• The Journal of Engineering Research
• /
• v.3 no.1
• /
• pp.97-106
• /
• 1998

In this paper, we analyze the WLL systems with high chip rate, which virtually eliminates the multipath fading effects by appling space diversity functions. First, we found out the capacity of reverse link which resulted from performing computer simulation of the transmission and reception of the WLL systems to evaluate the performance of the WLL systems in real environment. Besides, we analyze the radio propagation medium and the link budget and from the results, made RCSU for providing of the AWGN multipath fading channel. This RCSU is produced to characterize the urban radio propagation medium in various environments. From the simulation results, diversity gains increase as depth of fading becomes deeper. We also confirm that the systems applied diversity reduce the effects of multipath fading phenomena which cause to degrade the performance of WLL systems, based on the results $E_b/N_o$ and BER curve.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.4
• /
• pp.184-190
• /
• 2006

Recently, Lee et al. have proposed an algorithm utilizing the signals from different paths by using bottom mounted simple linear array to estimate 3-D location of oceanic target. But this algorithm assumes that sound velocity is constant along depth of sea. Consequently, serious performance loss is appeared in real oceanic environment that sound speed is changed variously. In this paper, we present a 3-D near field localization algorithm for inhomogeneous sound speed. The proposed algorithm adopt localization function that utilize ray propagation model for multipath environment with linear sound speed profile(SSP), after that, the proposed algorithm searches for the instantaneous azimuth angle, range and depth from the localization cost function. Several simulations using linear SSP and non linear SSP similar to that of real oceans are used to demonstrate the performance of the proposed algorithm. The estimation error in range and depth is decreased by 100m and 50m respectively.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3
• /
• pp.154-162
• /
• 2008

Signals in an underwater channel get distorted by multipath propagation. In this paper, pre-coding method is suggested which helps comprehending the signals with minimum equalization. The signals are transformed based on the knowledge of the impulse response of the channel. Proposed pre-coding method is tested by simulations based on the ray theory and through water tank experiments. In weak multipath environment, in case of an SNR of about 20 dB, BER is $10^{-3}{\sim}10^{-4}$, while in strong multipath environment, similar BER is achieved with SNR of about 30 dB. In order for the pre-coding method to be used for underwater vehicles, channel prediction method utilizing the waveguide invariant is suggested and tested.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.1
• /
• pp.20-26
• /
• 2015

It is very difficult to design an underwater communication system because of multipath, Doppler effects, noise, and attenuation. These factors lead to errors in the communication performance and maximum propagation distance. In this study, we calculate the distance that can be realized using the direct-sequence code division multiple access (DS-CDMA) technique with direct-sequence spread spectrum (DSSS) in an underwater communication system considering only the attenuation and noise. We also compare the estimated and calculated propagation distances obtained for several different scenarios.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.917-920
• /
• 2006

In mobile environments, their is more than one propagation path between each transceiver and Receiver have two or more delayed multipath signals. Delayed multipath signals can cause ISI and Receiver needs a adaptive algorithm to estimate a channel periodically. Also adaptive antenna using adaptive algorithm provide a significant increase in capacity, performance and coverage. This paper describes various LMS algorithm and evaluate the performance of array antenna Base station by using LMS algorithm in the presence of multipath signals and multiple users. As a result of simulation, Adaptive array antenna systems are able to adjust their antenna pattern to select desired signals, and reduce interference.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.6
• /
• pp.75-81
• /
• 2001

In this paper we analyzed the localization error of near-field detection algorithm in the sea. The near-field detection algorithms using triangulation and wavefront curvature basically assume a signal in two dimension of bearing and range. But the assumption causes localization error because there is three dimension of bearing, range, and depth in the sea. Even through three dimensional effect is considered, the localization error is occurred if multipath propagation in the sea is ignored. To analyze the localization error in the sea, we simulate the near-field localization using acoustic propagation model and focused beamforming considering wavefront curvature. The simulation results indicate that localization error always occurs in the sea and the error varied with sound velocity profile, water depth, bottom slope, source range, etc.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1974-1984
• /
• 1999

In this paper, we introduce a highly efficient data structure that effectively captures the multipath phenomenon needed for accurate propagation modeling and fast propagation prediction. The proposed object representation procedure is called 'circular representation (CR)' of microwave masking objects such as buildings, to improve over the conventional vector representation (VR) form in fast ray tracing. The proposed CR encapsulates a building with a circle represented by a center point and radius. In this configuration, the CR essentially functions as the basic building block for higher geometric structures, enhancing the efficiency more than when VR is used alone. The simulation results indicate that the proposed CR scheme reduces the computational load proportionally to the number of potential scattering objects while its hierarchical structure achieves about 50% of computational load reduction in the hierarchical octree structure.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.5
• /
• pp.53-59
• /
• 2000

In this paper, considering configuration of the earth and environment of country, it is classified a radio propagation environment Multipath propagation measuring system based on PN code correlation detection method is built to study a wave propagation characteristics of 1.95GHz. Considering the characteristic artificial structure of country, Cihwa plant superintendent area has been selected for basic and accurate measurement a radio propagation characteristic. The experiments are carried out with respect to the RMS delay Spread and the received power in the two kind of geographical areas, LOS (Line of Sight) and N-LOS (Non Line of Sight). The measurement result of that received power of LOS area is -1.6∼-28.8dBm, RMS delay spread is 0.023㎲∼0.22㎲ and received power of N-LOS area is 16∼36.5dBm and RMS delay spread is 0.068∼0.37㎲.

• Journal of Communications and Networks
• /
• v.5 no.4
• /
• pp.309-318
• /
• 2003

This paper presents an in-depth study of a UWB indoor radio channel between 1 and 9 GHz, which was used for the subsequent development of a new statistical UWB multipath channel model, focusing on short range indoor scenarios. The channel sounding process was carried out covering different indoor environments, such as laboratories, halls or corridors. A combination of new and traditional parameters has been used to accurately model the channel impulse response in order to perform a precise temporal estimation of the received pulse shape. This model is designed specifically for UWB digital systems, where the received pulse is correlated with an estimated replica of itself. The precision of the model has been verified through the comparison with measured data from equivalent scenarios and cases, and highly satisfactory results were obtained.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.916-923
• /
• 2002

In this paper, we propose dual-polarization technique which double the system capacity without increasing any other bandwidth. In theory, dual-polarization technique can double system capacity by using an orthogonal electromagnetic wave. However, cross-polarization interference and multipath interference degrade system performance in practice. To cope with this problem, we propose Cross Polarization Interference Canceller(XPIC) for ITS/DSRC system which can mitigate the XPI as well as multipath propagation interference. We also analyze and discuss its performance with relevant computer simulation results.