• 제목/요약/키워드: Multiple Band

Search Result 719, Processing Time 0.024 seconds

A Cognitive Beamforming Scheme for Coexistence of Cognitive Radio and Incumbent Radio Systems (인지 라디오와 기존 라디오 시스템의 공존을 위한 인지적인 빔포밍 기법)

  • Kim, Jae-Woon;Kim, Hyun-Wook;Hong, Min-Ki;Shin, Yo-An
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.45 no.3
    • /
    • pp.27-33
    • /
    • 2008
  • In this paper, we propose a cognitive beamforming scheme for coexistence of CR (Cognitive Radio) and IR (Incumbent Radio) systems. In order to maintain the priority of the IR in spectrum utilization the proposed cognitive beamforming scheme needs to have the CR not cause any interference to the IR systems occupying the same frequency band at the same time. In addition the proposed scheme has to provide maximum channel gain to the CRU (CR User) in a boundary of satisfying the former criterion. For this purpose, the proposed scheme does not cause any interference to the IRU (IR User), while the CRU is served without additional radio resource consumption. From simulation, we confirmed that when using the proposed scheme the CRU does not interfere with the IRU and there is little bit error rate performance degradation of the CRU as compared to that of the ideal beamforming system, which does not consider the IR priority.

Estimation of ambient PM10 and PM2.5 concentrations in Seoul, South Korea, using empirical models based on MODIS and Landsat 8 OLI imagery

  • Lee, Peter Sang-Hoon;Park, Jincheol;Seo, Jung-young
    • Korean Journal of Agricultural Science
    • /
    • v.47 no.1
    • /
    • pp.59-66
    • /
    • 2020
  • Particulate matter (PM) is regarded as a major threat to public health and safety in urban areas. Despite a variety of efforts to systemically monitor the distribution of PM, the limited amount of sampling sites may not provide sufficient coverage over the areas where the monitoring stations are not located in close proximity. This study examined the capacity of using remotely sensed data to estimate the PM10 and PM2.5 concentrations in Seoul, South Korea. Multiple linear regression models were developed using the multispectral band data from the Moderate-resolution imaging spectro-radiometer equipped on Terra (MODIS) and Operational Land Imager equipped on Landsat 8 (Landsat 8) and meteorological parameters. Compared to MODIS-derived models (r2 = 0.25 for PM10, r2 = 0.30 for PM2.5), the Landsat 8-derived models showed improved model reliabilities (r2 = 0.17 to 0.57 for PM10, r2 = 0.47 to 0.71 for PM2.5). Landsat 8 model-derived PM concentration and ground-truth PM measurements were cross-validated to each other to examine the capability of the models for estimating the PM concentration. The modeled PM concentrations showed a stronger correlation to PM10 (r = 0.41 to 0.75) than to PM2.5 (r = 0.14 to 0.82). Overall, the results indicate that Landsat 8-derived models were more suitable in estimating the PM concentrations. Despite the day-to-day fluctuation in the model reliability, several models showed strong correspondences of the modeled PM concentrations to the PM measurements.

Ultrastructural Characteristics of Necrosis and Stunt Disease in Red Pepper by the Mixed Infections of Tobacco mosaic virus-U1 or Pepper mild mottle virus and Pepper mottle virus

  • Kim, Dae-Hyun;Cho, Jeom-Deog;Kim, Jae-Hyun;Kim, Jenog-Soo;Cho, Eui-Kyoo
    • The Plant Pathology Journal
    • /
    • v.21 no.3
    • /
    • pp.252-257
    • /
    • 2005
  • In single infection of Tobacco mosaic virus-U1 (TMV­U1) or Pepper mild mottle virus (PMMoV), mosaic symptoms were produced on the chili pepper cultivars of 'Cheongyang' and 'Wangshilgun'. However, in cultivars of 'Manitta' and 'Bugang', no symptoms were occurred. In single infection of Pepper mottle virus (PepMoV), symptoms of mottle and malformation were produced on the tested cultivars of 'Manitta', 'Bugang', 'Cheongyang', and 'Wangshilgun'. In the cultivars of 'Cheongyang' and 'Wangshilgun', synergistic symptoms of stunt and lethal death were induced by mixed infections in the two combinations of TMV-U1 + PepMoV and PMMoV+PepMoV. However, in cultivars of 'Manitta' and 'Bugang', synergistic symptoms were not noted, but mottling which was milder than that of single infection was produced. Cells infected singly with TMV-U1 and PMMoV in the cultivars of 'Cheongyang' and 'Wangshilgun', respectively, had the typical ultra-structures of tobamovirus as the stacked-band structure and multiple spiral aggregate (SA). In the cells and tissues infected with PepMoV on the cultivars of 'Cheongyang', 'Wangshilgun', 'Manitta' and 'Bugang', the potyvirus inclusions of pinwheels, scrolls, lamminated aggregates and amorphous inclusion were observed. In the cells infected mixedly with combinations of TMV­U1+PepMoV and PMMoV+PepMoV, the virus particles and inclusions of the two different viruses were found simultaneously in the same cytoplasm. The amounts of virus particles in mixed infections were more abundant than in single infection. The angled-layer aggregates (ALA) were observed only in the cells infected with both TMV-U1 and PepMoV.

