• Journal of Welding and Joining
• /
• v.35 no.3
• /
• pp.68-74
• /
• 2017

Characteristics of dissimilar metal welds between alloy steel ASTM A387 Gr. 91 and carbon steel ASTM A516 Gr.70 made with Flux cored arc welding(FCAW) have been evaluated in terms of microstructure, mechanical strength, chemical analysis by EDS as well as corrosion test. Three heat inputs of 15.0, 22.5, 30.0kJ/cm were employed to make joints of dissimilar metals with E71T-1C wire. Post-weld heat treatment was carried out at $750^{\circ}C$ for 2.5 h. Based on microstructural examination, Intragranular polygonal ferrite and grainboundary ferrite were formed only in first layer of weld metal. Another layers consisted of acicular ferrite and $Widmannst{\ddot{a}}tten$ ferrite. The amount of acicular ferrite was increased with decreasing heat input and layer. Heat affected zone of alloy steel showed the highest hardness due to the formation of tempered martensite and lower bainite. Lower and upper bainite were formed in heat affected zone of carbon steel. Tensile strengths of dissimilar metal welds decreased with increasing heat inputs. Dissimilar metal welds showed a good hot cracking resistance due to the low HCS index below 4. The salt spray test of dissimilar metals welds showed that the weight loss rate by corrosion below 170 hours was decreased with increasing heat inputs due to the increase of the amount of acicular ferrite.

• The Journal of the Korean bone and joint tumor society
• /
• v.16 no.2
• /
• pp.95-98
• /
• 2010

Synovial chondromatosis is a benign nodular cartilaginous proliferation arising in the synovium of joints. The radiolographic features of this condition are variable. Rarely, it would be confused with malignancy such as chondrosarcoma, osteosarcoma or synovial sarcoma. We report a case of primary synovial chondromatosis of the posterior aspect of the proximal tibia mimicking a parosteal osteoarcoma on the radiography, which showed a homogeneously radiopaque juxtacortical mass. However, subsequent computed tomography (CT) showed multiple intra-articular masses containing chondroid mineralization, suggesting synovial chondromatosis.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.1
• /
• pp.7-11
• /
• 2009

In this study, solder joints were made with Sn-3.5Ag (wt%) solder ball. Electroless nickel / immersion gold (ENIG) printed circuit board (PCB) substrates were employed in this work. The mechanical and electrical properties were measured as a function of the number of reflow. Die shear strength was measured with increasing reflow number. Until the forth or fifth reflow, shear force increased and after the fifth reflow the shear force of die decreased. The electrical resistivity of solder joint linearly increased with increasing reflow number.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.3
• /
• pp.183-188
• /
• 2021

Objective: The purpose of this study was to develop a stretchable joint motion sensor that is based on silver nano-particle. Through this sensor, it can be utilized as an equipment for rehabilitation and analyze joint movement. Method: In this study, precursor solution was created, after that, nozel printer (Musashi, Image master 350PC) was used to print on a circuit board. Sourcemeter (Keithley, Keithley-2450) was used in order to evaluate changes of electric resistance as the sensor stretches. In addition, the sensor was attached on center of a knee joint to 2 male adults, and performed knee flexion-extension in order to evaluate accurate analysis; 3 infrared cameras (100 Hz, Motion Master 100, Visol Inc., Korea) were also used to analyze three dimensional movement. Descriptive statistics were suggested for comparing each accuracy of measurement variables of joint motions with the sensor and 3D motions. Results: The change of electric resistance of the sensor indicated multiple of 30 times from initial value in 50% of elongation and the value of electric resistance were distinctively classified by following 10%, 20%, 30%, 40% of elongation respectively. Through using the sensor and 3D camera to analyze movement variable, it showed a resistance of 99% in a knee joint extension, whereas, it indicated about 80% in flexion phase. Conclusion: In this research, the stretchable joint motion sensor was created based on silver nanoparticle that has high conductivity. If the sensor stretches, the distance between nanoparticles recede which lead gradual disconnection of an electric circuit and to have increment of electric resistance. Through evaluating angle of knee joints with observation of sensor's electric resistance, it showed similar a result and propensity from 3D motion analysis. However, unstable electric resistance of the stretchable sensor was observed when it stretches to maximum length, or went through numerous joint movements. Therefore, the sensor need complement that requires stability when it comes to measuring motions in any condition.

