• Journal of the Korean Geotechnical Society
• /
• v.33 no.12
• /
• pp.7-20
• /
• 2017

In this study, effects of grain size distribution on the shear strength and rheological properties are investigated for coarse- and fine-grained soils by using direct shear apparatus. Shear strengths are estimated for fine-grained soils with the maximum particle size of 0.075 mm and coarse-grained soils with the maximum particle size of 0.425 mm and fine contents of 17% prepared at dry and liquid limit states. The direct shear tests are conducted under the relatively slow shear velocity, which corresponds to the reactivated landslide or debris flow after collapse according to the landslide classification. In addition, for the evaluation of rheological properties, residual shear strengths for both fine- and coarsegrained soils prepared under liquid limit states are obtained by multiple reversal shear tests under three shear velocities. From the relationship between residual shear strengths and shear rates, Bingham plastic viscosity and yield stress are estimated. The direct shear tests show that cohesions of fine-grained soil are greater than those of coarse-grained soil at both dry and liquid limit states. However, internal friction angles of fine-grained soil are smaller than those of coarse-grained soil. In case of rheological parameters, the plastic viscosity and yield stress of fine-grained soils are greater than those of coarse-grained soils. This study may be effectively used for the prediction of the reactivated landslide or debris flow after collapse.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.3
• /
• pp.27-36
• /
• 2008

This paper presents a comprehensive laboratory study that examines the effects of porosity, water content, density and grain size distribution on the thermal conductivity of soils which were sampled from 16 synoptic stations of Korea. The experimental results clearly demonstrate that porosity and water content are important parameters which strongly affect the thermal conductivity of soils. Soils with lower porosities and higher water contents have higher thermal conductivities. On the contrary, increase of the matrix density slightly increases the thermal conductivity, and grain size distribution hardly affects the thermal conductivity. Dry soils with the same porosity tend to have more scattered values of thermal conductivity than wet soils. Based on the experimental results, a multiple linear regression model and a nonlinear regression model, having two regression variables of porosity and water content, were presented to predict thermal conductivity. Both models show a high accuracy of prediction with $R^2$ values of 0.74 and 0.82, respectively. Thus, it is expected that the suggested empirical models can be used for predicting thermal conductivity of soils by measuring porosity and water content.

• Tunnel and Underground Space
• /
• v.33 no.3
• /
• pp.189-207
• /
• 2023

In the present study, the thermoshearing experiment on a rough rock fracture were modeled using a three-dimensional grain-based distinct element model (GBDEM). The experiment was conducted by the Korea Institute of Construction Technology to investigate the progressive shear failure of fracture under the influence of thermal stress in a critical stress state. The numerical model employs an assembly of multiple polyhedral grains and their interfaces to represent the rock sample, and calculates the coupled thermo-mechanical behavior of the grains (blocks) and the interfaces (contacts) using 3DEC, a DEM code. The primary focus was on simulating the temperature evolution, generation of thermal stress, and shear and normal displacements of the fracture. Two fracture models, namely the mated fracture model and the unmated fracture model, were constructed based on the degree of surface matedness, and their respective behaviors were compared and analyzed. By leveraging the advantage of the DEM, the contact area between the fracture surfaces was continuously monitored during the simulation, enabling an examination of its influence on shear behavior. The numerical results demonstrated distinct differences depending on the degree of the surface matedness at the initial stage. In the mated fracture model, where the surfaces were in almost full contact, the characteristic stages of peak stress and residual stress commonly observed in shear behavior of natural rock joints were reasonably replicated, despite exhibiting discrepancies with the experimental results. The analysis of contact area variation over time confirmed that our numerical model effectively simulated the abrupt normal dilation and shear slip, stress softening phenomenon, and transition to the residual state that occur during the peak stress stage. The unmated fracture model, which closely resembled the experimental specimen, showed qualitative agreement with the experimental observations, including heat transfer characteristics, the progressive shear failure process induced by heating, and the increase in thermal stress. However, there were some mismatches between the numerical and experimental results regarding the onset of fracture slip and the magnitudes of fracture stress and displacement. This research was conducted as part of DECOVALEX-2023 Task G, and we expect the numerical model to be enhanced through continued collaboration with other research teams and validated in further studies.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.321-321
• /
• 2022