Fiber-Optic Current Transformer for the Over Current Protection Relay (과전류 보호계전기용 광섬유 전류센서)

  • Song, Min-Ho;Yang, Chang-Soon;Ahn, Seong-Joon;Park, Byoung-Seok;Lee, Byoung-Ho
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.21 no.5
    • /
    • pp.542-548
    • /
    • 2001
  • A robust, accurate, broad-band, alternating current sensor using fiber-optics is being developed as a part of optical over current protection relay system. The sensor uses the Faraday effect in optical fiber and polarimetric measurements tc sense electrical current. The current sensing coil consists of a length of twisted optical fiber and Faraday rotator mirror to suppress the linear birefringence effect. Due to its single-ended closed path structure, it can not only be easily installed to the target with great isolation from other fields in the vicinity, but the sensitivity can be increased by using multiple turns. This paper reports on the theoretical backgrounds of the sensor design and the preliminary experimental results.

  • PDF

PCR-RFLP patterns of three kinds of Metagonimus in Korea (국내에 존재하는 세 종류 메타고니무스속 흡충의 RCR-RFLP반응양상)

  • 유재란;정진성
    • Parasites, Hosts and Diseases
    • /
    • v.35 no.4
    • /
    • pp.271-276
    • /
    • 1997
  • We tried to compare the three kinds oi Metagonimur species. M. Wokognulci, Ifetafonimus Miyata type, and M. tnknhashii, which were Know to be distributed in Korea with polymerase chain reaction based-restriction fragment length polymorphism (PCR- RFLP) patterns. We amplified the internal transcribed spacer 1 (ITSI) site of ribosomal RNA and mitochondrial cytochrome c oxidase I (mCOI) gene. The restriction patterns of ITSI gene loth Rsc I, ALu I and Msp I showed multiple fragmented bands of different sizes between three kinds of Metcgonimus. In case of mc01 gene, Rsc I and Alu I enzymes produced differentially fragmented band patterns. According to the parsimony analysis of PCR-RFLP patterns, the estimated genetic divergence between M Wokognwai and Metasoninus Miyata type was 0.034880, between Metusoninus Miyata type and M. tckc- hushii was 0.028098, between M. wokogawai and M. tnkahashii was 0.018179. It is suggested that Metasonimus Miyata type may be separate species and evolutionize at the older time than the other two species.

  • PDF

A Study on Microstructural Evolution of Hot Rolled AZ31 Magnesium Alloy Sheets (열간 압연한 AZ31 마그네슘합금 판재의 미세조직 발달에 관한 연구)

  • Kim S. H.;Yim C. D.;You B. S.;Seo Y. M.;Chung I. S.
    • Proceedings of the Korean Society for Technology of Plasticity Conference
    • /
    • 2004.08a
    • /
    • pp.63-71
    • /
    • 2004
  • Recently, a sheet forming process of Mg alloys is highlighted again due to increasing demand for Mg wrought alloys in the applications of casings of mobile electronics and outer-skins of light-weight transportation. Microstructure control is essential for the enhancement of workability and formability of Mg alloy sheets. In this research, AZ31 Mg alloy sheets were prepared by hot rolling process and the rolling condition dependency of the microstructure and texture evolution was studied by employing a conventional rolling mill as well as an asymmetric rolling mill. When rolled through multiple passes with a small reduction per pass, fine-grained and homogeneous microstructure evolved by repetitive dynamic and static recrystallization. With higher rolling temperature, dynamic recrystallization was initiated in lower reduction. However with increasing reduction per pass, deformation was locallized in band-like regions, which provided favorable nucleation sites f3r dynamic recrystallization. Through post annealing process, the microstructures could be transformed to more equiaxed and homogeneous grain structures. Textures of the rolled sheets were characterized by $\{0002\}$ basal plane textures and retained even after post annealing. On the other hand, asymmetrically rolled and subsequently annealed sheets exhibited unique annealing texture, where $\{0002\}$ orientation was rotated to some extent to the rolling direction and its intensity was reduced.

