• Korean Journal of Optics and Photonics
• /
• v.10 no.5
• /
• pp.373-378
• /
• 1999

White light scanning interferometry is increasingly used for precision profile metrology of engineering surfaces, but its current application is primarily limited to opaque surfaces with relatively simple optical reflection behaviors. In this paper, a new attempt is made to extend the interferometric method to the thickness profile measurement of transparent thin film layers. An extensive frequency domain analysis of multiple reflection is performed to allow both the top and bottom interfaces of a thin film layer to be measured independently at the same time using nonlinear least squares technique. This rigorous approach provides not only point-by-point thickness probing but also complete volumetric film profiles digitized in three dimensions.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.2
• /
• pp.154-160
• /
• 2006

Instantaneous reaction and intelligence are required for autonomous mobile robots to achieve multiple goals in the unpredictable and dynamic environments. Design of the appropriate control architecture and clear definitions of systems are needed to construct and control these robots. This research proposes the hybrid deliberative/reactive control architecture which consists of three layers and uses the method of software structure design. The highest layer, Deliberative Layer makes the overall run-time schedule for navigation and/or manipulation, and the middle layer, Task Execution Layer carries out various missions. The lowest layer, Reactive Layer enables a robot to react rapidly in the dynamic environment and controls the mechanical devices concurrently. This paper proposes independent system supervisors called Manager to reuse the modules so that the Manager supports common use of the system and multi-processing tasks. It is shown that the mobile robot based on the proposed control scheme can perform the basic navigation and cope with the dynamic obstacles reasonably well.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.185-197
• /
• 1996

We have adopted the strain compensated PBH(planar buried heterostructure) - LD in which the MQW active layer consisted of 1.4% compressively strained GainAsP (E$_{g}$ = 0.905eV) wells and 0.7% tensile strained GaInAsP(E$_{g}$ = 1.107eV) barriers grown by metal organic vapor phase epitaxy (MOVPE). We hav einvestigated effects of number of wells and the structure of the separate confinement heterostructure (SCH) layer in the strain-compensated MQW-PBH-LD. The threshold current, the external quantum efficiency, the transparency current density J$_{o}$, and the gain constant .beta. have been evaluated for uncoated MQW-PBH-LD. As the number of wells increases, the internal quantum efficiency and the transparency current density decreases, whereas the gain contant increases. The small width of the SCH layer shows the large internal quantum efficiency. The small internal loss and the large gain constant have been obtained by inserting the large bandgap SCH layer.

• Korean Journal of Cleft Lip And Palate
• /
• v.6 no.1
• /
• pp.53-58
• /
• 2003

Lateral facial cleft is a rare congenital craniofacial anomaly. Their incidence is about 1 in 60,000 births and early treatment with closure in layers is important. Surgical treatment must reconstruct an anatomic and functional situation which give a good esthetic result. This study reports two cases of male at 31 months and 9 months suffered from esthetic problems due to lateral displacement of the oral commisure on the right side. Surgical treatment; the mucosa is closed in with a Z-plasty to avoid intraoral band contracture, the orbicularis oris muscle is closed after interfiber reorientation, and the skin is closed with multiple Z-plasty. So we report two cases of unilateral lateral facial cleft and review of etiopathogenesis in children with lateral facial cleft.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1418-1420
• /
• 2008

In this paper, the light emitting efficiency, spectrum, and the lifetime of the phosphorescent devices, whose emission characteristics are strongly dominated not only by the energy transfer but also by the charge carrier trapping induced by the emissive dopant, are explained by differences in the energy levels of the host, dopant, and nearby transport layers. On the basis of our finding on device performance and photocurrent measurement data by time-of-flight (TOF), we investigated the effect of the difference of carrier trapping dopant and properties of the host materials on the efficiency roll-off of phosphorescent organic light emitting diode (OLED), along with a physical interpretation and practical design scheme, such as a multiple host system, for improving the efficiency and lifetime of devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.11
• /
• pp.2836-2849
• /
• 1996

