• Imaging Science in Dentistry
• /
• 제53권1호
• /
• pp.53-60
• /
• 2023

Purpose: This study evaluated maxillary sinus volume changes in military jet aircraft pilot candidates before and after the training program, in comparison with a control group, considering the effects of pressurization, altitude, and total flight hours, through multislice computed tomography. Materials and Methods: Fifteen fighter pilots were evaluated before initiating the training program and after the final approval. The control group consisted of 41 young adults who had not flown during their military career. The volumes of each maxillary sinus were measured individually before and at the end of the training program. Results: When comparing the initial and final volumes in the pilots, a statistically significant increase was observed both in the left and right maxillary sinuses. When evaluating the average total volume of the maxillary sinuses(i.e., the average volume of the right and left maxillary sinuses together), a significant increase in the volume of the maxillary sinuses was observed in the pilot group when compared to the control group. Conclusion: The maxillary sinus volumes in aircraft pilot candidates increased after the 8-month training program. This may be explained by changes in the gravitational force, the expansion of gas, and positive pressure from oxygen masks. This unprecedented investigation among pilots might lead to other investigations considering paranasal sinus alterations in this singular population.

• Imaging Science in Dentistry
• /
• 제49권4호
• /
• pp.295-299
• /
• 2019

Purpose: This clinical pilot study was performed to determine the effectiveness of dual-energy cone-beam computed tomography (DE-CBCT) in measuring bone mineral density (BMD). Materials and Methods: The BMD values obtained using DE-CBCT were compared to those obtained using calibrated multislice computed tomography (MSCT). After BMD calibration with specially designed phantoms, both DE-CBCT and MSCT scanning were performed in 15 adult dental patients. Three-dimensional (3D) Digital Imaging and Communications in Medicine data were imported into a dental software program, and the defined regions of interest (ROIs) on the 3-dimensional surface-rendered images were identified. The automatically-measured BMD values of the ROIs (g/㎤), the differences in the measured BMD values of the matched ROIs obtained by DE-CBCT and MSCT 3D images, and the correlation between the BMD values obtained by the 2 devices were statistically analyzed. Results: The mean BMD values of the ROIs for the 15 patients as assessed using DE-CBCT and MSCT were 1.09±0.07 g/㎤ and 1.13±0.08 g/㎤, respectively. The mean of the differences between the BMD values of the matched ROIs as assessed using DE-CBCT and calibrated MSCT images was 0.04±0.02 g/㎤. The Pearson correlation coefficient between the BMD values of DE-CBCT and MSCT images was 0.982 (r=0.982, P<0.001). Conclusion: The newly developed DE-CBCT technique could be used to measure jaw BMD in dentistry and may soon replace MSCT, which is expensive and requires special facilities.

• Archives of Plastic Surgery
• /
• 제34권2호
• /
• pp.181-185
• /
• 2007

Purpose: Cleft lip and/or palate is the most common congenital facial anomaly whose incidence is about 1 in 500~1000 live births. As this anomaly may be associated with the serious chromosomal anomalies or the multiple organ abnormalities resulting in the fetal loss or perinatal maternal morbidity and mortality, careful prenatal counseling with early and accurate detection is important. Although conventional prenatal ultrasound(US) examination in midterm pregnancy has been applied for screening of cleft lip, there are definite limitations in the diagnosis of accompanying cleft palate or alveolar cleft. We applied high-resolution 3D US along the serial axial, coronal and sagittal plane so that we could diagnose the cleft palate and/or alveolar cleft in fetuses with cleft lip. Methods: From May 2005 to September 2005, 20 fetuses with cleft lip were examined with prenatal 3D US. Average maternal age was 28.8 years old(24-35 years old), and average gestational age was 24.8 weeks(17.6 to 34.2 weeks). Consecutive axial, coronal and sagittal multislice view were obtained via prenatal 3D US examination and diagnosis of cleft palate and/or alveolar cleft in cleft lip fetuses was followed. Results: With noninvasive and safe prenatal 3D US examination, 17 of 20 cleft lip fetuses were demonstrated to have cleft palate and/or alveolar cleft. Prenatal counseling according to the result was made. Conclusion: Existing prenatal US examination is suitable for screening the cleft lip fetuses but has limitation in identifying the related existence of cleft palate and/ or alveolar cleft. Authors verify the presence of cleft palate and/or alveolar cleft acquiring the successive multislice axial, coronal, and sagittal view with prenatal 3D US examination. Therefore, prenatal 3D US examination could be regarded as a noninvasive and secure screening modality in fetuses with cleft lip for confirming whether cleft palate and/or alveolar cleft is accompanied.