• The Korea Journal of Herbology
• /
• v.29 no.4
• /
• pp.35-44
• /
• 2014

Objectives : Evodia rutaecarpa (Juss.) Benth.(ER) and Chaenomeles sinensis Koehne (CS) have multiple applications and were known to have anti-inflammatory effects. In the current study, we investigated to clearly understand the mechanism of therapeutic role for CS, ER and their combination in CIA model mice. Methods : DBA/1OlaHsd mice were immunized with bovine type II collagen. After a second collagen immunization, mice were treated with CS, ER and their combination once a day for 7 weeks. Cytokine production and gene expression were assessed during CIA (collagen-induced arthritis) model mice in knee joint, lymph node (LN) using ELISA and FACS analysis. The severity of arthritis within the knee joints was evaluated by histological assessment of cartilage destruction and pannus formation. Result : Oral administration of CS, ER and their combination (150 mg/kg) significantly suppressed the progression of CIA, and significantly suppressed the progression of CIA and inhibited the production of TNF-${\alpha}$ and IL-6 in serum. The erosion of cartilage was dramatically reduced in mouse knees after treatment with CS plus ER. Conclusion : These result suggest that CS plus ER significantly suppressed the progression of CIA and that this action was characterized by the decreased production of TNF-${\alpha}$, IL-6 and collagen II specific antibody in serum.

• Investigative Magnetic Resonance Imaging
• /
• v.25 no.4
• /
• pp.332-337
• /
• 2021

Behçet's disease is a chronic inflammatory disorder involving vessels of various sizes and organs, including the skin, joints, gastrointestinal tract, lungs, and cardiovascular system. The etiology of Behçet's disease is unclear, and clinical diagnosis is important in the absence of definitive laboratory or pathological findings diagnostic of Behçet's disease. Cardiac involvement is rare but might present as endocarditis, myocarditis, pericarditis, or intracardiac thrombosis. This report presents a case of Behçet's disease involving the heart in a 22-year-old man with unusual manifestations of right ventricular fibrosis and intracardiac thrombosis. Cardiac magnetic resonance imaging revealed multiple intracardiac thrombi and delayed diffuse subendocardial enhancement involving the right ventricle. No peripheral eosinophilia was detected. Endomyocardial biopsy showed mixed inflammatory cell infiltrates. Based on the patient's clinical history of oral ulcer and arthritis, a diagnosis of Behçet's disease was made considering the clinical, radiological, and histological findings. Intracardiac thrombi and endomyocardial fibrosis are rare manifestations of Behçet's disease, and the diagnosis is often a clinical challenge. Early diagnosis is important for appropriate management. Behçet's disease should be considered in the differential diagnosis of patients with intracardiac thrombosis and endomyocardial fibrosis of the right chamber.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.328-335
• /
• 2022

With the advance of robot capabilities and functionalities, construction robots assisting construction workers have been increasingly deployed on construction sites to improve safety, efficiency and productivity. For close-proximity human-robot collaboration in construction sites, robots need to be aware of the context, especially construction worker's behavior, in real-time to avoid collision with workers. To recognize human behavior, most previous studies obtained 3D human poses using a single camera or an RGB-depth (RGB-D) camera. However, single-camera detection has limitations such as occlusions, detection failure, and sensor malfunction, and an RGB-D camera may suffer from interference from lighting conditions and surface material. To address these issues, this study proposes a novel method of 3D human pose estimation by extracting 2D location of each joint from multiple images captured at the same time from different viewpoints, fusing each joint's 2D locations, and estimating the 3D joint location. For higher accuracy, the probabilistic representation is used to extract the 2D location of the joints, considering each joint location extracted from images as a noisy partial observation. Then, this study estimates the 3D human pose by fusing the probabilistic 2D joint locations to maximize the likelihood. The proposed method was evaluated in both simulation and laboratory settings, and the results demonstrated the accuracy of estimation and the feasibility in practice. This study contributes to ensuring human safety in close-proximity human-robot collaboration by providing a novel method of 3D human pose estimation.