Over ATM network, variable bit rate(or VBR) traffic is allowed. Control of VBR traffic is allowed. Control of VBR traffic becomes difficult if it is bursty. VBR video traffic becomes so much bursty during intra frame period that much cell loss would occur when satistical multiplexed in ATM swich. To aviod cellloss, extra communication resources should be allocated, which reduces the capability of an ATM channel. In this paper, we propose two methods which enable a channel limited in resources to serve more VBR MPEG video bit streams. Firstly, we could redue the bitrate fluction of a statiscally multiplexed bundle of VBR video bit streams by reducing the number of intra frames overlapped at the same frame period. This method can be used in ATM switch which controls multiple video sources. Secondary, in two layer enoding, statistical multiplexing gains can be icreased by letting peak bit rate durations of both layers not be overlapped. This results in more smooth traffic. The performance of proposed methods are demonstrated by a proposed calculation method of statistical multiplexing gains(or SMGs.) The proposed SMG is based on both delay and cell loss QoS requirements at the same time.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.2
• /
• pp.215-227
• /
• 2012

This study aims to analyze the influences of LOHAS cuticle management, which based on LOHAS consciousness among customers using nail art shops and removes only Cuticle layer without Eponychium, on the preference and expected value of service quality. Further, it tackles how above related variables have important bearing on reuse intention. A survey was conducted only with customers over the age of 20 in Seoul, Daejeon and Daegu areas in terms of LOHAS consciousness. For the collected 389 data, frequency analysis, t-test, ANOVA, correlation analysis and multiple regression analysis were carried out by using SPSS 18.0 Version statistical package. The results are as follows. First, according to the results, it shows high positive correlation between LOHAS cuticle management based on the consciousness of LOHAS, and LOHAS cuticle management preference, tendency and willingness to transfer toward it. Second. it is proven that LOHAS consciousness tend to be possessed in older age groups, married and a professional employee layers and this LOHAS motivated groups showed high LOHAS cuticle management preference, inclination and intention of a change in management. Lastly, the reuse intention is mostly affected by experience and preference of LOHAS cuticle management. There is negative correlation between reuse intention and experience in blooding and pain during care service. Higher interest in preference of LOHAS cuticle management has highly influenced positive link with the repurchase intention.

• Journal of The Korean Astronomical Society
• /
• v.47 no.6
• /
• pp.209-214
• /
• 2014

In this study we develop a set of solar proton event (SPE) forecast models with NOAA scales by Multi Layer Perceptron (MLP), one of neural network methods, using GOES solar X-ray flare data from 1976 to 2011. Our MLP models are the first attempt to forecast the SPE scales by the neural network method. The combinations of X-ray flare class, impulsive time, and location are used for input data. For this study we make a number of trials by changing the number of layers and nodes as well as combinations of the input data. To find the best model, we use the summation of F-scores weighted by SPE scales, where F-score is the harmonic mean of PODy (recall) and precision (positive predictive value), in order to minimize both misses and false alarms. We find that the MLP models are much better than the multiple linear regression model and one layer MLP model gives the best result.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1853-1856
• /
• 2003

Multi-layer printed circuit board(PCB) is being used widely for the product with relatively complex circuits such as TV, VTR and FAX. With the rapid enlargement of electronic and IT industry, the hole machining technology on multi-layer PCB is increasingly required to improve. Thus, the micro drilling with ultrasonic vibration can be a good method for hole machining. Unlike conventional drilling, ultrasonic vibration applied drilling introduces less wear and fracture of not only tool but also internal surface of workpiece due to little cutting resistance, thus, machinability can be improved. The experiment is conducted through the comparison between the results of conventional drilling and ultrasonic micro drilling as well as among each results by the variation according to not only feed rate of drill but also amplitude and frequency of ultrasonic vibration. The multi-layer PCB consists of 6 layers and ${\Phi}$0.3 diameter drill was used. As a result, it was found that the state of internal surfaces of holes on multiple layer PCBs is improved by the application of ultrasonic vibration.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.5
• /
• pp.89-96
• /
• 2012

The Falling Weight Deflectormeter has been widely used in evaluating the structural adequacy of pavement structures. The deflections measured from the FWD are capable of estimating the stiffness of pavement layers and measuring the pavement responses in the pavement structure. The objective of paper is to develop the pavement response model using a partial least square regression technique based on the FWD deflection data. The partial least square regression method enables to solve the multicollinearity problem occurred in multiple regression model. It is also found that the pavement response model can be developed using the raw data when a partial least square regression was used.