• Journal of Welding and Joining
• /
• 제17권4호
• /
• pp.85-92
• /
• 1999

In GMAW, the spatter is generated because of the variation of the arc state. If the arc state is quantitatively assessed, the control method to make the spatter be reduced is able to develop. This study was attempted to develop the optimal model that could estimate the arc state quantitatively. To do this, the generated spatters was captured under the limited welding conditions, and the waveforms of the arc voltage and of the welding current were collected. From the collected waveforms, the waveform factors and their standard deviations were produced, and the linear and non-linear regression models constituted using the factors and their standard deviations are proposed to estimate the arc state. the performance test to the proposed models was practiced. Obtained results are as follow. From the results of correlation analysis between the factors and the amount of the generated spatters, the standard deviations of the waveform factors have more the multiple regression coefficients than the waveform factors. Because the correlation coefficient between T and {TEX}$T_{a}${/TEX}, and s[T] and s[{TEX}$T_{a}${/TEX}] was nearly one, it was found that these factors have the same effect to the spatter generation. In the regression models to estimate the arc state, it was fond that the linear and the non linear models were also consisted of similar factors. In addition, the linear regression model was assessed the optimal model for estimating the arc state because the variance of data was narrow and multiple regression coefficient was highest among the models. But in the welding conditions which the amount of the generated spatters were small, it was found that the non linear regression model had better the estimation performance for the spatter generation than the linear.

• 산업경영시스템학회지
• /
• 제43권2호
• /
• pp.137-145
• /
• 2020

Various elements of Fabrication (FAB), mass production of existing products, new product development and process improvement evaluation might increase the complexity of production process when products are produced at the same time. As a result, complex production operation makes it difficult to predict production capacity of facilities. In this environment, production forecasting is the basic information used for production plan, preventive maintenance, yield management, and new product development. In this paper, we tried to develop a multiple linear regression analysis model in order to improve the existing production capacity forecasting method, which is to estimate production capacity by using a simple trend analysis during short time periods. Specifically, we defined overall equipment effectiveness of facility as a performance measure to represent production capacity. Then, we considered the production capacities of interrelated facilities in the FAB production process during past several weeks as independent regression variables in order to reflect the impact of facility maintenance cycles and production sequences. By applying variable selection methods and selecting only some significant variables, we developed a multiple linear regression forecasting model. Through a numerical experiment, we showed the superiority of the proposed method by obtaining the mean residual error of 3.98%, and improving the previous one by 7.9%.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2000년도 춘계 학술대회 및 국제 감성공학 심포지움 논문집 Proceeding of the 2000 Spring Conference of KOSES and International Sensibility Ergonomics Symposium
• /
• pp.240-243
• /
• 2000

An apparel products retrieval system was proposed in which users can refer to products using Kansei evaluation values. The system adopts relevance feedback using history of the retrieval to learn the tendency of user evaluation. The system is based on a vector space retrieval model using products images expression as semantic scales. The system makes a query from user inputting information and retrieves closest products from the database. Revising algorithms of the difference method. linear multiple regression performed to investigate the effectiveness and criteria of the search. As a result of evaluation of the accuracy, it was found that the linear multiple regression and the neural network models are effective for the retrieval considering the individual Kansei.

• Computers and Concrete
• /
• 제12권2호
• /
• pp.151-167
• /
• 2013

Prediction of concrete properties is an important issue for structural engineers and different methods are developed for this purpose. Most of these methods are based on experimental data and use measured data for parameter estimation. Three typical methods of output estimation are Categorized Linear Regression (CLR), Multiple Linear Regression (MLR) and Artificial Neural Networks (ANN). In this paper a statistical cleansing method based on CLR is introduced. Afterwards, MLR and ANN approaches are also employed to predict the compressive strength of structural lightweight aggregate concrete. The valid input domain is briefly discussed. Finally the results of three prediction methods are compared to determine the most efficient method. The results indicate that despite higher accuracy of ANN, there are some limitations for the method. These limitations include high sensitivity of method to its valid input domain and selection criteria for determining the most efficient network.

