• Tuberculosis and Respiratory Diseases
• /
• v.56 no.2
• /
• pp.216-220
• /
• 2004

Because a cavitary pulmonary metastasis is rare, it may not be readily identified. However, various types of cancers can metastasize to the lung in the form of cavities. We report a case of a multiple cavitary metastases to the lung from a cholangiocarcinoma in a 60-year-old man. He complained of generalized weakness and a poor oral intake for 2 months. The plain chest radiography and the chest computed tomography showed multiple small thick-walled cavities and nodules the both lungs. A bronchoscopic examination revealed a focal irregularly elevated surface of the mucosa at the orifice of the superior segment of the right lower lobe and the biopsy demonstrated an infiltrative metastatic adenocarcinoma. The abdomen-pelvis computed tomography showed an ill-marginated and irregularly low-dense area in the right lobe of the liver and a diffuse dilatation of the peripheral intrahepatic bile ducts. The esophagogastroscopy and colonoscopy showed no abnormal findings. It was concluded that the cholangiocarcinoma of the liver metastasized to the lung in the form of cavities. Thereafter, the patient underwent six cycles of the systemic chemotherapy with gemcitabine and cisplatin, and the follow-up imaging studies showed a partial response.

• Composites Research
• /
• v.13 no.1
• /
• pp.89-97
• /
• 2000

Fatigue damage detection and vibration sensing for a laminated composites and impact location detection for a steel beam have been carried out using optical fiber sensor. Intensity based optical fiber sensor is constructed by placing two cleaved fiber end in a hollow glass tube, and multiple reflection within the cavity is considered. Fatigue signals are measured by embedded optical fiber, surface mounted optical fiber sensor and strain gage simultaneously. For vibration sensing, optical fiber sensor is mounted on the carbon fiber composite beam and its response to free vibration and forced vibration is investigated. In impact location detection, two optical fiber sensors are used and the information obtained from two sensors is arrival time delay of vibration caused by impact. Impact location can be calculated from this time delay. The obtained results show that the intensity based optical fiber sensor provide reliable data during long-term fatigue loading, unlike strain gage which deteriorate during the early part of the fatigue test. Optical fiber sensor signals coincide with gap sensor in vibration sensing. The precise locations of impact can be detected within 4.1% error limit.

• Journal of Korean Society of Forest Science
• /
• v.68 no.1
• /
• pp.18-31
• /
• 1985

Users' satisfaction and behavior at five mini parks in the central area of Seoul City were investigated under the encironmental design evaluation framework. The major findings are as follows; 1) The major user group is a student group with the ages ranging from 15 to 24. 2) Half of the users spend 20 to 60 minutes in these parks. 3) According to the multiple regression analysis, the variables related to the satisfaction in daytime are noise level, sunshine, plants, crowding, and surface slope, where those in nighttime are quality of surrounding buildings, turf area, lighting, shade, and sculpture or fountain. 4) According to the free response, the basic needs inmini parks are shade for rest and such amenity facilities as bench, trash basket, and drinking fountain. In addition to these basic needs, users prefer such visually pleasing objects as sculpture and fountain.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.2
• /
• pp.319-325
• /
• 2017

In this study, we optimized the coffee extraction conditions for instant coffee production in two stage percolators, which is the most common coffee extractor for instant coffee production. A central composite design was used to build mathematical model equations for response surface methodology (RSM). In these equations, the yield and overall acceptability of the coffee extracts were expressed as second-order functions of three factors, the feed water temperature, draw-off factor (DOF), and extraction time (cycle time). Based on the result of RSM, the optimum conditions were obtained with the use of desirability function approach (DFA) which find the best compromise area among multiple options. The optimum extraction conditions to maximize the yield and overall acceptability over 40% of yield were found with $163^{\circ}C$ of feed water temperature, 4.3 of DOF and 27 minutes of extraction time (cycle time). These results provide a basic data for the coffee extraction conditions for the competitive instant coffee in the industry.

• Korean Security Journal
• /
• no.62
• /
• pp.205-221
• /
• 2020

The purpose of this study was to examine the effects of emotional labor on fatigue in regular private participation of sports workers, and to provide basic data to improve the welfare and working environment of private security guards, the core of private security industry. The survey response of 260 private security guards was used as the final analysis data, and the following conclusions were drawn through statistical tests of factor analysis, t-test, correlation analysis, and multiple regression analysis using the SPSS Windows 18.0 statistical program. First, the private security guards who regularly participate in sports showed lower sub-variability of fatigue, physical, exhaustion, and nervous system fatigue than private security guards who did not participate in sports. Second, it was found that fatigue was lower as the inner variables became higher, and that as the surface behavior became higher, the fatigue factor was lower. In conclusion, regular exercise participation can reduce emotional labor and improve fatigue of civil security personnel.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.4
• /
• pp.129-142
• /
• 2013

