• 산업경영시스템학회지
• /
• 제21권46호
• /
• pp.19-32
• /
• 1998

This paper addresses the processing route of parts and economic design in flexible manufacturing systems (FMSs) employing AGVs for Transport. Parts are processed through several workstations according to operation sequences. The machine of each workstation can do multiple operation functions. The operation stage of a part can be processed in several workstations, which are non-identical in functional performance. The objective of this paper is to determine the processing route of parts, number of machines at each workstation, number of vehicles. The model is assumed that the operation stage of parts can be processed at the only one among several available workstations. Parts are transported by automated guided vehicle system(AGVS). The decision criteria is to minimize the sum of processing cost, travel cost, operating cost. A model formulation is represented. A solution algorithm is suggested by using mathematical programming and simulation technique, and a numerical example is shown.

• 품질경영학회지
• /
• 제28권1호
• /
• pp.78-94
• /
• 2000

The ever increasing demands for enhanced competitiveness of engineered products require a "designing-in-quality" strategy that can effectively and efficiently incorporate concepts of uncertainty, quality, and robustness into design. Engineered design optimization approaches that are typically carried out with respect to a single objective become inadequate to address these multiple set of requirements. This paper presents a design metric for a multi-attribute robust design problem with designer′s preferences on the performance accuracy and the performance precision. The use of this design metric as the robust optimal design criterion in multi-stage experimentation and modeling technique is presented. The effectiveness of the overall design procedure and the performance of the proposed design metric are tested with the aid of IC design and the results are discussed.

• 대한기계학회논문집A
• /
• 제26권12호
• /
• pp.2556-2564
• /
• 2002

The design of airfoil had practiced by repeat tests in its first stage, though an airfoil has as been designed based on simulations according to techniques of computational fluid dynamics. Here, using of traditional optimization is unsuitable because a state of flux is hypersensitive to the shape of airfoil. Therefore the paper optimized the shape of airfoil in transonic region using a genetic algorithm (GA). Response surfaces are based on back propagation neural network (BPN) and regression model. Training data of BPN and regression model were obtained by computational fluid dynamic analysis using CFD-ACE, and each analysis has been designed by design of experiments.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권4호
• /
• pp.708-719
• /
• 2015

The two most important tasks of icebreakers are first to secure a sailing route by breaking the thick sea ice and second to sail efficiently herself for purposes of exploration and transportation in the polar seas. The resistance of icebreakers is a priority factor at the preliminary design stage; not only must their sailing efficiency be satisfied, but the design of the propulsion system will be directly affected. Therefore, the performance of icebreakers must be accurately calculated and evaluated through the use of model tests in an ice tank before construction starts. In this paper, a new procedure is developed, based on model tests, to estimate a ship's ice breaking resistance during continuous ice-breaking in ice. Some of the factors associated with crushing failures are systematically considered in order to correctly estimate her ice-breaking resistance. This study is intended to contribute to the improvement of the techniques for ice resistance prediction with ice breaking ships.

• Earthquakes and Structures
• /
• 제9권5호
• /
• pp.1045-1067
• /
• 2015

A performance-based design (PBD) procedure, initially proposed for the seismic design of buildings, is tailored herein to the structural configurations commonly adopted in bridges. It aims at the efficient design of bridges for multiple performance levels (PLs), achieving control over a broad range of design parameters (i.e., strains, deformations, ductility factors) most of which are directly estimated at the design stage using advanced analysis tools (a special type of inelastic dynamic analysis). To evaluate the efficiency of the proposed design methodology, it is applied to an actual bridge that was previously designed using a different PBD method, namely displacement-based design accounting for higher mode effects, thus enabling comparison of the alternative PBD approaches. Assessment of the proposed method using nonlinear dynamic analysis for a set of spectrum-compatible motions, indicate that it results in satisfactory performance of the bridge. Comparison with the displacement-based method reveals significant cost reduction, albeit at the expense of increased computational effort.

• 시스템엔지니어링학술지
• /
• 제7권2호
• /
• pp.7-11
• /
• 2011

A high-speed railway system represents a typical example of large-scale multi-disciplinary system, consisting of subsystems such as rolling-stock, electrical hardware, electronics, control, information, communication, civil technology etc. The system design and acquisition data of the large-scale system must be the subject under strict configuration control and management. Systems engineering technology development project for Korea next generation High-speed Electric Multiple Unit (HEMU) system in progress is a national large system development project that is not only a large-size and complex but also multi-disciplinary in nature. Therefore, all stakeholders must understand and share the functional and performance requirements of HEMU throughout its life-cycle phases. Also in the test and evaluation phase, all systems requirements must be verified. In 2011, the prototype train manufacturing will be completed. It will do test run on the commercial line and all systems requirements are verified until 2012. For the system verification, the test and evaluation process have to be established before the test trial run. Using a systems engineering tool, the system design database(SDD) with requirements traceability and development process management in the course of the development have to be established. This paper represents the test and evaluation process development based on the SEMP(Systems Engineering Management Plan) developed in the design stage. The test and evaluation process is refined and updated in comparison to the design stage one. The test and evaluation process consists of procedure, test and evaluation method and schedule. So through this process, it is defined that each systems requirements is verified on which test and about what time.

