• Archives of Plastic Surgery
• /
• v.45 no.4
• /
• pp.314-318
• /
• 2018

Perforator flaps become a reliable option for coverage of various defects and the interest is change from survival of perforator flaps to make thin flaps for better aesthetic and functional outcomes. Multiple flap thinning methods have been demonstrated but it has not been widely attempted because of concerns about compromising circulation of flap thinning. This article will demonstrate the feasibility and benefits of flap thinning technique: defatting after conventional flap elevation.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.11
• /
• pp.508-514
• /
• 2005

In this paper, it was investigated the characteristics of PD(partial discharge) pulse shapes in oil and the possibility of TF(Time-Frequency) analysis for the discrimination of air corona in on-site PD measurement of oil transformers. For the purpose, single and multiple discharges combined with oil discharges and air corona were generated and measured by use of artificial models through the HFPD pulse detector and the oscilloscope. PD pulse shapes were different according to the type of defects, especially including air corona- pulses. Also, through the TF analysis, data clusters could be classified each other in the TF Map, even in the case of multiple discharges. Therefore, it is known that TF analysis could be aprlied for the improvement of on-site PD measurement in oil transformers.

• Journal of Korean Society for Quality Management
• /
• v.33 no.4
• /
• pp.88-95
• /
• 2005

Multistage screening is a common practice when a component has a critical effect on the function of the assembly. A defect in a component might incur malfunction of an electronic device, resulting in a great amount of loss. Multistage screening, including duplicated screening inspections, may provide a good solution for this problem when inspection errors are present. In the company studied here, the manufacturing process of the multiple layer chip capacitor includes two-stage screening. In the first stage, screening inspection is performed repeatedly until no defects are found in the lot. In the second stage, sampling inspection is performed by a group of experts prior to shipment. In this article, we review the procedure used in the field and suggest a revised model of the multiple screening procedure and solution method for this situation. The usefulness of the proposed model is discussed through a practical example.

• Transactions of Materials Processing
• /
• v.9 no.5
• /
• pp.512-525
• /
• 2000

Designers are frequently faced with multiple quality issues in injection molded parts. These issues are usually In conflict with each other, and thus tradeoff needs to be made to reach a final compromised solutions. The objective of this study is to develop an automated injection molding design methodology, whereby part defects such as warpage and weld line are optimized. The features of the proposed methodology are as follows: first, Utility Function approach is applied to transform the original multiple objective problem into single objective problem. Second is an implementation of a direct search-based Injection molding optimization procedure with automated consideration of process variation. The Space Reduction Method based on Taguchi's DOE(Design Of Experiment) is used as a general optimization tool in this study. The computational experimental verification of the methodology was partially carried out for a can model of Cavallero Plastics Incorporation, U. S. A. Applied to production, this study will be of immense value to companies in reducing the product development time and enhancing the product quality.

• Korean Journal of Human Ecology
• /
• v.2 no.2
• /
• pp.49-62
• /
• 1999

The purpose of this study is to evaluate the combination of details on the maternity clothes of one-piece type through visual evaluation which helps compensating pregnant women＇s body defects for their more attractive fashion styles. The data evaluated by a multiple ranking test were analyzed by mean, paired t-test, general linear models procedure and Duncan＇s multiple ranged test. The result are as follows : 1) The pregnant woman wearing the one-piece dress with notched collar, pleats and whole button looks longer in lower part of bodies, smaller in upper body, slimmer, have less appeared bust and abdomen, more balanced as a Whole than when wearing others. And also, it makes a pregnant woman be seen more refined and simple. 2) In case of a pregnant woman, a one-piece dress with notched collar, tuck and whole button makes her look longer in neck, narrower in shoulder, and more active than when wearing others. 3) With roll collar, pleats and whole button, it looks taller and more graceful than when wearing others.

• Journal of the Korean Data and Information Science Society
• /
• v.15 no.4
• /
• pp.867-877
• /
• 2004

The sequential sampling inspection method is an extension of the multiple-sampling methods, and its theory is based on the sequential probability ratio test (SPRT) of Wald. In this paper, the characteristics of SPRT for testing the number of defects are approximated by using the estimated excess over the boundaries. The use of the estimated excess shows good performances in estimating the operating characteristic function and the average sample number of SPRT compared to the method by neglecting the excess. It also makes it possible to determine the boundary values which satisfy the desired error probabilities.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.4
• /
• pp.43-49
• /
• 2004

The production parts have required multiple processes such as drawing, piercing, blanking and notching etc. are performed with a high production rates in progressive die. In order to prevent the defects of process result, the optimization of strip process layout design, die design, die making, and tryout etc. are needed. According to these factors of die development process, it has been required that the theory and practice of metal working process and its phenomena, die structure, machining conditions for die making, die materials, heat treatment of die components, processing know-how and so on. In this study, we designed and analyzed die components through the carrying out of upper relevant matters also simulated the strip process layout of multiple stage drawing by DEFORM. Especially the result of tryout and its analysis became to the feature of this study with a system of PDDC(Progressive Die design by computer).

• BMB Reports
• /
• v.46 no.7
• /
• pp.338-345
• /
• 2013

microRNAs (miRNAs) are small non-coding RNAs that regulate gene expression by targeting the 3'-untranslated region of multiple target genes. Pathogenesis results from defects in several gene sets; therefore, disease progression could be prevented using miRNAs targeting multiple genes. Moreover, recent studies suggest that miRNAs reflect the stage of the specific disease, such as carcinogenesis. Cystic diseases, including polycystic kidney disease, polycystic liver disease, pancreatic cystic disease, and ovarian cystic disease, have common processes of cyst formation in the specific organ. Specifically, epithelial cells initiate abnormal cell proliferation and apoptosis as a result of alterations to key genes. Cysts are caused by fluid accumulation in the lumen. However, the molecular mechanisms underlying cyst formation and progression remain unclear. This review aims to introduce the key miRNAs related to cyst formation, and we suggest that miRNAs could be useful biomarkers and potential therapeutic targets in several cystic diseases.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.341-346
• /
• 2002

The production part requiring multiple processes such as piecing, blanking and notching are performed with a high production rates in progressive die. In order to prevent the defects of process result, the optimum of strip process layout design, die design, die making, and tryout with inspection etc. are needed. According to these factors of die development process, they required theory and practice of metal working process and its background, die structure, machining conditions for die making, die materials, heat treatment of die components, know-how and so on. In this study, we designed and analyzed die components also simulated the strip process layout of multiple stage drawing by DEFORM. Especially the result of tryout and its analysis become to the feature of this study.

• International journal of advanced smart convergence
• /
• v.8 no.3
• /
• pp.39-45
• /
• 2019

This paper presents an optical technique for the three-dimensional (3D) shape inspection of micro solder balls used in ball-grid array (BGA) packaging. The proposed technique uses an optical source composed of spatially arranged light-emitting diodes (LEDs) and the results are derived based on the specular reflection characteristics of the micro solder balls for BGA A vision system comprising a camera and LEDs is designed to capture the reflected images of multiple solder balls arranged arbitrarily on a tray and the locations of the LED point-light-source reflections in each ball are determined via image processing, for shape inspection. The proposed methodology aims to determine the presence of defects in 3D BGA shape using the statistical information of the relative positions of multiple BGA balls, which are included in the image. The presence of the BGA balls with large deviations in relative position imply the inconsistencies in their shape. Experiments were conducted to verify that the proposed method could be applied to inspection without sophisticated mechanism and productivity problem.