Fabrics created unique features through the change in various ways depending on the elements including fabric structure, threads, thickness, weaving, patterns and processing. This study examined the difference between texture and image depending on components of fabrics. In order to understand the trend of components of fabrics, the actual components of fabrics was analyzed by year, using the women's apparel trend books, Nelly Rodi Fabrics and Promostyl Fabrics. This study analyzed Spring/Summer season and Fall/Winter season from 2002 to 2012. Frequency analysis, cross-tabulation analysis, multiple response cross tabulation analysis were implemented using SPSS 18.0. The followings are the analysis results. For fabric composition, Spring/Summer season used cotton fabric the most. Cotton fabric accounted for relatively high usage in 2005, 2007 and 2008. Fall/Winter season used wool the most in 2002, 2003, 2004 and 2005. In case of fiber blend by fabric composition, cotton was blended with other fibers in Spring/Summer season except wool. The fiber blending ratio of wool was the highest in Fall/Winter season. Wool was blended in most fabrics. More than two patterns were mixed for fabric patterns. The fabric patterns were applied the most in 2012. For fabric processing, the fabrics by sensitivity-functional processing were continuously used every year and the surface finish showed relatively high usage in 2002 and 2011. In conclusion, this study will build the systematic data for 11 years including fabric trends in the past. It can improve specialization, systematization and efficiency in fabric planning.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.5
• /
• pp.349-357
• /
• 2015

The piezoelectric paint sensor is a paint type sensor comprising of an epoxy and piezoelectric powder, which is the main component of a piezoelectric material. This sensor can be easily attached to any type of structure as compared to other sensors because it is viable to directly apply it on structures, as in the case with a typical paint. In this study, the capability of piezoelectric paint sensor for impact detection was evaluated. In Particular, the applications of the piezoelectric paint sensor for railroad vehicles were considered. There have been various cases reported about the damages caused by flying gravel to the under-cover of the railroad vehicle during operation. In order to prevent this, real-time monitoring of the large under-cover surface of the railroad vehicle is unavoidable. Under the assumption of vehicle application, sensor sensitivities were measured after multiple and prolonged exposure to thermal cycle environment $-20{\sim}60^{\circ}C$). Sensitivity evaluation of paint sensor under environmental conditions was conducted in an aluminum specimen. In results, despite the small variations in sensitivity, we could confirm the applicability of this paint sensor for impact detection even after a severe environmental exposure test.

• Textile Coloration and Finishing
• /
• v.22 no.3
• /
• pp.282-291
• /
• 2010

Digital textile printing(DTP) is becoming more important because the production trend of textile printing goods is adapting to small-lot multiple items. Recently enhanced use of DTP is closely connected with production of high value-added products in fashion industry, which is also appropriate for quick response system(QRS). Quality of DTP depends on pre-treatment, after-treatment, ink, media, printer, etc. One of these parameters, Selection of good media is very important to obtain high quality of DTP products. Especially, the effects of media on printing quality of DTP according to yarn twist and structure of knitting fabric were examined in this study. Two types of yarn twist of 830 t.p.m and 1630 t.p.m for cotton knit were used and five types of media structures were knitted with single circular knitting machine. First, MIU, MMD, SMD's values are closely related with surface roughness of sample as well as printing quality. The hard twist samples were higher values than normal twist samples in the same media structure. In case of SMD, the values increased from plain to corduroy types. Second, aspect of line sharpness, line area, and line width values of hard twist samples decreased from plain to corduroy than those of normal twist samples. Third, line deviation values of hard twist samples, blurriness of line, also decreased than those of normal twist samples.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.3
• /
• pp.65-77
• /
• 2015

The urban park has important functions as a habitat for wildlife as well as open space of rest and community for people. This study was carried out to find what factors of structure and vegetation of urban parks could affect forest bird species diversity in Cheonan city. The study surveyed bird and vegetation species in 26 urban parks, Cheonan city. A correlation analysis and multiple linear regressions were performed to test whether habitat structure and vegetation were the major correlate with species diversity. The results showed the Dujeong park was the most high bird species diversity (H' = 2.13), and the Dujeong-8 park (H' = 2.02) and the Cheongsa park (H' = 1.73) were considerably higher than the other urban parks. The variables that were strongly correlated with bird species diversity were park area, number of subtree species, canopy of shrub, number of shrub species, shape index, canopy of subtree, canopy of tree, and impervious surface ratio. The regression of bird species diversity against the environmental variables showed that 3 variables of park area, canopy of subtree, and canopy of tree were included in the best model. Model variable selection was broadly similar for the 5 optimal models. It means park area and multi-layer vegetation were the most consistent and significant predictor of bird species diversity, because urban parks were isolated by built-up areas. Especially the subtree coverage that provides shelter and food for forest birds was an important variable. Therefore, to make parks circular-shaped and abundant multi-layer vegetation, which could be a buffer to external disturbances and improve the quality of habitats, may be used to enhance species diversity in creation and management of urban parks.

• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.5
• /
• pp.414-418
• /
• 2008

The role of positron emission tomography (PET) with F-18 fluorodeoxyglucose (F-18 FDG) in the diagnosis of hepatocellulcar carcinoma (HCC) has been limited because of a variable FDG uptake in HCC. However, the usefulness of PET/CT for detecting extrahepatic metastasis and monitoring of the treatment response in HCC has been reported. A 55-year-old man with a hepatitis B surface antigen-positive, was admitted to our hospital due to dyspnea, general weakness and body weight loss for one month. Chest X-ray showed multiple reticulo-nodular densities on both lower lung fields, which implies metastatic lesions. F-18 FDG PET/CT revealed consecutively intense hypermetabolic mass in right hepatic lobe, inferior vena cava and right atrium. We report a case of HCC with IVC and right atrium invasion identified by F-18 FDG PET/CT.