• Proceedings of the Optical Society of Korea Conference
• /
• 2009.02a
• /
• pp.507-508
• /
• 2009

We have proposed and demonstrated noncontact refractometer incorporating a fiber bundle. The fiber bundle is composed of a TEC(thermally expended core) fiber and hundreds multimode fibers. The fiber is designed in such a way that the detected reflected optical power from a liquid is constant against the distance between fiber bundle and liquid surface. Low differactive characteristic of TEC fiber make it possible to increase the available distance between the fiber bundle and liquid surface, The obtained sensitivity, optical intensity variation by change of refractive index of liquid is 0.4.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.143-146
• /
• 1987

Fiber optics provide a solution to the problems at interference, capacity and reliability in communication. Approximately 20 kilometera of a six-fiber, multimode, longwave($1.3{\mu}m$), graded index silica glass fiber optic cable was helically wrapped around a phase conductor at a Korea Electric Power Corporation(KEPCO) 154KV transmission line. This paper presents an economic comparison of several fiber optic cable installation alternative and discusses the characteristics at the helically wrapped fiber cable, as well as the entire installation, including high voltage phase-to-ground (PTG) end termination, and splicing. The fiber link was installed for the field trial and practical use with overhead composite optical fiber cable which installation performed a few years earlier some other location and is intended to accommodate not only telephone but also supervisory Control and Data Acquisition(SCADA), protective relaying, and telemetry functions.

• Journal of Sensor Science and Technology
• /
• v.16 no.6
• /
• pp.441-448
• /
• 2007

In this study, the fiber-optic fluoro-immunosensor was designed to detect foodborne pathogens. The fabricated system is composed of the multimode optical fiber on which antibodies are immobilized. Then, a sandwich immunoassay is applied to the fabricated the fiber-optic fluoro-immunosensor. In the "sandwich" binding format, a primary or "capture" antibody is immobilized on the core surface of the multimode optical fiber and a secondary or named as "tracer" antibody is added to the bulk solution. A tracer is labeled FITC (fluorescein isothiocyanate; ${\lambda}ex$=492 nm, ${\lambda}em$= 520 nm). Different concentrations of antigens are tested in different fibers. The detection limit of the fabricated system is 5.08×103 cfu/ml for Vibrio antigen and $0.1{\mu}g/ml$, $0.05{\mu}g/ml$ in non-labeled monolayer phosphate buffered saline (NMP), non-labeled monolayer carbonate bicarbonate buffer (NMC), respectively.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.02a
• /
• pp.127-128
• /
• 2007

• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.248-253
• /
• 1999

In this paper, we have investigated a fiber type active coupler which utilizes the mode coupling between the side polished single mode optical fiber and the active multimode planar waveguide. The proposed device can be used for not only tunable wavelength filter or optical intensity modulator but also a tool for measuring optical properties of guiding material such as refractive index, birefringence, electro-optic coefficient, and thermo-optic coefficient. We gave designed and optimized a coupler structure using the BPM and fabricated the device using thermo-optic polymer as active planar waveguide overlay. The device showed that insertion loss was less then 0.5 dB, extinction ratio was -13 dB at the resonance wavelength, and the wavelength tunablity due to thermo-optic effect was -1.5 nm/$^{\circ}C$. The active coupler using thermo-optic effect can be used as a wavelength tunable filer, an optical intensity modulator and an optical sensor. pulses that are subsequently compressed by a dispersive optical fiber. Experimental results show that $sech^2$ shape pulses with a pulse width of ~14 ps and a time bandwidth product of ~0.34 are successfully generated at 10 GHz repetition rate. In contrast to other methods, such as higher order soliton compression, this approach does not depend on the optical power and thus shows promise for application to low-power lasers.

• Journal of Sensor Science and Technology
• /
• v.13 no.3
• /
• pp.207-212
• /
• 2004

We have investigated the optical characteristics of a directional coupler made of a side-polished polarization maintaining fiber in contact with a multimode planar waveguide and its applications as sensors. A device structural condition to achieve the polarization insensitive wavelength response has been presented. The fabricated devices revealed a superior immunity to the bending and the deformation of PM fibers in the input section. It is experimentally shown that the proposed device is suitable for a remote fiber sensor.

• Journal of Sensor Science and Technology
• /
• v.14 no.4
• /
• pp.286-290
• /
• 2005

We have demonstrated a refractometer for liquid based on a side-polished fiber. The device consists of a side-polished single mode fiber and a rectangular space which plays a role of the multimode planar waveguide when it is infused with a liquid. We presented a simple method to acquire the refractive index of a liquid by use of the spacings of periodic resonance wavelengths of the device. The resolution of the fabricated refractometer was order of $10^{-5}$

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.5
• /
• pp.263-266
• /
• 2006

An optical microphone was developed using a dual-core multi-mode fiber block and a membrane type micromirror. The fiber block serves as a compact optical head, and the micromirror as a reflective diaphragm. The micromirror is designed to be suspended through a silicon bar connected t a frame, allowing for displacement induced by acoustic waves. The optical head is implemented by integrating two multi-mode fibers in a single block, and used to transfer light signals between it and the diaphragm. For the assembled microphone, its static characteristics were observed to reveal the operating point defined as the optimum distance between the optical head and the diaphragm. And its dynamic response was tested to exhibit a frequency bandwidth of 3 kHz with the variation of $\sim5dB$.

• Journal of Navigation and Port Research
• /
• v.32 no.9
• /
• pp.723-727
• /
• 2008

Sensing performances of evanescent field absorption (EFA) hetero-core fiber sensor has been presented based on EFA by changing the length and the core diameter of the single mode fiber. Experimental results have demonstrated a good feature in their relationship between the length and the core diameter of the single mode fiber. The sensor consists of 2 fiber optics which have the same cladding diameter of $125{\mu}m$ However one fiber optic used is single mode and has varying core diameter ranging from 3.3 to $5.6{\mu}m$. The other fiber is multimode type and has a thicker fixed core diameter of $62.5{\mu}m$. The 2 fiber optics are thermally spliced together. Experiments conducted to measure the resonance wavelength were carried out over a range of refractive index, to find the optimum sensing length Experiments show that core diameter of the single mode fiber and sensing length offects the linearity and sensitivity.

• ETRI Journal
• /
• v.6 no.2
• /
• pp.15-17
• /
• 1984

A long-wavelength ($1. 3\mum$) multimode fiber-optic transmission system has been developed and the field trial system has been installed over 17.3km distance in Daejeon Area by KETRI. The 45Mb/s and 90Mb/s system operate with BER $10^-9$over 17.3km distance, and they successfully operate on the route of 34. 6km length when the fiber cable is simply connected at one end. Average loss of the fiber cable shows 0. 81dB/km including splice loss and the average bandwidth over the 17. 3km distance is 170MHz.