• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.65-80
• /
• 2007

The input and output device requires precise color representation and CMS (Color Management System) because of the increasing number of ways to apply the digital image into electronic publishing. However, there are slight differences in the device dependent color signal among the input and output devices. Also, because of the non-linear conversion of the input signal value to the output signal value, there are color differences between the original copy and the output copy. It seems necessary for device-dependent color information values to change into device-independent color information values. When creating an original copy through electronic publishing, there should be color management with the input and output devices. From the devices' three phases of calibration, characterization and color conversion, the device-dependent color should undergo a color transformation into a device-independent color. In this paper, an experiment was done where the input device used the linear multiple regression and the sRGB color space to perform a color transformation. The output device used the GOG, GOGO and sRGB for the color transformation. After undergoing a color transformation in the input and output devices, the best results were created when the original target underwent a color transformation by the scanner and digital camera input device by the linear multiple regression, and the LCD output device underwent a color transformation by the GOG model.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.320-326
• /
• 2016

In existing literature on multiple-input multiple-output (MIMO) relaying communication systems, antenna selection is often implemented by maximizing the channel capacity or the output single-to-noise ratio (SNR). In this paper, we propose an energy-efficient low-complexity antenna selection scheme for MIMO relaying communication systems. The proposed algorithm is based on beamforming and maximizing the Frobenius norm to jointly optimize the transmit power, number of active antennas, and antenna subsets at the source, relaying and destination. We maximize the energy efficiency between the link of source to relay and the link of relay to destination to obtain the maximum energy efficiency of the system, subject to the SNR constraint. Compared to existing antenna selection methods forMIMO relaying communication systems, simulation results demonstrate that the proposed method can save more power in term of energy efficiency, while having lower computational complexity.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.999-1004
• /
• 2004

In this study, we identify contribution of structure-borne-noise of vehicle HVAC system using Multi-Dimensional spectral analysis (MDSA) method. Firstly, to identify the applicability of MDSA method, the case of HVAC system was modeled with four input / single output system. The four inputs which is given vibration data is composed of blower, evaporator, heater and duct. The single output is noise data from driver's seat. When the blower motor is operating, we analyze the contributions of four input / single output. As a result of experiment, we identify efficiency of systems modeled with four input / single output through ordinary coherence function (OCF) and multiple coherence function (MCF).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.288-300
• /
• 2002

In this paper, a novel method of equalization of RF transceivers is suggested for MIMO(Multiple Input Multiple Output) antenna actively studied for high speed data transmission in the recent IMT-2000 system. The core of suggestion is in equalizing the transfer characteristics of multiple transceivers using feedback and memory during the predefined calibration time. This makes it possible to weight the signals in the intermediate frequency, which is easier in the application of recently developed DoA(Direction of Arrival) algorithms. In addition, the time varying optimum cell formation according to traffic is feasible by antenna beam-forming based on the DoA information. The suggested method of equalizing multiple transceivers are successfully verified using envelope simulation. two outputs. This paper is concerned with the diagnosis of multiple crosstalk-faults in OSM. As the network size becomes larger in these days, the convent.
nal diagnosis methods based on tests and simulation be.
me inefficient, or even more impractical. We propose a simple and easily implementable alg？ithm for detection and isolation of the multiple crosstalk-faults in OSM. Specifically, we develop an algorithm for isolation of the source fault in switc.
ng elements whenever the multiple crosstalk-faults are.
etected in OSM. The proposed algorithm is illustrated by an example of 16$\times$16 OSM.