• 대한전자공학회논문지
• /
• 제24권3호
• /
• pp.517-526
• /
• 1987

This paper proposes a new testable design for Zipper CMOS circuits. This design provides an additional feedback loop (called self oscillation loop) whichin the circuit, for testability. The circuit is tested only by observing the oscillation on the loop. The design can be applied to the multistage as well as the single stage, and can detect multiple faults which are undetectable by the conventional testing method. The application and evaluation of test patterns become easy and fault-free responses are not necessary. If the conventional testing method is applied to the sequential Zipper CMOS circuit with the LSSD design technique, it has the serious defect that the initial value may change due to intermediate test patterns and much time taken to apply the necessary test patterns. By using the proposed design, however, the sequential Zipper CMOS circuit with the LSSD design technique can be easily tested without such a defect. Also, the validity of the design is verified by performing the circuit level simulation.

• 전력전자학회논문지
• /
• 제6권4호
• /
• pp.307-316
• /
• 2001

본 논문에서는 직류 특성과 절전 모드에서 비절전 모드 변환과 같은 부하 변동 시의 동특성을 동시에 개선할 수 있는 가중치 전압 제어를 적용한 PC 전원용 다중출력 포워드 컨버터를 설계하였다. 기생성분을 포함한 전력회로를 모델링하고 소신호 해석하였으며, 가중치 결정 방법과 전압 보상회로 설계 방법을 제시하였다. SABER 시뮬레이션과 실험을 통해 제안한 방법이 PC 전원의 직류 특성과 동특성을 향상시킴을 입증하였다.

• 한국자동차공학회논문집
• /
• 제10권5호
• /
• pp.98-106
• /
• 2002

The airflow characteristics of an air-conditioning duct with multiple diffusers were investigated through one-dimensional analysis, CFD simulation and experimental measurement. One-dimensional program based on Bernoulli's equation and minor loss equations was developed in order to evaluate the air distribution rate at each diffuser. In CFD simulation, three-dimensional flow characteristics inside air-conditioning duct were computed for incompressible viscous flow, adopting the RNG k-$\xi$turbulence model. Also, in an effort to equalize the discharge flow rate at each outlet, the optimization procedure has been performed to obtain the optimum diffuser area. In this process, square of difference between maximum discharge rate and minimum discharge rate is used as an object function. Diffuser area and discharge velocity are established as constraints. After optimization process, determined design variables are applied again in CFD simulation and experiment to validate the optimized result by one-dimensional program. Comparison with the experimental data of airflow rate distribution showed that the developed program seems to be acceptable and can be useful design tool for an automotive air-conditioning duct in an initial design stage.

• 한국의류학회지
• /
• 제40권4호
• /
• pp.600-614
• /
• 2016

This study specifies the definition and characteristics of fake fashion by categorizing cases through an analytical framework that uses the concept of simulacre, which is one of the theories that explains the reproduction of images and symbols in a modern consumer society. The presentation stages of modern fake fashion based on Baudrillard's concept of simulacre are as follows: Stage 1 focuses on the realistic imitation of the original, Stage 2 maintains a similarity with the original while transforming through the distortion of shape or visual perception, Stage 3 is the reality of the original which has become significantly vague and actively involves the designer's creativity, and Stage 4 forms a new value and an independent aura beyond reproducing the original. The presentation techniques of modern fake fashion viewed in the concept of simulacre can be classified into optical illusions by reproduction, use of a fake object, use of unusual shapes, and re-signifying through borrowing. As a result of applying the collected cases to the analytical framework, image reproduction in Stage 1 with imitative nature is a counterfeit that cannot be regarded as fake fashion, and fake fashion in Stage 4 (that can be referred to as simulacre) is fashion with symbolic and multiple meanings with new and creative designs. Modern fake fashion analyzed in the concept of simulacre transforms or reproduces the preexisting original with the purpose of merely creating original designs as well as acts as a new symbolic signal that creates a new aura and sets a trend with a message.