• 동력기계공학회지
• /
• 제19권5호
• /
• pp.25-31
• /
• 2015

This study deals with optimal conditions for design parameters of the multistage bollard with up and down installed on the street to protect pedestrians or stop cars. FE simulation and Taguchi method are used to achieve the optimization for the automatic multistage bollard to minimize effective stress caused by the external force. Thickness, height of stage 2, diameter and over-all height which affect its structural strength are chosen as design parameters. According to the experiments combined by orthogonal array, each of the effective stresses is evaluated. And the results are analyzed by using the signal to noise ratio concept of Taguchi method. From their results, the optimal combination of design parameters are proposed.

• 동력기계공학회지
• /
• 제19권2호
• /
• pp.15-21
• /
• 2015

Bollard installed on the street is a facility that protects pedestrians by restraining cars from entering on the sidewalk. It is basically classified into manual, semiautomatic, automatic type and mostly manual type is widely used because the automatic type is imported and much expensive. However, in case of manual handling type in practice, it is very troublesome and difficult to remove it whenever cars are permitted, and in case of automatic type, since underbody of a bollard is very long, it is difficult to dig a deep hole in the ground because a pipe, a hose or a cable is under the surface. In order to reduce these difficulties, this paper proposed new design of the multistage bollard that moves up and down automatically by using hydraulic system. This is developed by 6 step creativity of TRIZ inventive problem solving and structural analysis. The developed bollard can be installed in shallow hole and allow entry of vehicles through up-and-down movement without its removal manually. Finally, we could see smoothly motion through the manufactured bollard.