• Journal of Korea Multimedia Society
• /
• v.23 no.9
• /
• pp.1171-1180
• /
• 2020

The number of the PV systems installed in south korea has been gradually increasing. Interest of operation & management of PV System is rising up as PV System installation trends to increase. The vital function of operation & management is the monitoring system. Most monitoring systems are only available for equipment of suppliers and manufacturers. In this study, a monitoring system was implemented to support multi-domain equipment (inverter, junction box, water distribution board, environmental sensors) that are not limited to specific manufacturers. Monitoring system includes a visualization function, which makes it easy for users to check the power generation and the operation status of the equipment of PV System. In the future, this monitoring system will be utilized as an operation & maintenance foundation element in the PV system industry.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.6
• /
• pp.440-444
• /
• 2016

In this paper, an equivalent circuit model for near-field noise emission is proposed to implement a multimedia operation-monitoring system for mobile devices. The proposed model includes a magnetic field probe that captures noise emissions from multimedia components, and a transfer function for near-field noise coupling from a transmission line source to a magnetic field probe. The proposed model was empirically verified with transfer function measurements of near-field noise emissions from 10 kHz to 500 MHz. With the proposed model, a magnetic field probe was optimally designed for noise measurement on a camera module and an audio codec in a mobile device. It was demonstrated that the probe successfully captured the near-field noise emissions, depending on the operating conditions of the multimedia components, with enhanced sensitivity from a conventional reference probe.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.1
• /
• pp.26-32
• /
• 2011

It is very important for more effective military operation to share information required in recognizing a situation by monitoring battlefield. The recognition of situations is offered visually though multi-media systems such as a COP(Common Operation Picture), UAV etc. The operating method has rapidly changed into Network-Centric Warfare (NCW). As a result, the data that these Multimedia systems should control is increasing. Improved performance of Multimedia systems is required to deal with them. In this paper, we propose Extended-Military Multimedia System(E-MMS) applying the most excellent scheduling method in terms of meet-ratio in real time when Multimedia systems carry out assigned information in real time for monitoring as the method of improved performance. As a result of utility about proposed system, it is verified that realtime EDF(Earliest Deadline First) scheduling method is more improved up to 20% compared to non-realtime FCFS(First Come First Service) in terms of the deadline meet ratio.

• Journal of Korea Multimedia Society
• /
• v.4 no.6
• /
• pp.570-578
• /
• 2001

Boundary scan architecture test methodology was introduced to facilitate the testing of complex printed circuit board. The boundary scan architecture has a tremendous potential for real time monitoring of the operational status of a system without interference of normal system operation. In this paper, a new type of embedded controller for real time monitoring of the operational status of a system is proposed and designed by using boundary scan architecture. The proposed real time monitoring embedded controller consists of test access port controller and an embedded controller proposed real time monitoring embedded controller using boundary scan architecture can save the hard-wire resource and can easily interface with boundary scan architecture chip. Experimental results show that the real time monitoring using proposed embedded controller is more effective then the real time monitoring using host computer.

• Journal of Korea Multimedia Society
• /
• v.21 no.5
• /
• pp.545-557
• /
• 2018

The Global Positioning System (GPS) has become popular and widely used in many fields from military to civilian applications. However, GPS signals are suffered from interference due to its weak signal over wireless channel. There are many types of interference, such as jamming, blocking multipath, and spoofing, which can mislead the operation of GPS receiver. In this paper, vector-based tracking loop model with integrity check is proposed to detect and mitigate the harmful effect of interference on GPS receiver operation. The suggested methods are implemented in the tracking loop of GPS receiver. As a first method, integrity check with carrier-to-noise ratio (C/No) monitoring technique is applied to detect the presence of interference and prevent contaminated channels out of tracking channels to calculate position. As a second method, a vector-based tracking loop using Extended Kalman Filter with adaptive noise covariance according to C/No monitoring results. The proposed methods have been implemented on simulated dataset. The results demonstrates that the suggested methods significantly mitigate interference of Additive White Gaussian Noise (AWGN) and improve position calculation by 44%.

• Journal of Korea Multimedia Society
• /
• v.19 no.2
• /
• pp.405-410
• /
• 2016

Elevator industry is a field that is mechanical, electrical and electronic technology and constantly requires inspection and maintenance considering various applications and various types. Recently, various elevator control and monitoring technologies with IT are developing for elevators on land. But technologies with IT have been hardly done in marine elevator that is consistently assured safety and reliability of life cycle for its parts in poor environment. In this paper, we implemented embedded main controller, floor controller and car controller that meet the requirements and use NMEA network protocol by analyzing home and abroad integrated elevator operation and management systems. Especially, we secured reliability of maintenance by real-time fault diagnosis and control that was implemented with limit switch, gyro sensor, temperature/humidity/barometric pressure sensor and fire detection sensor thinking over the environmental conditions of terrestrial and marine elevator.

