• The KIPS Transactions:PartA
• /
• v.18A no.4
• /
• pp.135-142
• /
• 2011

This research is to design an effective buffer structure and its management for flash memory based high performance SSDs (Solid State Disks). Specifically conventional SSDs tend to show asymmetrical performance in read and /write operations, in addition to a limited number of erase operations. To minimize the number of erase operations and write latency, the degree of interleaving levels over multiple flash memory chips should be maximized. Thus, to increase the interleaving effect, an effective buffer structure is proposed for the SSD with a hybrid address mapping scheme and super-block management. The proposed buffer operation is designed to provide performance improvement and enhanced flash memory life cycle. Also its management is based on a new selection scheme to determine random and sequential accesses, depending on execution characteristics, and a method to enhance the size of sequential access unit by aggressive merging. Experiments show that a newly developed mapping table under the MBA is more efficient than the basic simple management in terms of maintenance and performance. The overall performance is increased by around 35% in comparison with the basic simple management.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.4
• /
• pp.151-160
• /
• 2015

Internet-of-Things(IoT) is the computing environment to provide valuable services by interacting with multiple devices, where diverse devices are connected within the existing Internet infrastructure and acquire context information by sensing. As the concern of IoT has been increased recently, most of the industries develop many IoT devices. And, many people are focused on the IoT application that is utilizing different technologies, which are sensor network, communication technologies, and software engineering. Developing on-ground IoT application is especially even more active in progress depending on increasing of on-ground IoT devices because it is possible for them to access dangerous and inaccessible situation. However, There are a few studies related IoT. Moreover, since on-ground IoT application, which is different from typical software application, has to consider device's characteristics, communication, and surround condition, it reveal challenges, decreasing reliability. Therefore, in this paper, we analyze reliability challenges related to maturity and fault tolerance, one of reliability attributes, occurring in developing on-ground IoT applications and suggest the effective solutions to resolve the challenges. To verify proposed the challenges and solutions, we show result that is applying the solutions to applications. By presenting the case study, we evaluate the effectiveness of applying the solutions to the application.

• Management & Information Systems Review
• /
• v.36 no.4
• /
• pp.53-80
• /
• 2017

The purpose of this study is to examine the determinants of the number of bank relationships in Korea. Firm-specific determinants considered here include leverage, size, age, return on asset, investment grade, tangibility, liquidity, R&D expenditure. We estimate the effects of these variables, and compare the results with those from previous studies performed for other economies. Concerning the effects of business cycle, we find that the business cycle is an important factor in determining the number of bank relationships. The number of bank relationships varies over the business cycle, and we notice a counter-cyclical behavior, which means the number decreases during economic expansions and increases during contractions. This result can be interpreted as a result of firms' diversification of borrowings into multiple banks in order to reduce the liquidity risk during the recession. In the subsets, however, the number of bank relationships for large firms is stable regardless of the business cycle. Unlisted firms, non-chaebol, and low credit quality firms which have relatively limited access to alternative sources of financing show counter-cyclical behavior. Finally, such phenomena is not observed in the non-competitive credit market, while they show a counter-cyclical behavior in the competitive credit market.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.506-519
• /
• 1999

An adaptive array antennal and a CCI canceller have been considered as techniques for cancelling Multi-User Interference(MUI) in Direct Sequence Code Division Multiple Access(DS-CDMA) system. These techniques have different problems respectively in the process of cancelling MUI as the number of users increases. For that reason, the scheme which can cancel MUI effectively by compensating for the problems of each of the techniques has been required. For the scheme, the technique to connect an adaptive array antenna and a CoChannel Interference(CCI) canceller in cascade form has been studied. In the existing study about the cascade connection method, the effect of cancelling MUI about two interference signals is analyzed, but the analysis for the quantitative BER(Bit Error Rate) improvement according to the number of users is not considered. Therefore, in this paper, we have analyzed the degree of BER performance improvement quantitatively according to the number of users by introducing the receiving system, which connects an adaptive array antenna and a CCI canceller to a DS-CDMA system in cascade form. For the method of analyzing the performance, we have performed the theoretical analysis and the simulation, considering the case of adopting only an adaptive array antenna and of cascade connection respectively, and having compared and analyzed the results. From the results, it is confirmed that in the case of adopting only an adaptive array antenna, the problems occur in the process of cancelling MUI according to the number of users and the receiving direction of interference signals, and can be compensated by the cascade connection method. In conclusion, we have known that MUI is cancelled effectively by using the cascade connection method, and the much better BER performance improvement is obtained.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.835-842
• /
• 2004

In this paper, we have analyzed the MC-DS/CDMA system with input signal synchronized completely through adjustment of the gain in the PLL loop, by using the hybrid SC/MRC-(2/3) technique, which is said to one of the optimal diversity techniques under the multi-path fading environment, assuming that phase error is defined to the phase difference between the received signal from the multi-path and the reference signal in the PLL of the receiver. Also, assuming that the regarded radio channel model for the mobile communication is subject to the Nakagami-m fading channel, we have developed the expressions and performed the simulation under the consideration of various factor, in the MC/DS-CDMA system with the hybrid SC.MRC-(2/3) diversity method, such as the Nakagami fading index(m), $the\;number\;of\;paths\;(L_p),$ the number of hybrid SC.MRC-(2/3) $diversity\;branches\;(L,\;L_c),$ the number of users (K), the number of subcarriers (U), and the gain in the PLL loop. As a result of the simulation, it has been confirmed that the performance improvement of the system can be achieved by adjusting properly the PLL loop in order for the MC/DS-CDMA system with the hybrid SC/MRC-(2/3) diversity method to receive a fully synchronized signal. And the value of the gain in the PLL loop should exceed 7dB in order for the system to receive the signal with prefect synchronization, even though there might be a slight difference according to the values of the fading index and the spread processing gain of the subcarrier.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.799-806
• /
• 2004

