• 한국자동차공학회논문집
• /
• 제5권4호
• /
• pp.84-92
• /
• 1997

Among the various sources of vehicle interior noise, this paper concerns the road induced noise ; the identification of its transfer path by using experimental method. Multiple input and single output model is taken as a noise generation model. Because it is impossible to measure the road imput forces directly, the acceleration signals are measured on four axle;three directions for each point. By considering the cross correlations of input signals, four uncorrelated source groups are taken. Multiple coherence function is employed to investigate the contribution of each group. In addtion, to identify the detailed path through the suspension systems, the contributions of all possible paths are ranked by using the coherence functions between interior noise and the relative accelerations of connections such as bushings and mountings. Measurements are performed with passenger vehicle traveling on concrete and asphalt roads at 60㎞/h.

• 대한기계학회논문집A
• /
• 제36권11호
• /
• pp.1371-1379
• /
• 2012

본 논문에서는 직접분사 가솔린엔진 부품에 의해서 발생하는 진동에 대한 기여도를 분석하는 방법을 제시한다. 본 연구에서는 부분기여도함수를 적용하여 부품 상호간의 관련성에 대한 진동원을 규명 하는데 사용하였다. 직접분사 가솔린 엔진 부품의 진동원을 규명하는데 부분기여도함수 방법을 사용하기 위해서는 시스템의 모델링이 필요하며 본 연구에서는 진동 발생 경로를 2 입력과 단일 출력계로 시스템을 모델링하였다. 이 모델링을 증명 하기 위해서, 직접분사가솔린 엔진의 진동원인 고압펌프, 연료레일, 인젝터, 고압센서에 3 축 가속도계 센서로 각 부품의 진동을 측정했다. 이 모델링을 바탕으로 각각의 진동원에 대한 부분기여도 함수를 구했으며, 직접분사 부품들의 각각의 진동 기여도를 계산하였다. 부분기여도 함수를 바탕으로 한 모델링을 통해 각 부품들에서 발생되는 진동 출력 기여 값을 정량적으로 도출하였다.

• 한국음향학회지
• /
• 제35권2호
• /
• pp.118-124
• /
• 2016

본 논문은 수중 방사소음 발생 시, 부분상관 함수를 이용한 기여도 분석법에 대하여 연구를 수행하였다. 부분상관 함수를 활용한 기여도 분석을 수행할 시, 입력순서의 선정은 정확한 기여도값 도출에 있어 매우 중요하다. 하지만 주파수 상관성분이 존재하는 시스템에 대하여 기여도분석을 실시할 경우, 적절한 입력순서를 선정하기가 어렵다. 이러한 문제를 해결하기 위하여 본 논문에서는 기여도특성 행렬과 다중상관 함수의 관계를 활용하여 기여도 영역을 나누어 평가하는 기여도 분석 기법을 제시하였다. 제시한 분석법의 검증을 위해 정현파로 구성된 다중입력과 단일 출력을 갖는 시스템을 모델링하였고, 이 시스템에 대하여 기여도 분석을 실시하였다. 그 결과 정확한 기여도값을 도출 할 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.298-303
• /
• 2003

The eccentric rotor system has various problems by vibration of unbalance mass. Specially, it is difficult to analyze vibration problem for the drum washing machine due to correlation of transmission paths. We analyze the mechanical structure by multidimensional spectral density to identify the maximum vibration magnitude at the frequency domain. It estimates the coherence function of the signals to pass the transmission paths. In case of the drum washing machine, because the transmission paths are correlated partially it needs to determinate the priority ranking. And the correlated parts are eliminated using conditioned spectral density function. Finally the shielding effect method confirms the reasonability of the modeling.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.1819-1830
• /
• 1991

본 연구에서는 구조물이 순수한 선형계인 경우에 국한하여 선형 구조물의 여 러지점에서 측정한 신호들을 기존의 방법과 같이 다중입력으로 간주하고 선형 구조물 로부터 방사된 소음, 즉 관측자의 위치에서 측정한 신호를 출력으로 가정한 두 부분 기여도 함수를 적용하여 소음/진동원을 규명하였을 때 발생하는 결과를 이론적으로 해 석하여 보았다.