• Journal of Trauma and Injury
• /
• 제19권1호
• /
• pp.28-34
• /
• 2006

Purpose: In maxillofacial surgery, proper preoperative diagnosis is very important in achieving good postoperative results. Although conventional CT scans are useful for visual representations of fractures, they cannot provide direct guidance for reconstructing facial bone fractures. However, the recent technology of multislice scanning has brought many clinical benefits to CT images. Direct correlations can be made between preoperative imaging data and operative planning. The aim of the current study is to evaluate the differences between conventional CT and multidetective three-dimensional CT(3D MDCT) measurements in craniofacial deformities. Methods: From January 2005 to November 2005, MDCT scans of 41 patients were evaluated by comparing them with conventional CT scans. The 3D MDCT images were assessed and reviewed by using a simple scoring system. Results: The 3D MDCT scans offered easy interpretation, facilitated surgical planning, and clarified postoperative results in malar complex fractures, mandibular fractures, and extensive maxillofacial fractures and cranioplasty. However, 3D MDCT images were not superior to conventional CT scans in the diagnosis of blowout fractures. Conclusion: In spite of its limitations, the 3D MDCT provided additional and more comprehensive information than the conventional CT for preoperative assessment of craniofacial deformities. Therefore, the 3D MDCT can be a useful tool for diagnosis and systematic treatment planning in craniofacial skeletal deformities.

• 대한의용생체공학회:의공학회지
• /
• 제23권2호
• /
• pp.101-107
• /
• 2002

이 논문에서는 자기공명심장영상에서 내벽과 외벽의 추출을 위한 반자동 분할 알고리즘을 제안하였다. 이 알고리즘은 Generalized gradient vector flow snake와 초기 윤곽선 예측 과정을 기반으로 한다. 특히 이 알고리즘은 내벽과 외벽의 공간적인 특설을 이용하며 Cross profile correlation matching (CPCM)을 사용한다. 현재 공간에서의 이전 시간에 관계된 영상과 현재 시간에서의 공간에 관계된 영상을 사용하여 초기 윤곽선 예측을 더욱 효과적으로 수행하였다. Multislice와 multiphase의 Siemens와 GE. Medinus 자기공명심장영상을 사용하여 실험하였고 많은 영상들에 대해 충분히 만족할만한 결과를 얻었다. 그리고 분할한 결과로 quantitative analysis를 수행하였고 시각적으로 보여주었다. 개발된 소프트웨어는 Visual C++을 사용하여 windows 환경의 응용프로그램으로 개발되었다.

• Imaging Science in Dentistry
• /
• 제50권4호
• /
• pp.365-371
• /
• 2020

While silent sinus syndrome (SSS) is familiar to otolaryngologists and ophthalmologists, it is a rare clinical entity in dentistry and is likely to be underdiagnosed due to dentists' lack of awareness of this condition. SSS presents a diagnostic challenge to dentists, as patients typically have no history of trauma or sinusitis. The characteristic feature of SSS is a gradual retreat of the maxillary sinus walls, resulting in enophthalmos and hypoglobus. Multidetector (multislice) computed tomography is the imaging modality of choice for SSS and other paranasal sinus diseases. Cone-beam computed tomography promises to be an alternative low-dose imaging modality. This report describes 3 cases of SSS in adults, who had no identified clinical symptoms except diminutive and opacified maxillary sinuses, as well as the inward bowing of the sinus walls as noted on cone-beam computed tomographic imaging.

• 대한의용생체공학회:의공학회지
• /
• 제39권3호
• /
• pp.116-123
• /
• 2018

This study is a model experimental study using a phantom to propose an optimized brain CT scan protocol that can reduce the radiation dose of a patient and remain quality of image. We investigate the CT scan parameters of brain CT in clinical medical institutions and to measure the important parameters that determine the quality of CT images. We used 52 multislice spiral CT (SOMATOM Definition AS+, Siemens Healthcare, Germany). The scan parameters were tube voltage (kVp), tube current (mAs), scan time, slice thickness, pitch, and scan field of view (SFOV) directly related to the patient's exposure dose. The CT dose indicators were CTDIvol and DLP. The CT images were obtained while increasing the imaging conditions constantly from the phantom limit value (Q1) to the maximum value (Q4) for AAPM CT performance evaluation. And statistics analyzed with Pearson's correlation coefficients. The result of tube voltage that the increase in tube voltage proportionally increases the variation range of the CT number. And similar results were obtained in the qualitative evaluation of the CT image compared to the tube voltage of 120 kVp, which was applied clinically at 100 kVp. Also, the scan conditions were appropriate in the tube current range of 250 mAs to 350 mAs when the tube voltage was 100 kVp. Therefore, by applying the proposed brain CT scanning parameters can be reduced the radiation dose of the patient while maintaining quality of image.

