• ETRI Journal
• /
• v.39 no.2
• /
• pp.234-244
• /
• 2017

Research interest in three-dimensional multiple-input multiple-output (3D-MIMO) beamforming has rapidly increased on account of its potential to support high data rates through an array of strategies, including sector or user-specific elevation beamforming and cell-splitting. To evaluate the full performance benefits of 3D and full-dimensional (FD) MIMO beamforming, the 3D character of the real MIMO channel must be modeled with consideration of both the azimuth and elevation domain. Most existing works on the 2D spatial channel model (2D-SCM) assume a wide range for the distribution of elevation angles of departure (eAoDs), which is not practical according to field measurements. In this paper, an optimal FD-MIMO planar array configuration is presented for different practical channel conditions by restricting the eAoDs to a finite range. Using a dynamic network level simulator that employs a complete 3D SCM, we analyze the relationship between the angular spread and sum throughput. In addition, we present an analysis on the optimal antenna configurations for the channels under consideration.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.10
• /
• pp.4759-4780
• /
• 2017

Full Dimension multiple input multiple output (FD-MIMO) architecture employs a planar array design at the Base Station (BS) to provide high order multi-user MIMO (MU-MIMO) via simultaneous data transmission to large number of users. With FD-MIMO, the BS can also adjust the beam direction in both elevation and azimuth direction to concentrate the energy on the user of interests while minimizing the interference leakage to co-scheduled users in the same cell or users in the neighboring cells. In a typical highly populated macrocell environment, modelling the elevation angular characteristics of three-dimensional (3D) channel is critical to understanding the performance limits of the FD-MIMO system. In this paper, we study the throughput performance of FD-MIMO system with varying elevation angular spread and inter-element spacing using a 3D spatial channel model. Our results show that for a typical urban scenario, horizontal beamforming with correlated antenna spacing achieves optimal performance but by restricting the spread of elevation angles of departure, elevation beamforming achieves high array gain with wide inter-element spacing. We also realize significant gains due to spatial array processing via modelling the elevation domain and varying the inter-element spacing for both the transmitter and receiver.

• Journal of Korean Society on Water Environment
• /
• v.23 no.3
• /
• pp.385-390
• /
• 2007

Reliable flow measurement for dry season is very important to set up the in-stream flow exactly and total maximum daily load control program in the basin. Especially, in the points which tidal current effects are dominant because reliability of the low measurement decrease. The reliable measuring methods are needed. In this study, we analysis the water surface elevation difference of water surface elevation. Quantity relationship to consider tidal currents in these regions. It is known that tidal current effects from Nakdong river barrage are dominant in Samrangjin measuring station. We developed multiple regression equation with water surface elevation, quantity, and difference of water surface elevation and compared these results water measured rating curve. All of these regression equation including linear regression equation and log regression equation fits better measured data them existing water surface elevation quantity line and Among three equations, the log regression equation is best to represent the measured the rating curve in Samrangjin point. The log regression equation is useful method to obtain the quantity in the regions which tidal currents are dominant.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.4
• /
• pp.45-61
• /
• 1988

The purpose of this study is to develop regression equations between annual specific sedi- ment of reservoirs and physiographic factors of watersheds. 122 irrigation reservoirs, which have irrigation areas equal to or larger than 200 ha, located in Korea except Cheju province are used in the analysis. Simple regression analyses between the specific annual sediment and each of the physical characteristic factors of the reservoirs are carried out at first. Then, multiple regression analyses between the annual specific sediment and the physical characteristic factors with high correlation coefficients in the simple regression analyses are made. The results obtained from this study are as follows : 1. The results of the sirnple regression analyses show that in each province the watershed area, the length of mainstream, the circumferential length of watershed have high cor- relation coefficients (R=0.814-0.986), and that drainage density, reservoir capacity per watershed area, drainage frequency, basin relief have low correlation coefficients (R=0. 387-0.955). 2. The purposed multiple regression equations between the annual specific sediment of reservoirs and three major characteritic factors of watersheds, namely, the watershed area, the circumferential length of watershed, and the length of mainstream, are proposed as given in Table 2. 3. The result of the simple regression analyses with respect to the reservoir elevation except Jeonnam province, which has very different characteristics comparing to other provinces, shows that watershed area, main stream length and circumferential length have high correlation coefficients (R=0.806-0.884) in low-elevation reservoirs and intermediate- elevation reservoirs, but low correlation coefficients (R=0.639-0.739) in high-elevation reservoirs. 4. With respect to the reservoir elevation, the proposed multiple regression equations bet- ween the annual specific sediment of reservoirs and the three major characteristic factors of watershed which have high correlation coefficients are proposed as given in Table 5.