  • PDF

Performance Analysis of OCDMA on Plastic Optical Fiber Access Network (플라스틱 광섬유를 사용한 통신망에서 OCDMA의 성능 분석)

  • Zhang, Ke;Suh, Hee-Jong
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.11 no.11
    • /
    • pp.1083-1092
    • /
    • 2016
  • In this paper, the performance of the optical code-division multiple access (OCDMA) technology on a plastic optical fiber (POF) access network, which had received much attention due to its low weight, large core diameter, flexibility, easy installation, and especially its high bandwidth, is analyzed. Recently, POF was a very attractive candidate for transmission media in an access network based on OCDMA technology. But the conventional OCDMA system only allows finite units to transmit and access simultaneously according to the number of channels which are restricted by BER, and so, in this paper, to resolve this problem a novel multi-priority reservation protocol is also proposed. By using this reservation scheme and a distributed arbitration algorithm, channel collision and destination conflict could be avoided. And this protocol can efficiently support the transmission of multimedia messages that require the different time-delay. The network throughput and average delay using various system parameters have been investigated by numerical analysis and simulation experiments. These results shows that the multi-priority reservation protocol in this POF access network based on OCDMA technology is valid and efficient.

FPGA Design of Adaptive Digital Receiver for Wireless Identification (무선인식을 위한 적응적 디지털 수신기의 FPGA 설계)

  • Seo Young-Ho;Kim Dong-Wook
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.9 no.4
    • /
    • pp.745-752
    • /
    • 2005
  • In this paper we propose and implement a digital part of a receiver system for identifying a moving object and its tracking position in wireless environment. We assumed UWB(Ultra Wide Band)-based communication system for target application and used serial communication method(RS-232). The proposed digital receiver consists of RS-232-type1/RS-232-type2 for input and output of serial communication, ID Detector for detecting IDs, and PISO&Buffer circuit to buffer input signals for appropriate operation of ID Detector. We implemented the digital receiver with minimal hardware(H/W) resource according to target application of UWB-based communication system. So it correlates input patterns with pre-stored patterns though repeated detecting method for multiple IDs. Since it has reference panerns in the Ve-stored form, it can detect various IDs instantly. Also we can program content and size of reference patterns considering compatibility with other systems .The implemented H/W was mapped into XC2S100PQ208-5 FPGA of Xilinx, occupied 727($30\%$) cells, and stably operated in the clock frequency of 75MHz(13.341ns).

A Study on Frequency Hopping Signal Detection Using a Polyphase DFT Filterbank (다상 DFT 필터뱅크를 이용한 도약신호 검출에 관한 연구)

  • Kwon, Jeong-A;Lee, Cho-Ho;Jeong, Eui-Rim
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.17 no.4
    • /
    • pp.789-796
    • /
    • 2013
  • It is known that the detection of hopping signals without any information about hopping duration and hopping frequency is rather difficult. This paper considers the blind detection of hopping signal's information such as hopping duration and hopping frequency from the sampled wideband signals. In order to find hopping information from the wideband signals, multiple narrow-band filters are required in general, which leads to huge implementation complexity. Instead, this paper employs the polyphase DFT(discrete Fourier transform) filterbank to reduce the implementation complexity. This paper propose hopping signal detection algorithm from the polyphase DFT filterbank output. Specifically, based on the binary image processing, the proposed algorithm is developed to decrease the memory size and H/W complexity. The performance of the proposed algorithm is evaluated through the computer simulation and FPGA (field programmable gate array) implementation.

Analysis for Vibration Characteristics of the Watermelon for Optimum Packaging Design in Domestic Distribution (국내 유통 수박의 적정 포장설계를 위한 진동특성 분석)

  • Jung, Hyun-Mo;Kim, Man-Soo;Kim, Ghi-Seok;Cho, Byeong-Kwan;Kim, Dae-Yong
    • KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
    • /
    • v.12 no.2
    • /
    • pp.97-102
    • /
    • 2006
  • Shock and vibration inputs are transmitted from the transporting vehicle through the packaging to the fruit. The vibration causes sustained bouncing of fruits against each other and the container wall. The steady state vibration input may cause serous fruit injury, and the damage is particularly severe if the fruits are bounced at its resonance frequency. The determination of the resonance frequencies of the fruits and vegetables may help the packaging designer to determine the proper packaging system providing adequate protection for the fruits, and to understand the complex interaction between the components of the fruits when they relate to expected transportation vibration inputs. To analyze the vibration properties of the watermelon for optimum packaging design during transportation, sinusoidal sweep vibration tests were carried out. The resonance frequency of the watermelon ranged from 19 to 32 Hz and the amplitude at resonance was between 1.6 and 2.9 G. The resonance frequency and amplitude at resonance frequency band of the watermelon decreased with the increase of the sample mass. The multiple nonlinear regression equation for predicting the resonance frequency of the watermelon were developed using the independent variables such as mass, input acceleration and sphericity.

  • PDF