A growing diversity of pervasive devices is gaming access to the Internet and other information. However, much of the rich multimedia contents cannot be easily handled by the client devices because of the limited communication, processing, storage and display capabilities. The in-tegration of voice, data and video service modified the target of networking technologies. Networks must have some the capabilities for in-tegration of various services and also for QoS support as required by each of those service. Because of these reasons, we developed EAGIS(Efficient ATM Gateway for real time Internet Service) to provide seamless multimedia service between the ATM network and the Internet. EAGIS consists of the interworking unit, content server, transcoding server, and the serveice broker to provide seamless multimedia service be-tween the ATM network and the Internet. In this paper, we design the architecture and transcoding service scenario of the EAGIS. When the RTP is used for the bi-directional communication, transcoding time is configured by the time-stamp of RTCP. When HTTP is used for unidirec-tional communication, self-timer is used. By using these reference time, standard transcoding method is applicable according to the frame trans-mission rate and network traffic load. And we can also assure the QoS of the multiple users` effective bandwidth by our algorithm.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.4
• /
• pp.87-93
• /
• 2009

Wireless mesh networks (WMNs) are emerging technologies that provide ubiquitous environments and wireless broadband access. The aggregate capacity of WMNs can be improved by minimizing the effect of channel interference. The IEEE 802.11b/g standard which is mainly used for the network interface technology in WMNs provides 3 multiple channels. We must consider the channel scanning delay and the channel dependency problem to effectively assign channels in like these multi-channel WMNs. This paper proposes a cluster-based channel assignment (CB-CA) algorithm for multi-channel WMNs to solve such problems. The CB-CA does not perform the channel scanning and the channel switching through assigning co-channel to the inter-cluster head (CH) links. In the CB-CA, the communication between the CH and cluster member (CM) nodes uses a channel has no effect on channels being used by the inter-CH links. Therefore, the CB-CA can minimize the interference within multi-channel environments. Our simulation results show that CB-CA can improve the performance of WMNs.

• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.212-224
• /
• 1998

There are two major factors of degrading the performance in the forward link of DS/CDMA systems. One is the multiple access interference (MAI) caused by using the same frequency bands simultaneously and the other is the multipath lading due to multipath propagation. PN codes which have minimum cross correlation properties among spread spectrum codes are necessary to reduce the MAI. In the conventional IS-95A system, the PN sequence has the period of $2^{15}$ and is of the length of 64 chips for spreading each data. In this case, since the length of PN code per bit is very short compared to the period of the PN code, the performance of the conventional system is not satisfied in view of suppressing the multipath interference. However, the correlation property of the PN codes at the demodulation can be improved by increasing the interval of Integration at the demodulation. This paper proposes a demodulation method to reduce the cross correlation among PN codes. The performance of the proposed demodulation method is investigated through computer simulations. We used multipath Ray lading channel and AWGN channel in the simulation. Our simulation results show the improved performance of $0.25{\sim}0.5dB$ SNR in a given BER compared to the conventional demodulation scheme.

• Journal of Digital Convergence
• /
• v.13 no.4
• /
• pp.227-233
• /
• 2015

The recent health care is growing rapidly want to receive offers users a variety of medical services, can be exploited easily exposed to a third party information on the role of the patient's hospital staff (doctors, nurses, pharmacists, etc.) depending on the patient clearly may have to be classified. In this paper, in order to ensure safe use by third parties in the health care environment, classify the attributes of patient information and patient privacy protection technique using hierarchical multi-property rights proposed to classify information according to the role of patient hospital officials The. Hospital patients and to prevent the proposed method is represented by a mathematical model, the information (the data consumer, time, sensor, an object, duty, and the delegation circumstances, and so on) the privacy attribute of a patient from being exploited illegally patient information from a third party the prevention of the leakage of the privacy information of the patient in synchronization with the attribute information between the parties.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.1-10
• /
• 2011

As requirements of embedded system get complicated, the tool for analyzing the reliability of embedded software is being needed. A probabilistic modeling is used as the way of analyzing the reliability of a software and to apply it to embedded software controlling multiple devices. So, it is necessary to specialize that to embedded software. Also, existing reliability analyzers should measure the transition probability of each condition in different ways and doesn't consider reusing the model once used. In this paper, we suggest a reliability analyzer for embedded software using embedded software Markov chin model and a unit testing tool. Embedded software Markov chain model is model specializing Markov chain model which is used for analyzing reliability to an embedded software. And a unit testing tool has host-target structure which is appropriate to development environment of embedded software. This tool can analyze the reliability more easily than existing tool by automatically measuring the transition probability between units for analyzing reliability from the result of unit testing. It can also directly apply the test result updated by unit testing tool by representing software model as a XML oriented document and has the advantage that many developers can access easily using the web oriented interface and SVN store. In this paper, we show reliability analyzing of a example by so doing show usefulness of reliability analyzer.