• 항공우주시스템공학회지
• /
• 제1권3호
• /
• pp.37-42
• /
• 2007

The flight safety system for the satellite launch vehicles is required in order to minimize the risk due to launch vehicle failure. For prompt and reliable decision of flight termination, the flight safety system usually uses multiple sensors to estimate launch vehicle's flight trajectory. In that case, multiple types of observed tracking data makes it difficult to identify the flight termination condition. Therefore, a fusion tracking filter handling the multiple tracking data is necessary for the flight safety system. This research developed a simulation software for generating multiple types of launch vehicle tracking data, and then processed the data with fusion filters.

• 통합자연과학논문집
• /
• 제4권3호
• /
• pp.192-196
• /
• 2011

New method to encode multiple photonic features of Bragg type reflector on silicon wafer has been investigated. Multiple bit encodes of distributed Bragg reflector features have been prepared by electrochemical etching of crystalline silicon by using various square wave current densities. Optical characterization of multi-encoding of distributed Bragg reflectors on porous silicon was achieved by Ocean optics 2000 spectrometer for the search of possible applications of multiple bit encoding of distributed Bragg reflectors such as multiplexed assays and chemical sensors. The morphology and cross-sectional structure of multi-encoded distributed Bragg reflectors was investigated by field emission scanning electron micrograph.

• International Journal of Advanced Culture Technology
• /
• 제5권2호
• /
• pp.98-105
• /
• 2017

Smartphones are fast growing in the IT market and are the most influential devices in our daily life. Smartphones are being studied for their use in body sensor networks with excellent processing power and wireless communication technology. In this paper, we propose a coordinator design that provides data collection, classification, and display using based on Android-smartphone in multiple sensor nodes. The coordinator collects data of sensor nodes that measure biological patterns using wireless communication technologies such as Bluetooth and NFC. The coordinator constructs a network using a multiple-level scheduling algorithm for efficient data collection at multiple sensor nodes. Also, to support different protocols between heterogeneous sensors, a data sheet recording wireless communication protocol information is used. The designed coordinator used Arduino to test the performance of multiple sensor node environments.

• 제어로봇시스템학회논문지
• /
• 제8권6호
• /
• pp.506-513
• /
• 2002

Distributed control systems(DCS) using fieldbus such as CAN have been applied to process systems but it is very difficult to design the DCS while guaranteeing the given end-to-end constraints such as precedence constraints, time constraints, and periods and priorities of tasks and messages. This paper presents a scheduling method to guarantee the given end-to-end constraints. The presented scheduling method is the integrated one considering both tasks executed in each node and messages transmitted via the network and is designed to be applied to a general DCS that has multiple loops with several types of constraints, where each loop consists of sensor nodes with multiple sensors, actuator nodes with multiple actuators and controller nodes with multiple tasks. An assignment method of the optimal period of each loop and a heuristic assignment rule of each message's priority are proposed and the integrated scheduling method is developed based on them.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.311-314
• /
• 2003

In recent years, distributed control systems(DCS) using fieldbus such as CAN have been applied to process systems but it is very difficult to design the DCS while guaranteeing the given end-to-end constraints such as precedence constraints, time constraints, and periods and priorities of tasks and messages. This paper presents a scheduling method to guarantee the given end-to-end constraints considering aperiodic, periodic and non-real-time message and task simultaneously. The presented scheduling method is the integrated one considering both tasks executed in each node and messages transmitted via the network and is designed to be applied to a general DCS that has multiple loops with several types of constraints, where each loop consists of sensor nodes with multiple sensors, actuator nodes with multiple actuators and controller nodes with multiple tasks.

