• International Journal of Control, Automation, and Systems
• /
• 제3권1호
• /
• pp.1-14
• /
• 2005

This paper presents an obstacle detection algorithm based on the consecutive and the cooperative range sensor scanning schemes. For a known environment, a mobile robot scans the surroundings using a range sensor that can rotate 3600°. The environment is rebuilt using nodes of two adjacent walls. The robot configuration is then estimated and an obstacle is detected by comparing characteristic points of the sensor readings. In order to extract edges from noisy and inaccurate sensor readings, a filtering algorithm is developed. For multiple robot localization, a cooperative scanning method with sensor range limit is developed. Both are verified with simulation and experiments.

• International Journal of Control, Automation, and Systems
• /
• 제2권3호
• /
• pp.298-309
• /
• 2004

In this paper, a new evolutionary scheme to design a TSK fuzzy model from relevant data is proposed. The identification of the antecedent rule parameters is performed via the evolutionary algorithm with the unique fitness function and the various evolutionary operators, while the identification of the consequent parameters is done using the least square method. The occurrence of the multiple overlapping membership functions, which is a typical feature of unconstrained optimization, is resolved with the help of the proposed fitness function. The proposed algorithm can generate a fuzzy model with transparent membership functions. Through simulations on various problems, the proposed algorithm found a TSK fuzzy model with better accuracy than those found in previous works with transparent partition of input space.

• International Journal of Control, Automation, and Systems
• /
• 제4권3호
• /
• pp.333-343
• /
• 2006

In this paper, the baseline-length information is directly modeled as a measurement for the Wald test, which speeds up the resolution convergence of the integer ambiguity of GPS carrier phase measurements. The convergent speed improvement is demonstrated using numerical simulation and real experiments. It is also shown that the integer ambiguities can be resolved using only four actual satellite measurements with very reasonable convergence speed, if the baseline-length information is used just like one additional observable satellite measurement. Finally, it is shown that the improvement of convergence speed of the Wald test is due to the increase of the probability ratio with the use of the baseline-length constraint.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.81-84
• /
• 1998

For ANC systems applied to aircrafts or passenger ships, engines from which reference signals are usually measured are located so far from seats where main part of controllers are placed. It can make feedforward ANC scheme difficult to implement or very costly. Feedback ANC algorithms which do not require reference signals and use error signals alone to update the filter, are usually sensitive to measurement noise ' and impulse noise. In this paper, reference signal needed for the feedforward control is not measured directly but generated with the estimated frequencies. Cascade adaptive notch filter (ANF), which has the low computational burden, is used to implement ANC system in real time. Several ANFs of order 2 are connected in series to estimate multiple sinusoids. Computer simulations and experiments in the laboratory for verifying efficacy of the proposed algorithm are carried out.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.66.2-66
• /
• 2001

Double-effect absorption chiller-heaters have been widely installed in large buildings and are also becoming popular in mid-sized commercial buildings. While much emphasis is Put on designing energy saving and efficient chiller-heaters, careful attention must also be given to the design of control systems for these devices. Currently, these devices are controlled by their own built-in controllers, such as relay based sequence controller or microprocessor based controller. But, because large buildings require multiple chiller-heaters, a centralized supervision and control system is necessary for the efficient monitoring, control, and operations management of these devices We have developed man-machine interface software that allows the implementation of such a system. This system will support increased reliability, more efficient building management operations, and reduced ...

• Asia pacific journal of information systems
• /
• 제33권4호
• /
• pp.957-976
• /
• 2023

ChatGPT has had a significant impact on society, business, and academia by influencing individuals and organizations through knowledge generation and supporting users in locating conversational inquiries and answers. It can transform how people seek answers by combining human-like conversational skills with AI. By eradicating the cumbersome process of selecting from multiple options, users can conduct preliminary research or create optimized solutions. The purpose of this research is to investigate how consumers use ChatGPT and digital transformation, specifically in terms of knowledge development, searching and recommending, and optimizing accessible possibilities. Using many linked theories, we address the potential implications and insights that can be gained from ChatGPT's early stages and its integration with other applications such as robotics, service automation, and the metaverse. Finally, the application of ChatGPT has practical, theoretical, and phenomenological impacts, in addition to improving users' experiences.

