• Earthquakes and Structures
• /
• 제17권5호
• /
• pp.463-475
• /
• 2019

In this paper, a procedure to develop fragility curves of structures equipped with semi-active tuned mass dampers (SATMDs) considering multiple failure criteria has been presented while accounting for the uncertainties of the input excitation, structure and control device parameters. In this procedure, Latin hypercube sampling (LHS) method has been employed to generate 30 random SATMD-structure systems and nonlinear incremental dynamic analysis (IDA) has been conducted under 20 earthquakes to determine the structural responses, where failure probabilities in each intensity level have been evaluated using Monte Carlo simulation (MCS) method. For numerical analysis, an eight-story nonlinear shear building frame with bilinear hysteresis material behavior has been used. Fragility curves for the structure equipped with optimal SATMDs have been developed considering single and multiple failure criteria for different performance levels and compared with that of uncontrolled structure as well as structure controlled using passive tuned mass damper (TMD). Numerical analysis has shown the capability of SATMDs in significant enhancement of the seismic fragility of the nonlinear structure. Also, considering multiple failure criteria has led to increasing the fragility of the structure. Moreover, it is observed that the influence of the uncertainty of input excitation with respect to the other uncertainties is considerable.

• 대한건축학회논문집:계획계
• /
• 제34권4호
• /
• pp.27-34
• /
• 2018

Flat or Multiple Dwelling Houses are relatively vulnerable to crime safety. Crime prevention measures are urgently needed because crime is 2.6 times higher than in real apartments. Through the analysis of domestic and foreign crime prevention design standards, field survey, and interviews with experts, 27 items of crime prevention design criteria for flat or multiple dwelling house were derived, and ten design criteria that should be considered first by the expert AHP were derived. As a result of the pilot evaluation of existing flat or multiple dwelling house, the houses completed after 2015 have relatively high level of crime prevention, but the houses constructed before that are very vulnerable. The policy and system improvement plan based on the analysis result is as follows. First, new housing should be promoted to meet minimum criteria by supplying and educating public officials, architects, and building owners in the short term to provide criteria for flat or multiple dwelling house crime prevention plans. Second, existing housing should be supported with basic crime prevention support projects such as security windows for flat or multiple dwelling house where security of residential environment such as urban renewal policy is poor. Third, the Enforcement Decree of the Building Act shall be revised to make the crime prevention environment design of flat or multiple dwelling house obligatory, and the criteria of flat or multiple dwelling house crime prevention plan should be reflected in the notice of crime prevention building standard.

• 한국지리정보학회지
• /
• 제3권3호
• /
• pp.45-53
• /
• 2000

지리정보체계(GIS)에 의한 도면중첩방법은 지도화된 명목척도의 기준들에 대하여 적합한 위치를 찾는 문제에는 이상적인 방법이 될 수 있으나, 다수의 불명확한 기준을 가진 경우에는 많은 문제점을 안고 있다. 반면에, 다요소의사결정(MCE)기법은 다수의 결정요인을 가진 복잡한 위치결정의 문제를 푸는 좋은 방법이다. 이러한 GIS와 MCE의 결합에 의한 접근방법은 다수의 결정요인을 가진 적지분석을 합리적이고 객관적으로 수행하는 도구가 된다. 이러한 방법에 의하여 김해 대청공원 집단시설지구의 위치선정과정을 사례로 소개하였다.

• Korean Journal of Hydrosciences
• /
• 제4권
• /
• pp.65-79
• /
• 1993

Selection of the best operating rule among a set of alternatives for a multipurpose reservoir system operation requires to evaluate many minor criteria in addition to the major objectives assessed to the system. These problems are sufficiently complex and difficult that they are beyond heuristic decision rules and experiences in case several noncommensurable multiple criteria are included in the evaluation. With the assistance of multicriterion decision analysis techniques, it is possible to select the best one among various alternatives by systematically comparing and ranking the alternatives with respect to the criteria of choice. Evaluation criteria for multipurpose reservoir system operating rules were identified and defined, and the multicriterion decision analysis techniques were applied to evaluate the four existing operating rules of the Chungju multipurpose project according to the identified nine multiple criteria. The application results show that the methodology is very efficient to select the best operation alternative among a finite number of operating rules with many evaluation criteria for a large-scale reservoir system operation.

• 대한가정학회지
• /
• 제42권8호
• /
• pp.123-132
• /
• 2004

The purpose of this research was to determine the relation between clothing evaluative criteria and personality types. Primary factor analysis was used to classify the clothing evaluative criteria and the continual scores of Myers Briggs Type Indicator (MBTI) were used for classifying the personality types. Correlation analysis and multiple regression analysis were used to determine the relation between the clothing evaluative criteria and the personality types. The data for this research were collected from questionnaires of 309 female university students in Seoul. In the results, the clothing evaluative criteria were grouped into 4 underlying dimensions： practical, situational, appearance producible and symbolic. Partially significant relations between the 4 clothing evaluative criteria and the 4 indicators of MBTI personality types were found through correlation analysis. Multiple regression analysis revealed that the variables explaining the dimension of Sensing and Intuition (SN) were appearance producible and symbolic clothing evaluative criteria; the appearance producible criterion had an inclination toward Intuition while the symbolic criterion had an inclination toward Sensing. The variable explaining the dimension of Judging and Perceiving (JP) was situational clothing evaluative criterion, which had an inclination toward Judging.