• Archives of Plastic Surgery
• /
• v.50 no.6
• /
• pp.621-626
• /
• 2023

In the first half of the third century B.C., Herophilus and Erasistratus performed the first systematic dissection of the human body. For subsequent centuries, these cadaveric dissections were key to the advancement of anatomical knowledge and surgical techniques. To this day, despite various instructional methods, cadaver dissection remained the best way for surgical training. To improve the quality of education and research through cadaveric dissection, our institution has developed a unique method of perforator-preserving cadaver injection, allowing us to achieve high-fidelity perforator visualization for dissection studies, at low cost and high efficacy. Ten full body cadavers were sectioned through the base of neck, bilateral shoulder, and hip joints. The key was to dissect multiple perfusing arteries and draining veins for each section, to increase "capture" of vascular territories. The vessels were carefully flushed, insufflated, and then filled with latex dye. Our injection dye comprised of liquid latex, formalin, and acrylic paint in the ratio of 1:2:1. Different endpoints were used to assess adequacy of injection, such as reconstitution of eyeball volume, skin turgor, visible dye in subcutaneous veins, and seepage of dye through stab incisions in digital pulps. Dissections demonstrated the effectiveness of the dye, outlining even the small osseous perforators of the medial femoral condyle flap and subconjunctival plexuses. Our technique emphasized atraumatic preparation, recreation of luminal space through insufflation, and finally careful injection of latex dye with adequate curing. This has allowed high-fidelity perforator visualization for dissection studies.

• Imaging Science in Dentistry
• /
• v.54 no.1
• /
• pp.71-80
• /
• 2024

Purpose: This study aimed to evaluate age-stratified radiographic features in temporomandibular joint osteoarthritis using cone-beam computed tomography. Materials and Methods: In total, 210 joints from 183 patients(144 females, 39 males, ranging from 12 to 88 years old with a mean age of 44.75±19.97 years) diagnosed with temporomandibular joint osteoarthritis were stratified by age. Mandibular condyle position and bony changes (flattening, erosion, osteophytes, subchondral sclerosis, and subchondral pseudocysts in both the condyle and articular eminence, thickening of the glenoid fossa, joint space narrowing, and joint loose bodies) were evaluated through cone-beam computed tomography. After adjusting for sex, the association between age groups and radiographic findings was analyzed using both a multiple regression model and a multinomial logistic regression model(α=0.05). Results: The prevalence of joint space narrowing and protruded condyle position in the glenoid fossa significantly increased with age (P<0.05). The risks of bony changes, including osteophytes and subchondral pseudocysts in the condyle; flattening, erosion, osteophyte, and subchondral sclerosis in the articular eminence; joint loose bodies; and thickening of the glenoid fossa, also significantly rose with increasing age (P<0.05). The number of radiographic findings increased with age; in particular, the increase was more pronounced in the temporal bone than in the mandibular condyle (P<0.05). Conclusion: Increasing age was associated with a higher frequency and greater diversity of bony changes in the temporal bone, as well as a protruded condyle position in the glenoid fossa, resulting in noticeable joint space narrowing in temporomandibular joint osteoarthritis.

• Hip & pelvis
• /
• v.35 no.4
• /
• pp.259-267
• /
• 2023

Purpose: Nondisplaced femoral neck fractures have traditionally been treated with in situ fixation. However, poor surgical and clinical outcomes have been reported for fractures with valgus deformity >15°, and the reduction of valgus impaction has recently been emphasized. In addition, early degenerative osteoarthritis can be caused by cam-type femoroacetabular impingement after healing of femoral neck fractures. This study was designed with the objective of confirming the difference in progression of radiographic osteoarthritis according to the severity of the valgus deformity. Materials and Methods: Patients who underwent internal fixation using multiple cannulateld screws for management of nondisplaced femoral neck fractures were divided into two groups: high valgus group (postoperative valgus angle ≥15°) and low valgus group (postoperative valgus angle <15°). Evaluation of demographic data and changes in the joint space width from the immediate postoperative period to the latest follow-up was performed. Results: A significant decrease in joint space width in both hip joints was observed in the high valgus group when compared with the low valgus group, including cases with an initial valgus angle less than 15° and those corrected to less than 15° of valgus by reduction. No complications requiring surgical treatment were observed in either group; however, two cases of avascular necrosis, one in each group, which developed in the low valgus group after reduction of the fracture, were followed for observation. Conclusion: Performing in situ fixation in cases involving a valgus deformity ≥15° in non-displaced femoral neck fractures may cause accelerated narrowing of the hip joint space.