• Journal of Korean Neurosurgical Society
• /
• 제45권5호
• /
• pp.284-288
• /
• 2009

Objective : Our retrospective study aimed to determine whether 16-slice computerized tomography (CT) angiography optimized sharp kernel is suitable for the evaluation of visibility, luminal patency and re-stenosis of intracranial stents in comparison with conventional angiography. Methods : Fifteen patients with symptomatic intracranial stenotic lesions underwent balloon expandable stent deployment of these lesions (10 middle cerebral arteries, 2 intracranial vertebral arteries, and 3 intracranial internal carotid arteries). CT angiography follow-up ranged from 6 to 15 months (mean follow-up, 8 months) after implantation of intracranial stents and conventional angiography was confirmed within 2 days. Curved multiplanar reformations with maximal intensity projection (MIP) with optimal window settings for assessment of lumen of intracranial stents were evaluated for visible lumen diameter, stent patency (contrast distal to the stent as an indirect sign), and re-stenosis by two experienced radiologists who blinded to the reports from the conventional angiography. Results : All of stents deployed into symptomatic stenotic lesions. All stents were classified as patent and no re-stenosis, which was correlated with results of conventional angiography. Parts of the stent lumen could be visualized in all cases. On average, 57% of the stent lumen diameter was visible using optimized sharp kernel. Significant improvement of lumen visualization (22%, p<0.01) was observed using the optimized sharp kernel compared with the standard sharp kernel. Inter-observer agreements on the measurement of lumen diameter and density were judged as good, respectively (p<0.05). Conclusion : Sixteen-slice CT using the optimized sharp kernel may provide a useful information for evaluation of lumen diameter patency, and re-stenosis of intracranial stents.

• Imaging Science in Dentistry
• /
• 제49권1호
• /
• pp.27-34
• /
• 2019

Purpose: The prevalence of supernumerary teeth has been reported to be between 0.1% and 3.8%. The aim of this study was to determine the prevalence, clinical significance, and associated pathologies of fourth molars based on a retrospective study and a literature review. Materials and Methods: A 5-year retrospective prevalence study was conducted at the Department of Oral Diagnosis and Dentomaxillofacial Radiology of Okayama University Hospital, Okayama, Japan. The study involved extracting data from the digital records of patients from January 1, 2013 through December 31, 2017. The sampling frame included all patients who had panoramic radiographs, cone-beam computed tomography (CT), and multislice CT images during the period under review. Results: A total of 26,721 cases were reviewed and 87 fourth molars were identified. The prevalence of fourth molars in the 5-year study at Okayama was calculated as 0.32%. The mean age of patients with a fourth molar was 30.43 years, and the male-to-female ratio was 1:0.98. The vast majority of cases were in the maxilla (92%) and had normal shapes(89.7%); furthermore, 82.8% of cases were unerupted. Conclusion: The prevalence of fourth molars in the study population was found to be 0.32%, and fourth molars occurred with approximately equal frequency in males and females. Fourth molars were more common in the maxilla and were predominantly unerupted and small.

• Journal of Radiation Protection and Research
• /
• 제35권2호
• /
• pp.63-68
• /
• 2010

방사선치료의 최대 목표는 정상조직을 보호하고 종양부위에 방사선량을 충분히 조사하는 것이다. 그 중에서 환자호흡에 의한 문제점을 보안하기 위해 환자호흡에 따른 주기적 움직임을 분석하여 안정된 일정영역에서만 방사선이 조사되도록 하는 호흡동조방사선치료 방법이 임상에서 활용되고 있다. 본 논문은 특히 호흡에 의해 움직임 영향을 많이 받는 간암 환자 40명을 대상으로 실제 방사선 치료 계획에 이용되는 4D-CT와 호흡동조방사선 치료에 사용하는 RPM을 이용하여 간암의 움직임을 환자의 나이, 성별 및 움직임 방향으로 나누어 분석하였다. 움직임의 변화는 방향으로는 right-left($3.19{\pm}1.29$), anteroposterior($5.44{\pm}2.07$), craniocaudal($12.54{\pm}4.70mm$)이었고, 이는 성별과 관련이 없고 나이가 고령일수록 움직임이 크다는 것을 알 수 있다. 따라서 호흡에 의해 움직임으로 인한 치료부위의 방향이 변화가 생김으로 RPM 호흡동조방사선 치료로 움직임에 대한 보정을 실시하여 간암 치료에서 치료효과를 높일 수 있다.