• 한국소음진동공학회논문집
• /
• 제17권8호
• /
• pp.741-746
• /
• 2007

In this study, transfer path identification and output estimation are simulated by multi-dimension spectral analysis method (MDSA). Multi -input/single-output system give expression the vehicle suspension which each inputs are correlated reciprocally. In case of correlating with inputs, the system needs separating the each input signal by MDSA. Main simulations are about finding effective input by coherent output spectrum and selecting optimal input's number by multiple coherence function. Also, by shielding transfer path of each input, transfer path characteristic is identified in terms of overall integrated contribution level.

• 설비공학논문집
• /
• 제3권2호
• /
• pp.103-113
• /
• 1991

This paper presents a method for estimating the noise source contribution of a pulse combustion burner in a multiple input system where the input sources may be coherent each other. By coherence function method, it is found that the biggest part of the noise source in the pulse combustion burner is generated by the part of the combustion chamber. This analysis is modeled as three input / single output system because the noise generating mechanism of the pulse combustion burner is very complicated. The coherence function method is proved to be useful tool for the identification of noise source. The overall levels of the radiated source pressure by coherence function method are compared with those measured and calculated by the frequency response function approach. The experimental results have shown a good agreement with the results calculated by the coherence function method when the input sources are coherent strongly each other. The estimation of shield effect by FRF method indicates that significant reduction can be achieved in sound radiation if only transmission path generated by the part of combustion chamber is acoustically shield.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.779-784
• /
• 2008

This paper presents a the method for estimating the noise source contribution on the road noise of the vehicle in a multiple input system where the input sources may be coherent with each other. By coherence function method, it is found that the biggest part of the noise source in the road noise is generated by structural vibration on the mechanical-acoustic transfer functions of vehicles. This analysis is modeled as four input/single output system because the noise is generated with four wheels that mechanism of the road noise is very complicated. The coherence function method is proved to be useful tool for identifying of noise source. The overall levels of the interior noise be coherence function method are compared with those measured and calculated by the frequency response function approach using mechanical excitation test. The experimental results have shown a good agreement with the results calculated by the coherence function method when the input sources are coherent strongly each other. The estimation of the road noise indicates that significant coherent can be achieved in the vehicle interior noise.

• 한국소음진동공학회논문집
• /
• 제18권11호
• /
• pp.1206-1212
• /
• 2008

This paper presents a the method for estimating the noise source contribution on the road noise of the vehicle in a multiple input system where the input sources may be coherent with each other. By coherence function method, it is found that the biggest part of the noise source in the road noise is generated by structural vibration on the mechanical-acoustic transfer functions of vehicles. This analysis is modeled as four input/single output system because the noise is generated with four wheels that mechanism of the road noise is very complicated. The coherence function method is proved to be useful tool for identifying of noise source. The overall levels of the interior noise be coherence function method are compared with those measured and calculated by the frequency response function approach using mechanical excitation test. The experimental results have shown a good agreement with the results calculated by the coherence function method when the input sources are coherent strongly each other. The estimation of the road noise indicates that significant coherent can be achieved in the vehicle interior noise.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.143-150
• /
• 2005

To verify applicability of multi-dimensional spectral analysis (MDSA) fur noise source identification two different approaches which are frequency response and coherent function have been investigated. The coherence function approach appears able to separate the correlated system when the noise sources were coherent. In this study, we identify contribution of structure-borne-noise of vehicle HVAC system using MDSA method. Firstly, to identify the applicability of MDSA method, 4-inputs of vehicle HVAC system were the signals measured by accelerometers attached on the selected noise sources which were composed of blower, evaporator, heater and duct. While 1-output which was driver's position sound was the SPL signals measured by a remote microphone, when the blower motor was operating. We identify efficiency of systems modeled with four Inputs/single output through ordinary coherence function (OCF) and partial coherence function (PCF). As a result of experiment, the blower accounted for $62-88\%$ of the overall level of sound energy density. Also, according to the analysis of acoustic signal and vibration signals measurement, an investigation of the noise source identification in the vehicle HVAC is presented. With the sound intensity method, the major sources of the vehicle HVAC radiation are verified. Also the method of improving the noise reduction is proposed by attaching damping patch access to blower motor and noise reduction is verified.