Wheat was brought to solve food scarcity with aid from the United States caused by the Korean War. The Korean government launched a campaign to encourage mixed rice and wheat meals due to shortage of rice production in the 1960s, Wheat consumption began in earnest. However, it is difficult to rebuild the domestic wheat production base devastated by the Korean War with the technology at the time. Thus, wheat was mainly consumed from imported in the past. Since then, as wheat consumption has increased due to westernization and diversification of dietary life, wheat became the second staple grain in Korea. In this situation, the government enacted the Wheat Industry Promotion Act to create a basis for sustainable production and consumption of wheat in Korea. This study sought to improve the self-sufficiency of domestic wheat by examining the possibility of using "Ariheuk", a variety of new Korean wheat, as a rice supplement in the same context as the govemment's policy. Wheat has been used as a raw material for the processed food, such as noodles and bread. However, we approached it by using whole wheat as a nutritional grain. Participants were recruited from the agri-food consumer panel conducted by Rural Development Administration. We set a final sample of 525 consumer panels based on the age of census household heads. The experiment was conducted in such a way that participants cooked and ate 100% rice meal and rice containing 20% whole wheat meal. Participants completed the sensory evaluation questionnaire with online. For this experiment, all participants were given same whole wheat product. The sensory evaluation questionnaire consisted of color, glossiness, stickiness, aroma, chewing, sweetness, nuttiness, chewiness, softness, bursting, flavor, texture and swallowability. The sensory evaluation results were analyzed by giving -3 points to +3 points. The former points were given to the response that 100% rice meal is very superior to the response that rice containing 20% whole wheat meal. The latter points were given vice versa. Zero point was given to the response that they are similar each other. As a result, rice with 20% whole wheat meal was better than 100% rice meal in terms of color, aroma, chewiness, bursting and flavor. In case of sweetness and glossiness, there didn't exist significantly different. On the other hands, 100% rice meal was better in terms of softness and swallowability. As a result of ANOVA by age groups, from 30s or younger to 60s or more, there was significant difference among the groups in terms of color, chewiness and bursting. As a result of post-hoc analysis with Duncan's multiple range test (p < 0.05), 50s were evaluated to be significantly superior in color, chewiness and bursting compared to other age groups. In conclusion, it is appropriate to use whole wheat as a supplement to rice in order to improve the self-sufficiency of domestic wheat. As a strategy to promote domestic wheat consumption, in case of Ariheuk, it is necessary to provide an experience through whole wheat tasting and to establish a marketing strategy segmented by age groups.

• Korean Journal of Agricultural Science
• /
• v.3 no.1
• /
• pp.39-51
• /
• 1976

As an accempt to increase thc efficiency of land use and the food production to achieve the national goal in the food self-sufficiency, nine cropping systems on the upper-land were examined in pure-stand and in mixtures of soybean, corn, potato and radish. The important conclusions of this study were summarized as follows; 1. The flowering date of soybean was two or three days earlier in pure-stand than in the mixture with corn. The maturing date two days earlier in the pure-stand than in the mixture with corn. The flowering and maturing dates were not different among various cropping systems in corn. 2. The stem length of soybean was significantly different among various cropping systems. Soybean in pure-stand was shorter in stem length than with corn. 3. The number of pods per soybean plant did not give any significant differences among various cultivation methods. 4. The length of internode and the number of nodes per soybean plant in the mixture with corn were greater than in the pure-stand. In the number of branches per plant this was reversed. 5. The average stem dry weight of soybean per 10a was not significantly different among various cultivation methods. 6. The soybean yield per 10a in the pure-stand was obviously greater than the mixture and there were significant differences among cultivation method within the mixture with corn in soybean yield. 7. The 1,000-grain weight of soybean was significantly different and those in the pure-stand was heavier than those in the mixture with corn. 8. Grain weight per soybean plant and the stem diameter in the pure-stand were significantly lesser than those in the mixture with corn. 9. In the comparisons of corn in the pure-stand and in the mixture with soybean, plant height, number of ear per 10a, mean ear weight and remember of grain per plant, 100-grain weight, ear length, ear girth and number of ear pel plant were not significantly different among various cultivation methods except for the grain yield per 10a. 10. In the economic analysis, the mixture with soybean and corn gave the greatest gross income. The combination 7 was the best which was 47.6% increase income comparing with the soybean pure-stand. 11. As it can be assumed, soybean plant was influenced greatly than corn by various cropping system. It is necessary to study more complex cropping system finding and giving more desirable multiple cropping system for the farmer.

• Journal of the Korean Ceramic Society
• /
• v.46 no.1
• /
• pp.74-80
• /
• 2009

Electrospinning process is the useful and unique method to produce nanofibers from metal precursor and polymer solution by controlled viscosity. In this study, the NiZn ferrite nanofibers were prepared by electrospinning with a aqueous metal salts/polymer solution that contained polyvinyl pyrrolidone and Fe (III) chloride, Ni (II) acetate tetrahydrate and zinc acetate dihydrate in N,N-dimethylformamide. The applied electric field and spurting rate for spinning conditions were 10 kV, 2 ml/h, respectively. The obtained fibers were treated at $250^{\circ}C$ for 1 h to remove the polymer. Finally, the NiZn ferrite fibers were calcined at $600^{\circ}C$ for 3 h and annealed at $900{\sim}1200^{\circ}C$ in air. By tuning the viscosity of batch solution before electrospinning, we were able to control the microstructure of NiZn ferrite fiber in the range of $150{\sim}500\;nm$ at 770 cP. The primary particle size in $600^{\circ}C$ calcined ferrite fiber was about 10 nm. The properties of those NiZn ferrite fibers were determined from X-ray diffraction analysis, electron microscopy, energy dispersive spectroscopy, Fourier transform infrared spectroscopy, thermal analysis, and magnetic measurement.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.1
• /
• pp.97-107
• /
• 2013

