• 한국산학기술학회논문지
• /
• 제1권1호
• /
• pp.83-90
• /
• 2000

의사결정단위의 효율성 평가 도구로 사용되는 DEA 모형은 효율적 프론티어를 구해 의사결정단위를 평가하는 모형이다. 효율적 프론티어상의 참조집합이 무엇이냐에 따라 평가 단위의 효율성과 비효율을 제거하기 위한 대안이 다르게 된다. 다목적 선형계획법에서 프론티어를 구하기 위해 사용되는 참조점 방법은 제약 조건과 목적함수 간의 상충관계를 고려하면서 자유롭게 효율적 프론티어를 찾아 주는 장점이 있다. 또한 그 구조가 DEA모형과는 유사하므로 DEA모형을 참조점 방법의 방식으로 재 표현할 수 있다. 의사결정자가 단지 방사형 투사만에 의한 효율성 분석에 만족하지 못하거나 의사결정자의 선호구조에 의해 곡면상의 다른 점을 가장 선호한다면 이 점을 기준으로 대상을 평가하는 것이 올바른 결과에 도달 할 수 있을 것이다. 따라서 본 연구에서 는 DEA모형을 참조점 방법에 따라 재해석하고 4 개의 의사결정단위로 이루어진 표본을 이용하여 다양한 유형의 DEA모형에 의한 효율성을 평가하고 참조점 방법에 의한 확장된 형태의 효율적 프론티어를 구한다. 이를 통해 참조점 방법이 DEA 모형의 적용과 해석에 있어 많은 도움을 줄 수 있다는 점을 보인다.

• Smart Structures and Systems
• /
• 제3권3호
• /
• pp.373-384
• /
• 2007

For structural health monitoring (SHM) of civil infrastructures, displacement is a good descriptor of the structural behavior under all the potential disturbances. However, it is not easy to measure displacement of civil infrastructures, since the conventional sensors need a reference point, and inaccessibility to the reference point is sometimes caused by the geographic conditions, such as a highway or river under a bridge, which makes installation of measuring devices time-consuming and costly, if not impossible. To resolve this issue, a visionbased real-time displacement measurement system using digital image processing techniques is developed. The effectiveness of the proposed system was verified by comparing the load carrying capacities of a steel-plate girder bridge obtained from the conventional sensor and the present system. Further, to simultaneously measure multiple points, a synchronized vision-based system is developed using master/slave system with wireless data communication. For the purpose of verification, the measured displacement by a synchronized vision-based system was compared with the data measured by conventional contact-type sensors, linear variable differential transformers (LVDT) from a laboratory test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.123-125
• /
• 2010

As the exterior noise emitted by a vehicle is getting more and more attention, simulated pass-by measurements become more important. This well established method provides information about the total noise emitted by the vehicle. For a vehicle manufacturer it is not only interesting to know about the total noise but also to know how this total exterior noise is composed of different contributions, such as for example the contribution of the engine, the intake or exhaust system. Transfer path analysis (TPA) provides a separation of these contributions for each of the pass-by microphones alongside the track. Presented is a method for fast and efficient determination of the contributions of multiple sources using operational transfer path analysis (OTPA). The calculation of the transfer characteristics between the reference measurement points on the vehicle and the corresponding response points of both microphone lines are carried out while operation of the vehicle. As result of the contribution analysis from operational transfer path analysis, the characteristic noise level as function of the covered distance is displayed for all individual sound sources, thus providing in depth information for sound quality engineering.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1999년도 KOBA 방송기술 워크샵 KOBA Broadcasting Technology Workshop
• /
• pp.227-232
• /
• 1999

We have been making researches on 3-D displays using computer-generated holograms(CGHs). Our CGHs are binary Fresnel holograms that reconstruct point light sources and are recorded by using high resolution laser printers (image setters). We use an image setter with a resolution of 5080 dots per inch. It is possible to reconstruct CGHs with light-emitting points. As the resolution of the image setter is not so high, it is better to use a spherical wave as a reference beam. We considered the recordable points objects are restricted by the low resolution, and proposed the multiplex type hologram to reduce the number of point objects recorded in the unit area of the CGH. We proposed a method to make computer-generated color hologram which could reconstruct color point light sources, by combining RGB color filters with the stripe CGHs corresponding to each color. We considered two kinds of gradation method on our binary CGHs. In this paper, we propose a multiple reconstruction method for improving the narrow viewing field.

• Advances in nano research
• /
• 제6권1호
• /
• pp.57-80
• /
• 2018

In this study, the thermal loading effect on free vibration characteristics of carbon nanotubes (CNTs) with multiple cracks is studied. Various boundary conditions for nanotube are taken in to account. In order to take the small scale effect, the nonlocal elasticity of Eringen is employed in the framework of Euler-Bernoulli beam theory. This theory states that the stress at a reference point is a function of strains at all points in the continuum. A cracked nanotube is assumed to be consisted of two segments that are connected by a rotational spring which is located in the position of the cracked section. Hamilton's principle is used to achieve the governing equations. Influences of the nonlocal parameter, crack severity, temperature change and the number of cracks on the system frequencies are investigated. Also, it is found that at room or lower temperature the natural frequency for CNT decreases as the value of temperature change increases, while at temperature higher than room temperature the natural frequency of CNT increases as the value of temperature change increases. Various boundary conditions have been applied to the nanotube.