• Journal of Korea Multimedia Society
• /
• v.22 no.5
• /
• pp.601-612
• /
• 2019

As the $4^{th}$ industrial revolution is accelerating, IT convergence application technologies are attracting attention in various fields. In the manufacturing industry, Smart Factory technology, which is blended with IT technology, has been developed to solve the problem casued by the decrease of the labor force, and a monitoring server is required to remotely control the equipment or to inquire about the operation status of the factory. In this paper, we designed and implemented RESTful API for data sharing between factory equipment and monitoring server in Smart Factory. In order to verify the designed API, a testbed was operated for an actual plastics manufacturing plant. As a result, it was confirmed that the testbed can be operated normally in actual operating environment.

• International Journal of Contents
• /
• v.11 no.2
• /
• pp.31-36
• /
• 2015

Recent years have seen a significant increase in demand for multimedia data over wireless sensor networks for monitoring applications that utilize sensor nodes to collect multimedia data, including sound and video. However, the multimedia streams generate a very large amount of data. When data transmission schemes for traditional wireless sensor networks are applied in wireless multimedia sensor networks, the network lifetime significantly decreases due to the excessive energy consumption of specific nodes. In this paper, we propose a data compression scheme that implements the Chinese remainder theorem to a wireless multimedia sensor network. The proposed scheme uses the Chinese Remainder Theorem (CRT) to compress and split multimedia data, and it then transmits the bit-pattern packets of the remainder to the base station. As a result, the amount of multimedia data that is transmitted is reduced. The superiority of our proposed scheme is demonstrated by comparing its performance to that of an existing scheme. The results of our experiment indicate that our proposed scheme significantly increased the compression ratio and reduced the compression operation in comparison to those of existing compression schemes.

• Journal of Korea Multimedia Society
• /
• v.21 no.8
• /
• pp.897-908
• /
• 2018

In this paper, we propose a security framework for a cluster drones network using the MAVLink (Micro Air Vehicle Link) application protocol based on FANET (Flying Ad-hoc Network), which is composed of ad-hoc networks with multiple drones for IoT services such as remote sensing or disaster monitoring. Here, the drones belonging to the cluster construct a FANET network acting as WTRP (Wireless Token Ring Protocol) MAC protocol. Under this network environment, we propose an efficient algorithm applying the Lightweight Encryption Algorithm (LEA) to the CTR (Counter) operation mode of WPA2 (WiFi Protected Access 2) to encrypt the transmitted data through the MAVLink application. And we study how to apply LEA based on CBC (Cipher Block Chaining) operation mode used in WPA2 for message security tag generation. In addition, a modified Diffie-Hellman key exchange method is approached to generate a new key used for encryption and security tag generation. The proposed method and similar methods are compared and analyzed in terms of efficiency.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.11b
• /
• pp.31-34
• /
• 2002

IDC는 기업 및 개인 고객에게 전산 설비나 네트워크 설비를 유치하여 유지·보수 등의 서비스를 제공하는 곳으로, 서버 장비 및 통신장비의 운영과 관리를 대행하여 서버의 안정성, 보안성과 서버가 제공하는 서비스의 품질을 유지해 주는 시설이다. 하지만 학교나 일부기업에서는 자신들의 고유 서비스를 위해 호스트를 자신들의 NOC(Network Operation Center)에 놓아두게 되고, 그러면 IDC에서 지원하는 다양한 관리 서비스를 제공받지 못한다. 본 논문에서는 웹 기반 IDC 관리형 인터넷 서비스 모니터링 및 관리시스템의 구조를 제안하고 시스템을 구현한다. 웹에서 효과적인 모니터링 및 관리를 위하여 JAVA 기반의 설계를 하였으며, 인터넷 서비스에 대한 효율적인 관리를 위하여 ICMP 프로콜을 사용하였다. 제안된 시스템을 이용하여 원격지의 서버의 상태나 인터넷 서비스의 전반적인 상태를 일정하게 유지하며, 웹을 기반으로 하여 모니터링 및 관리를 할 수 있다. 중요 기능은 데이터의 주기적인 수집과, 수집된 정보를 데이터 베이스에 저장함으로써 네트워크의 상태 변화에 대한 지속적인 관찰이 가능하다. 또한 시스템에 어떤 문제가 발생하였다고 판단될 경우 효율적이고 신속한 대처가 이루어지도록 하기 위하여 관리자에게 보고서를 제출하게 된다.