• Korean Management Science Review
• /
• v.15 no.2
• /
• pp.125-142
• /
• 1998

The aggregation on linear large-scale dynamic systems is examined in this paper and a "two-step" approach is proposed. In this procedure, the aggregated system consists of two subsystems. The first subsystem represents aggregation through the retainment of dominant eigenvalues of the original system, leading to a first approximation of the desired output of the original system. The purpose of augmenting it with a second subsystem is to provide an estimation of the error on the first approximation, thus permitting a second correction to the output approximation and resulting in an output approximation of greater accuracy. Optimization techniques are discussed for the determination of unknown parameters in the aggregated system. These techniques use minimization principles of certain suitable performance indices and are developed for both single input-single output and multiple input-multiple output system. Numerical examples illustrating these procedures are given and the results are compared with those obtained using existing methods. Finally, a pharmacokinetics problem is studied from the aggregation point of view.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.242-245
• /
• 1995

In this paper the multiple three rectifiers for the power factor correction are proposed, analyzed and designed. The multiple three phase rectifiers draw sinusoidal ac currents from the ac voltage sources with nearly unity input power factor and operate with PWM making the control circuit simple and system cost low. Outstandingly it reduces the rated power capacity of devices and the input filter size by reducing input current ripples. Moreover design rules can be obtained from input and output current equations. With the proposed rules, input power factor and output power capacity are determined approximately. Finally these design rules are verified with computer simulations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.12
• /
• pp.5015-5027
• /
• 2015

Transceiver optimization in multiple input multiple output (MIMO) cognitive systems is studied in this paper. The joint transceiver beamformer design is introduced to minimize the transmit power at secondary base station (SBS) while simultaneously controlling the interference to primary users (PUs) and satisfying the secondary users (SUs) signal-to-interference-plus-noise ratio (SINR) based on the convex optimization method. Due to the limited cooperation between SBS and PUs, the channel state information (CSI) usually cannot be obtained perfectly at the SBS in cognitive system. In this study, both perfect and imperfect CSI scenarios are considered in the beamformer design, and the proposed method is robust to CSI error. Numerical results validate the effectiveness of the proposed algorithm.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.481-482
• /
• 2007

This paper demonstrates OFDM with adaptive modulation applied to Multiple-Input Multiple-Output (MIMO) systems. We apply an optimization algorithm to obtain a bit and power allocation for each subcarrier assuming instantaneous channel knowledge. The analysis and simulation is considered in two stages. The first stage involves the application of a variable-rate variable-power MQAM technique for a Single-Input Single-Output(SISO) OFDM system. This is compared with the performance of fixed OFDM transmission where a constant rate is applied to each subcarrier. The second stage applies adaptive modulation to a general MIMO system by making use of the Singular Value Decomposition to separate the MIMO channel into parallel subchannels. For a two-input antenna, two-output antenna system, the performance is compared with the performance of a system using selection diversity at the transmitter and maximal ratio combining at the receiver.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.10
• /
• pp.61-67
• /
• 2004

The next generation cellular wireless communication systems require high data rate transmissions and large system capacities. In order to meet these requirements, multiple antennas can be used at the base and mobile stations, forming MIMO(Multiple Input Multiple Output) channels. This paper proposes a MIMO SDMA(Space Division Multiple Access) technique with dynamic slot allocation which allows the transmitter to efficiently transmit parallel data streams to each of multiple receivers. The proposed technique can increase system capacities significantly by transmitting a larger number of data streams than conventional MIMO techniques while minimizing the performance degradation due to the beamforming dimension reduction.

• Journal of electromagnetic engineering and science
• /
• v.14 no.4
• /
• pp.349-352
• /
• 2014

This paper considers the multiple-input multiple-output (MIMO) system with linear minimum mean square error (MMSE) detection under ideal fast fading. For $N_t$ transmit and $N_r({\geq}N_t)$ receive antennas, we derive the achievable ergodic capacity of MMSE detection exactly. When MMSE detection is considered in a receiver, we introduce a different approach that gives the approximation of a MIMO channel capacity at high signal-to-noise ratio (SNR). The difference between the channel capacity and the achievable capacity of MMSE detection converges to some constant that depends only on the number of antennas. We validate the analytical results by comparing them with Monte Carlo simulated results.