• 한국농공학회지
• /
• 제43권4호
• /
• pp.97-105
• /
• 2001

The ultrasonic pulse velocity test has a strong potential to be developed into a very useful and relatively inexpensive in-place test for assuring the quality of concrete placed in structure. The main problem in realizing this potential is that the relationship between compressive strength ad ultrasonic pulse velocity is uncertain and concrete is an inherently variable material. The objective of this study is to improve the reliability of in-place concrete strength predictions by ultrasonic pulse velocity method. Experimental cement content, s/a rate, and curing condition of concrete. Accuracy of the prediction expressed in empirical formula are examined by multiple regression analysis and linear regression analysis and practical equation for estimation the concrete strength are proposed. Multiple regression model uses water-cement ratio cement content s/a rate, and pulse velocity as dependent variables and the compressive strength as an independent variable. Also linear regression model is used to only pulse velocity as dependent variables. Comparing the results of the analysis the proposed equation expressed highest reliability than other previous proposed equations.

• 대한원격탐사학회지
• /
• 제35권4호
• /
• pp.503-516
• /
• 2019

We have estimated the vertical column density (VCD) of formaldehyde (HCHO) on a global scale using a multiple linear regression method (MRM) with Ozone Monitoring Instrument (OMI) and Moderate-Resolution Imaging Spectroradiometer (MODIS) data. HCHO VCDs were estimated in regions of biogenic, pyrogenic, and anthropogenic emissions using independent variables, including $NO_2$ VCD, land surface temperature (LST), an enhanced vegetation index (EVI), and the mean fire radiative power (MFRP), which are strongly correlated with HCHO. To evaluate the HCHO estimates obtained using the MRM, we compared estimates of HCHO VCD data measured by OMI ($HCHO_{OMI}$) with those estimated by multiple linear regression equations (MRE) ($HCHO_{MRE}$). Good MRM performances were found, having the average statistical values (R = 0.91, slope = 1.03, mean bias = $-0.12{\times}10^{15}molecules\;cm^{-2}$, percent difference = 11.27%) between $HCHO_{MRE}$ and $HCHO_{OMI}$ in our study regions where high HCHO levels are present. Our results demonstrate that the MRM can be a useful tool for estimating atmospheric HCHO levels.

• 한국가스학회지
• /
• 제11권3호
• /
• pp.13-18
• /
• 2007

다변량 통계 분석법(Multivariate statistical analysis method)의 대표적 방법인 다중 선형 회귀법(Multiple linear regression. MLR)을 이용하여 2성분계 혼합물의 인화점을 회귀 분석하고 예측하였다. 가연성 물질의 인화점에 대한 예측은 실제 화학 공정 설계에서 화재 및 폭발 위험성을 판단하는 중요한 부분 중의 하나이다. 본 연구에서는 순수 성분의 물성 자료만을 이용하여 2성분계 혼합물의 인화점 실험 자료에 대해 다중 선형 회귀법(MLR)을 수행하였고, 이를 이용하여 새로운 혼합물에 대한 인화점을 예측하였다. 2성분계 혼합물의 인화점에 대한 MLR의 회귀 성능과 새로운 혼합물에 대한 예측 성능을 알아보기 위해, 기존의 인화점 추정 방법인 Raoult의 법칙과 Van Laar식에 의한 추정값과 비교해 보았다.

• Communications for Statistical Applications and Methods
• /
• 제10권1호
• /
• pp.31-38
• /
• 2003

A simple method is proposed to detect the number of change points and test the location and size of multiple change points with jump discontinuities in an otherwise smooth regression model. The proposed estimators are based on a local linear regression fit by the comparison of left and right one-side kernel smoother. Our proposed methodology is explained and applied to real data and simulated data.

• Journal of the Korean Statistical Society
• /
• 제16권2호
• /
• pp.55-70
• /
• 1987

The principal components regression is one of the substitues for least squares method when there exists multicollinearity in the multiple linear regression model. It is observed graphically that the performance of the principal components regression is strongly dependent upon the values of the parameters. Accordingly, a new deletion criterion which determines proper principal components to be deleted from the analysis is developed and its usefulness is checked by simulations.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2005년도 추계 학술발표회 논문집
• /
• pp.13-17
• /
• 2005

In recent years, many people use R as a statistics system. R is frequently updated by many R project teams. We are interested in the method of multiple outlier detection and know that R is not supplied the method of multiple outlier detection. In this talk, we review these procedures for detecting multiple outliers and provide more efficient procedures combined with direct methods and indirect methods using R.