• Journal of Crop Science and Biotechnology
• /
• 제11권1호
• /
• pp.7-12
• /
• 2008

Quantitative trait loci, a genetic concept for explaining the inheritance of non-Mendelian traits in 1940s, have been realized as particular fragments of chromosome even unique genes in most crops in 21st century. However, only very a small portion of QTL has been screened out by geneticists comparing to a great number of genes underneath the quantitative traits. These identified QTL even have been seldom used into breeding program because crop breeders may not find the QTL in their breeding populations in their field station. Several key points will be proposed to meet the challenges of QTL analysis today: a fine mapping population and the related reference genetic map, QTL evaluation in multiple environments, recognizing real QTL with small genetic effect, map integration.

• 대한전자공학회논문지SP
• /
• 제37권1호
• /
• pp.1-15
• /
• 2000

3차원 형상의 복구를 위하여 일반적으로 다른 방향에서 취득한 거리 영상을 하나의 좌표계로 변환하는 과정이 필요하다. 본 논문에서는 이러한 과정 중 레지스트레이션과 인티그레이션에 관한 연구 결과를 제시한다 레지스트레이션에 대해서는 가존의 ICP 알고리듬의 수렴 속도 향상을 위해 높은 곡률을 갖는 데이터에 가중치를 주는 2 단계의 알고리듬을 제안한다 첫 번째 단계에서는 모든 거리 데이터 이용하여 적당한 정도의 레지스트레이션을 수행하고 두 번째 단계에서 높은 곡률을 가진 점들만을 이용하여 보다 정확한 레지스트레이션을 수행한다 인티그레이션 알고리듬으로는 가준 좌표계로 변환된 모든 거리 영상간의 전체 오차를 최소화하기 위해 2장간의 거리 영상에 대한 ICP 알고리듬을 임의의 N장의 거리 영상에 대하여 적용할 수 있도록 일반화하는 알고리듬을 제안하였다 제안하는 알고리듬을 통하여 2장간의 변환을 순차적으로 수행하여 기준 좌표계로의 변환을 얻었을 때 레지스트레이션 오차가 누적되는 문제점을 해결하였다 실험결과 레지스트레이션 알고리듬은 펜티움 150MHz PC 환경에서 l분정도의 수행시간을 나타내었다 실험 결과는 제안하는 기법이 적절한 시간내에 모든 거리 데이터들을 오차가 고르게 분포하는 모델을 형성할 수 있음을 보인다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권11호
• /
• pp.2657-2675
• /
• 2013

A novel neighbor selection-based fingerprinting algorithm using matrix correlation (MC) for Wi-Fi localization is presented in this paper. Compared with classic fingerprinting algorithms that usually employ a single received signal strength (RSS) sample, the presented algorithm uses multiple on-line RSS samples in the form of a matrix and measures correlations between the on-line RSS matrix and RSS matrices in the radio-map. The algorithm makes efficient use of on-line RSS information and considers RSS variations of reference points (RPs) for localization, so it offers more accurate localization results than classic neighbor selection-based algorithms. Based on the MC algorithm, an error estimation method using artificial neural network is also presented to fuse available information that includes RSS samples and localization results computed by the MC algorithm and model the nonlinear relationship between the available information and localization errors. In the on-line phase, localization errors are estimated and then used to correct the localization results to reduce negative influences caused by a static radio-map and RP distribution. Experimental results demonstrate that the MC algorithm outperforms the other neighbor selection-based algorithms and the error estimation method can reduce the mean of localization errors by nearly half.

• 방송공학회논문지
• /
• 제7권4호
• /
• pp.317-326
• /
• 2002

기존 비디오 압축 기술에 비해 높은 부호화 효율 덴 추가적으로 오류내성, 네트워크 친화성 등의 특성을 지닌 H.264 표준안 부호화 기술 가운데, 복수개 참조 영상을 이용하여 다양한 블록 크기로 움직임 보상하는 기법은 높은 부호화 효율을 갖게 하는 주 요인임과 동시에 높은 복잡도를 갖게 하는 원인으로 작용한다. 이러한 움직임 보상의 복잡도를 줄이기 위해 본 논문에서는 다양한 블록 크기에 대한 선택적 움직임 추정 알고리즘을 제안하고자 한다. 제안된 기법에서는 먼저 다이아몬드 탐색 기법을 이용해 초기 위치 지점에 대해 SAD(Sum of Absolute Difference)를 구하고 이를 기반으로 움직임 추정을 추가적으로 수행할 것인가를 각 블록 크기 단위로 결정하게 된다. 실험 결과, 움직임 탐색 영역을 $\pm$32로 하였을 경우 제안 기법은 기존의 전역 탐색(Full Search)에 비해 약 5배 정도 속도 향상을 보였다.

• Smart Structures and Systems
• /
• 제24권5호
• /
• pp.587-595
• /
• 2019

Deformation measurement of large scale structures, such as the ground beds of high-rise buildings, tunnels, bridge, and railways, are important for insuring service quality and safety. The pose-relay videometrics method and displacement-relay videometrics method have already presented to measure the pose of non-intervisible objects and vertical subsidence of unstable areas, respectively. Both methods combine the cameras and cooperative markers to form the camera series networks. Based on these two networks, we propose two novel videometrics methods with closed-loop camera series network for deformation measurement of large scale structures. The closed-loop camera series network offers "closed-loop constraints" for the camera series network: the deformation of the reference points observed by different measurement stations is identical. The closed-loop constraints improve the measurement accuracy using camera series network. Furthermore, multiple closed-loops and the flexible combination of camera series network are introduced to facilitate more complex deformation measurement tasks. Simulated results show that the closed-loop constraints can enhance the measurement accuracy of camera series network effectively.