The aim of this study was to establish relationships between chemical and physical parameters of wheat with performance and digestibilities of feed components in broiler chickens fed on wheat-based diets. Ninety-four wheat samples were selected for inclusion in four bird trials. Birds were housed in individual wire metabolism cages from 7 to 28 d and offered water and feed ad libitum. Dry matter intake (DMI), liveweight gain (LWG) and gain:feed were measured weekly. A balance collection was carried out from 14 to 21 d for determination of apparent metabolizable energy (AME), ME:gain, dry matter retention, oil and neutral detergent fibre (NDF) digestibility. At 28 d the birds were humanely killed, the contents of the jejunum removed for determination of in vivo viscosity and the contents of the ileum removed for determination of ileal dry matter, starch and protein digestibility. When wheat parameters were correlated with bird performance data, it was found that specific weight was not significantly (p>0.05) related to bird performance. Bird DMI, LWG and gain:feed were best correlated (p<0.05) with the rate of starch digestion, although the coefficients of correlation (r) were still low (0.246 to 0.523). A negative relationship (p<0.01) between AME and total (r = -0.432) and soluble (r = -0.304) non starch polysaccharide (NSP) was observed in this study. Thousand grain weight (TG) was positively correlated with DMI (r = 0.299), LWG (r = 0.343) and gain:feed (r = 0.371). When establishing multiple regression relationships, correlation coefficients greater than 0.8 were achieved for DMI, LWG, gain:feed and ileal crude protein digestibility. However, the economics involved in determining the parameters involved in the regressions make the process impractical.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.4111-4111
• /
• 2001

When a drug is prepared in a tablet, the active component represents only a small portion of the dosage form. The other components of the formulation include materials to assist in the dissolution, antioxidants, coloring agents and bulk fillers. The tablets are tested using approved testing methods usually involving separation and subsequent quantification of the active component. Tablets may also be tested by near-Infrared Reflectance spectrometry (NIRS). In the present study, based on NIRS and multivariate calibration methods, a novel and precise method is developed for direct determination of ascorbic acid in vitamin C tablet. Two different tablet formulations were powdered in three different sizes, 63-125 ${\mu}{\textrm}{m}$, and examined. Spectral region of 4750-4950 $cm^{-1}$ / was used and optimized for quantitative operations. Partial least squares (PLS) and multiple linear regression (MLR) methods were performed for this spectral region. The results of optimized PLS and MLR methods showed that reproducibility increase with decreasing grain size and standard error of calibration (SEP) of less than 1% w/w of ascorbic acid and a correlation coefficient of 0.998 can be achieved. The PLS method showed better results than MLR. Seven overdose and underdose samples (prepared in the laboratory to match marketed products) were tested by proposed and iodometric standard methods. A correlation between NIRS predicted ascorbic acid values and iodomet.ic values was calculated ($R^2$=0.9950). Finally, the direct analysis of individual intact tablets in their unit-dose packages (Blistering in aluminum and PVC foils) obtained from market were also carried out and a correlation coefficient of 0.9989 and SEP of 0.931% w/w of ascorbic acid were achieved.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.4
• /
• pp.27-36
• /
• 2007

In this study, we investigated the interfacial reactions between various Sn-Ag-Cu(SAC) solder alloys and ENIG(Electroless Ni Immersion Gold) and Cu-OSP(Organic Solderability Preservative) pad finish. In the case of the interfacial reaction between Sb added SAC solder and ENlf thinner P-rich Ni layer was formed at the interface. In the case of the interfacial reaction between Ni added SAC solder and Cu-OSP, the uniform $Cu_6Sn_5$, intermetallic compounds(IMCs) were formed and $Cu_6Sn_5$ grain did not grow after multiple reflows. Thinner $Cu_3Sn$ IMCs were farmed at the interface between $Cu_6Sn_5$ and Cu-OSP after $150^{\circ}C$ thermal aging.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.5
• /
• pp.481-487
• /
• 1995

A survey of physical inputs was conducted on the total population of dairy farms supplying milk to the Rewa cooperative dairy company in Fiji. The critical inputs associated with total farm milk production were determined using multiple regression, with analyses being conducted for each of the three identified supplier groups, bulk milk, canned milk and cream. Mean annual milk production per cow averaged 1460 (s.d. = 319), 889 (s.d. = 321) and 800 (s.d. = 451) litres for the bulk milk, canned milk and cream suppliers respectively. Stocking rate averaged 1.37 (s.d. = 1.18) cows per hectare over all farms. Inputs to pasture were universally low and Navua sedge (Cyperus aromaticus) was identified as a major weed. The average amount of supplement fed annually on a grain equivalent basis was 700 (s.d. = 984) kg per cow for bulk milk, 84 (s.d. = 198) kg per cow for canned milk and 146 (s.d. = 542) kg per cow for cream suppliers. The analysis of data from a small group of farms using nitrogen fertiliser indicated that their production levels were higher than the general population. This suggests that there is potential for the Fijian dairy industry to increase milk production through the use of higher inputs to cows and pastures. The regression models relating annual milk production from farms to the two key inputs of number of cows milked and the amount of supplement fed were all significant (p < 0.001). The coefficients of determination for these models ranged from 56.9 to 89.4 percent.