivery. On the contrary to this conventional waste collection, the automated waste collection and capsule transportation require high initial investment cost. However, the automated waste collection and capsule transportation can reduce significantly the pollutants emission, traffic jam by the waste trucks and actual waste collection cost per ton. In dealing with the waste collection in the cities, new waste collection technologies could be properly combined with the conventional waste collection for the effective municipal waste treatment.