• 품질경영학회지
• /
• 제20권1호
• /
• pp.126-135
• /
• 1992

The decision making process for production planning in FMS usually involves multiple conflicting objectives and criteria. This study consists of prescreening and analytical phase. In the prescreening phase, criteria are used to reduce the set of alternative system configuration down to a small number of candidates. After this phase, a multiobjected programming model is formulated for each remainning configuration.

• Journal of the Korean Data and Information Science Society
• /
• 제25권6호
• /
• pp.1521-1530
• /
• 2014

The ROC analysis is considered for multiple class diagnosis. There exist many criteria to find optimal thresholds and measure the accuracy of diagnostic tests for k dimensional ROC analysis. In this paper, we proposed a diagnostic accuracy measure called the correct classification simple rate, which is defined as the summation of true rates for each classification distribution and expressed as a function of summation of sequential true rates for two consecutive distributions. This measure does not weight accuracy across categories by the category prevalence and is comparable across populations for multiple class diagnosis. It is found that this accuracy measure does not only have a relationship with Kolmogorov - Smirnov statistics, but also can be represented as a linear function of some optimal threshold criteria. With these facts, the suggested measure could be applied to test for comparing multiple distributions.

• Journal of Oral Medicine and Pain
• /
• 제10권1호
• /
• pp.73-89
• /
• 1985

This study comprised 157 extracted teeth, 73 of the teeth originated from mates and 84 from females, the age range was 12-79 years. The correlation coefficient of each Gustafson's criteria in relation to age was carried out. Age estimation were performed on 157 teeth according to the method by Gustafson and by use of multiple regression, as used by Johanson, after evaluating the six criteria of Gustafson by multiple regression computer analysis. Two prediction formulas and standard deviations were compared with each other. The results were as follows : 1. The author found that six Gustafson's criteria had strong correlation with age except root resorption, and correlation coefficients were r = 0.79 (Transparent dentin), r=0.72 (Secondary dentin), r 0.69 (Periodontal change), r=0.63(Attrition), r = 0.39 (Root resorption), respecti vely. 2. The age estimation formula by Gustafson's method was calculated as follows: Y 8.88 + 3.52X r =0.87, r2 = 0.76, SD = 8.18, F = 483.56, P < 0.01 The age estimation formula by multiple regression was calculated as follows: Y 8.57 + 6.37T + 6.37T + 4.63P + 2.70S + 2.40C + 3.08A + 1.34R r= 0.89, r2 = 0.78, SD = 7.82, F = 91.62, P < 0.01, Durbin-Watson Coefficient = 1.09 3. In comparison of two estimation formulas, the formula by multiple regression, the method of Johanson, was found to be slightly more reliable than Gustafson's method. Gustafson's method SD = 8.18, Multiple regression (Johanson's method) SD = 7.82 4. It was reaffirmed that Gustafson's six criteria could be a independent variable in multiple regression analysis.

• 콘크리트학회지
• /
• 제7권5호
• /
• pp.145-154
• /
• 1995

콘크리트는 압축압밀과 인장균열파괴의 두 개의 서로 다른 파괴양상을 타나낸다. 따라서, 다차원의 압밀과 인장균열을 포함하는 콘크리트의 비선형해석을 위하여 두개의 다른 파괴기준을 사용하는 콘크리트 재료모델이 사용되어야 한다. 본 연구에서 사용하는 콘크리트 모델은 소성이론에 기초한 것으로 압축압밀과 인장균열에 대한 다중파괴이론을 사용하고 잇다. 인장균열거동에 대해 두 개의 다른 재료모델이 사용되고 있는데, 이상화된 균열방향에 따라 분류되는 회전균열소성모델과 정지균열소성모델이 사용되고 있다. 본 연구에서는 콘크리트의 비선형거동이 plane stress 문제에 대하여 단순화된다. 이 재료모델은 유한요소해석에 사용되며 그 결과는 몇 개의 철근콘크리트부재 실험과 비교된다. 회전균열소성모델과 정지균열소성모델의 장단점이 비교된다.

• Earthquakes and Structures
• /
• 제8권1호
• /
• pp.77-100
• /
• 2015

Multiple tuned mass dampers (MTMDs) tuned to various frequencies have been shown to efficiently control the seismic response of structures where multiple modes are dominant. One example is irregular structures that are found more vulnerable than their symmetric counterparts. With the technology of MTMDs available, design and optimal design methodologies are required for application. Such a methodology, in the form of an analysis/redesign (A/R) scheme, has been previously presented by the authors while limiting responses of interest to allowable values, i.e., performance-based design (PBD). In this paper, the A/R procedure is modified based on formal optimality criteria, making it more cost efficient, as well as more computationally efficient. It is shown that by using the methodology presented herein, a desired performance level is successfully targeted by adding near-optimal amounts of mass at various locations and tuning the TMDs to dampen several of the structure's frequencies. This is done using analysis tools only.