• Journal of Ecology and Environment
• /
• v.38 no.4
• /
• pp.451-459
• /
• 2015

We investigated the pattern of floral diversity including naturalized plant species and three ecological factors (area, elevation and distance from mainland) of plant species on 53 uninhabited islands in Gyungsangnam-do, southeastern South Korea. A total of 206 taxa in 67 families were observed, and the species of Compositae was most common. Thirteen taxa in eight families of the naturalized plants were observed on 33 islands. The numbers of total plant species, area and elevation were significantly correlated, but no relationship with distance from the mainland was observed. In addition, no relationship was found among the numbers of naturalized plants, area and elevation. However, the average rate of naturalization on islands with different elevations differed significantly, indicating the smallest proportion of naturalized plant species was on high islands. Multiple regression of total species richness identified elevation as a significant factor, while no significant variables were correlated with naturalized plant species. Nonmetric multidimensional scaling (NMS) ordination identified three major variables, distance from mainland, number of naturalized plant species and elevation. These findings indicate that the geography of islands such as area and elevation affected the species richness of plants on uninhabited islands, while human disturbance had a greater effect than geography on the species richness of naturalized plants on islands in southeastern South Korea.

• Journal of Advanced Navigation Technology
• /
• v.28 no.2
• /
• pp.172-177
• /
• 2024

This paper presents a method to overcome the problem of increasing elevation estimation error when estimating elevation in a multipath situation with radar. A multipath situation means that radar reception signals reflected from the same target come from multiple paths. In non-multipath, the monopulse method is accurate. For the opposite case, the least square error method is accurate. In multipath situation and when the elevation angle is very low, a singular occurs where the least square error estimate diverges. This singular was identified based on the propagation factor, and monopulse and least square error estimation methods were selectively used. As a result, we succeeded in increasing the accuracy of elevation estimation. MATLAB simulations were performed to verify the method proposed in this paper.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.6
• /
• pp.120-128
• /
• 2017

The aim of this study is to analyze the accuracy of SRTM Ver 3.0 and ASTER GDEM Ver 2 over Korea. To enable this, accuracy analysis was performed by using precise DEM which was made with multiple aerial image matching and national base map benchmark. The result of this study identified both SRTM and ASTER have different features. The height of the SRTM was found to be higher (3.8 m on average) at lower elevation and lower (8.4 m on average) at higher elevation. In contrast, the ASTER was found to be lower than the actual height at both lower and higher elevation (2.92 m, 4.51 m on average). The cause of this height bias according to the elevation is due to the differences in data acquisition and processing methods of DEM. It was identified however that both SRTM and ASTER were within allowable limits of error. In addition, RMSE of the SRTM was smaller than the ASTER in comparison to benchmark, and also the bias trend both at higher and lower terrain were similar to the precise DEM which was made with multiple aerial image matching. Therefore, the reliability of SRTM can be considered to be higher.

• Archives of Plastic Surgery
• /
• v.45 no.4
• /
• pp.314-318
• /
• 2018

Perforator flaps become a reliable option for coverage of various defects and the interest is change from survival of perforator flaps to make thin flaps for better aesthetic and functional outcomes. Multiple flap thinning methods have been demonstrated but it has not been widely attempted because of concerns about compromising circulation of flap thinning. This article will demonstrate the feasibility and benefits of flap thinning technique: defatting after conventional flap elevation.

• Journal of Korea Water Resources Association
• /
• v.53 no.6
• /
• pp.417-425
• /
• 2020

In order to predict and prevent hydrological disasters such as flood, it is necessary to accurately estimate rainfall. In this paper, an areal average rainfall estimation method using multiple elevation observation data of an electromagnetic wave rain gauge is presented. The small electromagnetic rain gauge system is a very small precipitation radar that operates at K-band with dual-polarization technology for very short distance observation. The areal average rainfall estimation method is based on the assumption that the variation in rainfall over the observation range is small because the observation distance and time are very short. The proposed method has been evaluated by comparing with ground instruments such as tipping-bucket rain gauges and a Parsivel. The evaluation results show that the methodology works fairly well for the rainfall events which are shown here.

• Journal of Korean Society for Geospatial Information Science
• /
• v.3 no.1 s.5
• /
• pp.55-66
• /
• 1995

Most studies using satellite images have been performed to determine three dimensional positioning by stereoscopic analysis for stereo-pair or to extract digital elevation model by stereo matching using image correlation techniques. Because the small errors on the ground control points have a great impact on the results, however, it is hard to get reliable products when we analyze satellite orbital parameters or acquire digital elevation model by using only stereo-pair. Also, if there are noises, shadows, or clouds on the one of stereo pair, it is difficult to produce DEM(digital elevation model) on the area under analysis or to have good accuracy. In these case, it can be solved by systematic analysis of the multiple stereo images. This paper suggests the improvements on the accuracy of the digital elevation model by the developments of stereoscopic analysis techniques for the triplet of SPOT satellite images on the same area.