• 조명전기설비학회논문지
• /
• 제28권12호
• /
• pp.84-89
• /
• 2014

This paper proposes the new multiple signal processing monitoring sensor for the marine installation. The recent marine technology is focused on underwater sensors and underwater sensor networks in order to measure, monitor, surveillance of and control of underwater environments. For these marine applications to be available, however, the provision of precise location information using monitoring sensor is essential. In this paper, the multiple signal processing circuit for obtaining the precise location information of marine installation sensor is developed and analyzed. The performance characteristics for obtaining the location information of marine installation sensor is analyzed. The theoretical and experimental studies have been carried out. The presented results from the above investigation show considerably excellent performance for the monitoring for the marine installation.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.1051-1059
• /
• 2014

In this paper, we propose an intelligent situation recognition model by collecting and analyzing multiple sensor signals. Multiple sensor signals are collected for fixed time window. A training set of collected sensor data for each situation is provided to K2-learning algorithm to generate Bayesian networks representing causal relationship between sensors for the situation. Statistical characteristics of sensor values and topological characteristics of generated graphs are learned for each situation. A neural network is designed to classify the current situation based on the extracted features from collected multiple sensor values. The proposed method is implemented and tested with UCI machine learning repository data.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1991년도 광학 및 양자전자학 워크샵
• /
• pp.103-108
• /
• 1991

결정형 光 전압/전류 센서에 있어서 내부다중반사(Multiple internal Reflection), 북굴절 및 물성의 온도의존성이 어떻게 불안정성 요인으로 작용할 수 있는지를 알아보았으며, 이들 요인들을 피해서 센서의 안정성을 높힐 수 있는 방법들을 소개하였다. 구성된 光 전압/전류센서의 간단한 동작도 보았다.

• Smart Structures and Systems
• /
• 제16권4호
• /
• pp.579-591
• /
• 2015

This paper investigates a magnetoelectric (ME) vibration energy harvester that can scavenge energy in arbitrary directions in a plane as well as wide working bandwidth. In this harvester, a circular cross-section cantilever rod is adopted to extract the external vibration energy due to the capability of it's free end oscillating in arbitrary in-plane directions. And permanent magnets are fixed to the free end of the cantilever rod, causing it to experience a non-linear force as it moves with respect to stationary ME transducers and magnets. The magnetically coupled cantilever rod exhibits a nonlinear and two-mode motion, and responds to vibration over a much broader frequency range than a standard cantilever. The effects of the magnetic field distribution and the magnetic force on the harvester's voltage response are investigated with the aim to obtain the optimal vibration energy harvesting performances. A prototype harvester was fabricated and experimentally tested, and the experimental results verified that the harvester can extract energy from arbitrary in-plane directions, and had maximum bandwidth of 5.5 Hz, and output power of 0.13 mW at an acceleration of 0.6 g (with $g=9.8ms^{-2}$).

• 한국방사선학회논문지
• /
• 제15권4호
• /
• pp.525-531
• /
• 2021

양전자방출단층촬영기기의 검출기는 다수의 섬광 픽셀과 다수의 광센서를 사용하여 구성된다. 다수의 광센서를 사용함으로써 비용이 증가하고 신호처리가 복잡해진다. 본 연구에서는 적은 수의 광센서를 사용하여 비용의 감소와 간결한 신호처리가 가능한 검출기를 설계하였다. 섬광 픽셀과 적은 수의 광센서를 사용하고 모든 광센서에 빛을 전달하기 위해 광가이드를 사용하였다. 섬광 픽셀과 광가이드에는 광센서로 최대한의 빛을 전달하기 위해 반사체를 적용하였다. 반사체는 난반사체 및 거울반사체를 사용하였으며, 광가이드의 두께를 다르게 적용하여 평면 영상을 획득하였다. 획득된 평면 영상의 비교 분석을 통해 최적의 조합을 선택하였다. 그 결과 섬광 픽셀과 광가이드 모두 거울반사체를 사용하였을 경우, 모든 두께의 광가이드에서 우수한 평면 영상을 획득하였다. 광가이드는 섬광 픽셀의 영상이 형성된 지점의 분석 및 영상의 크기를 고려하여 3 mm 두께를 사용할 경우 최적의 영상이 획득되는 결과를 도출하였다.