• International Journal of Control, Automation, and Systems
• /
• 제3권spc2호
• /
• pp.315-321
• /
• 2005

Interactions among multiple control functions of a UPFC installed in a power system have been observed in power system simulation and been reported in authors' previous publications [1,2]. This paper presents new analytical results about these observed interactions and concludes that they are due to the control conflict between the series and shunt part of the UPFC, which are connected through the internal common capacitor inside the UPFC. Investigation in the paper reveals, for the first time as far as the authors are aware of, that the linkage pattern of UPFC series and shunt part decides whether the control functions implemented by the UPFC series and shunt part conflict each other or not. This linkage pattern of UPFC series and shunt part can be described by the flow of active power through the UPFC at steady-state operation of the power system. Hence in order to predict the possible interactions among multiple control functions of the UPFC, an interaction indicator is proposed in the paper which is the direction and amount of active power flow through the internal link of the UPFC series and shunt part at steady-state operation of the power system. This proposed interaction indicator can be calculated from power system load flow solution without having to run simulation of the power system with UPFC controllers installed. By using the indicator, the interactions among multiple control functions of the UPFC caused by badly set controller's parameters are excluded. Therefore the indicator only identifies the possible existence of inherent control conflict of the UPFC.

• International Journal of Control, Automation, and Systems
• /
• 제5권4호
• /
• pp.444-455
• /
• 2007

An approach to construct multiple interpretable and precise fuzzy systems based on the Pareto Multi-objective Cooperative Coevolutionary Algorithm (PMOCCA) is proposed in this paper. First, a modified fuzzy clustering algorithm is used to construct antecedents of fuzzy system, and consequents are identified separately to reduce computational burden. Then, the PMOCCA and the interpretability-driven simplification techniques are executed to optimize the initial fuzzy system with three objectives: the precision performance, the number of fuzzy rules and the number of fuzzy sets; thus both the precision and the interpretability of the fuzzy systems are improved. In order to select the best individuals from each species, we generalize the NSGA-II algorithm from one species to multi-species, and propose a new non-dominated sorting technique and collaboration mechanism for cooperative coevolutionary algorithm. Finally, the proposed approach is applied to two benchmark problems, and the results show its validity.

• 로봇학회논문지
• /
• 제4권1호
• /
• pp.62-67
• /
• 2009

For diagnoses of digestive organs, capsule endoscopes are widely used and offer valuable information without patient's discomfort. A general capsule endoscope which consists of image sensing module, telemetry module and battery is able to move along gastro-intestinal tracts passively only through peristaltic waves. Thus, it is likely to have some limitations for doctor to acquire images from the desired organs and to diagnose them effectively. As solutions to these problems, a locomotive function of capsule endoscopes has being developed. We have proposed a capsule-type microrobot with synchronized multiple legs. However, the proposed capsular microrobot also has some limitations, such as low speed in advancement, inconvenience to controlling the microrobot, lack of an image module, and deficiency in a steering module. In this paper, we will describe the limitations of the locomotive microrobot and propose solutions to the drawbacks. The solutions are applied to the capsular microrobot and evaluated by in-vitro tests. Based on the experimental results, we conclude that the proposed solutions are effective and appropriate for the locomotive microrobot to explore inside intestinal tracts.

• 제어로봇시스템학회논문지
• /
• 제18권12호
• /
• pp.1106-1114
• /
• 2012

To achieve synchronized motion between a wearable robot and a human user, the redundancy must be resolved in the same manner by both systems. According to the seven DOF (Degrees of Freedom) human arm model composed of the shoulder, elbow, and wrist joints, positioning and orientating the wrist in space is a task requiring only six DOFs. Due to this redundancy, a given task can be completed by multiple arm configurations, and thus there exists no unique mathematical solution to the inverse kinematics. This paper presents analysis on the kinematic and dynamic aspect of the human arm movement and their effect on the redundancy resolution of the human arm based on a seven DOF manipulator model. The redundancy of the arm is expressed mathematically by defining the swivel angle. The final form of swivel angle can be represented as a linear combination of two different swivel angles achieved by optimizing different cost functions based on kinematic and dynamic criteria. The kinematic criterion is to maximize the projection of the longest principal axis of the manipulability ellipsoid for the human arm on the vector connecting the wrist and the virtual target on the head region. The dynamic criterion is to minimize the mechanical work done in the joint space for each two consecutive points along the task space trajectory. As a first step, the redundancy based on the kinematic criterion will be thoroughly studied based on the motion capture data analysis. Experimental results indicate that by using the proposed redundancy resolution criterion in the kinematic level, error between the predicted and the actual swivel angle acquired from the motor control system is less than five degrees.