• 제목/요약/키워드: Multiloop Mechanism

검색결과 6건 처리시간 0.019초

비결합 다관절 평면기구의 컴퓨터원용 운동해석을 위한 컴포넌트 모듈기법 (Component Modular Approach to Computer-Aided Kinematic Analysis for General Planar Uncoupled-Connected Multiloop Mechanisms)

  • 신중호
    • 대한기계학회논문집
    • /
    • 제17권8호
    • /
    • pp.1883-1897
    • /
    • 1993
  • Interactive computer-aided analysis of mechanical systems has recently been undergoing an evolution due to highly efficient computer graphics. The industrial implementation of state-of-the-art analytical developments in mechanisms has been facilitated by computer-aided design packages because these rigid-body mechanism analysis programs dramatically reduce the time required for linkage design. This paper proposes a component modular approach to computeraided kinematic motion analysis for general planar multiloop mechanisms. Most multiloop mechanisms can be decomposed into serveral components. The kinematic properties (position, velocity, and acceleration) of every node can then be determined from the kinematic analysis of the corresponding component modules by a closed-form solution procedure. In this paper, 8 types of modules are defined and formulations for kinematic analysis of the component modules are derived. Then a computer-aided kinematic analysis program is developed using the proposed approach and the solution procedure of an example shows the effectiveness and accuracy on the approach.

변위행렬법을 이용한 RSCS-SSP 공간기구의 치수합성과 운동해석 (Dimensional Syntheris and Kinematic Analysis of RSCS-SSP Spatial Mechanism with use of the Displacement Matrix Method)

  • 강희용
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 1997년도 춘계학술대회 논문집
    • /
    • pp.113-118
    • /
    • 1997
  • This paper presents the dimensional synthesis and kinematic analysis of the RSCS-SSP motion generating spatial mechanism using the displacement matrix method. This type of spatial mechani는 is used for the Mcpherson suspension in small automobiles. It is modeled for the wheel bump/rebound and steering motion. First, the suspension is modeled as a multiloop spatial rigid body guidance mechanism for the two major motions. Then the design equations for SSP, RS, and SC strut links are applied to synthesize an RSCS-SSP for up to three prescribed positions for the steering motiom from the suspension design specification. Thus a RSCS-SSP mechanism which is synthesized is also analyzed for the displacement during the steering motion.

  • PDF

Multiloop Edgewise Arch Wire가 야기하는 응력분포에 관한 광탄성학적 연구 (A PHOTOELASTIC STUDY OF THE STRESS DISTRIBUTION BY MULTILOOP EDGEWISE ARCH WIRE)

  • 염정배;이병태
    • 대한치과교정학회지
    • /
    • 제20권2호
    • /
    • pp.267-280
    • /
    • 1990
  • The purpose of this study was to investigate the force mechanism of Multiloop Edgewise Arch Wire and the intensity and distribution of stresses with vertical and intermaxillary elastics. The obtained results were as follows. 1. When plain wires were inserted and vertical and intermaxillary elastics were used in the upper and lower arch, the stresses of the anterior and posterior ends of wires were observed greatly but the stresses of the premolar were very small. 2. When MEAW were inserted in upper and lower arch, the upper 1st and 2nd premolar and the lower 1st premolar were extruded greatly. 3. In the area of the upper 1st molar and the lower 2nd premolar and the lower 1st molar, any stresses were not observed. 4. The vertical elastic counteracted the intrusion force of the MEAW in the anterior teeth but could not affect on posterior teeth. Using with the Class II elastics, the distal tipping force and extrusion force were exerted in the upper anterior teeth and the intrusion forces of the lower anterior teeth were relieved. Using with the Class III elastics, the extrusion force were exerted in the upper and lower anterior teeth, the distal tipping force were increased in the lower posterior teeth. 5. The Class II elastic counteracted the anterior intrusion force of the MEAW and extruded and tipped mesially the lower 2nd molar. The intrusion force of the MEAW also could not overcome the extrusion force of the class II elastics. 6. When the Class III elastics were engaged, the upper 2nd molar was extruded in spite of the intrusion forces of the MEAW and the extrusion forces of the lower anterior teeth and distal tipping forces in the posterior teeth were observed.

  • PDF

전치부 개방교합의 진단과 치료 (The Diagnosis and Treatment of Anterior Openbite Malocclusion)

  • 장영일;문성철
    • 대한치과교정학회지
    • /
    • 제28권6호
    • /
    • pp.893-904
    • /
    • 1998
  • 교정적으로 치료할 수는 있지만 많은 노력을 필요로 하는 부정교합들이 존재한다. 특히, 전방 개교는 치료하기 어렵고, 많은 경우 외과적 수술을 동반하여야 한다. 이러한 문제를 해결하기 위해, 여러 치료기전에 대한 연구가 소개되었다. 제안된 치료기전들은 직접, 간접적으로 근신경계와 형태학적인 특징과 원인적 혹은 환경적 요소에 기초를 둔다. 성장 변이에 따라 안모의 수직 관계는 증가하나, 적절한 치아치조 보상기전으로 정상교합 관계가 유지된다. 그러나, 부적절하거나, 부정적인 치아치조 보상기전이 일어나는 경우 개교가 발생할 수 있다. 골격 부조화가 너무 심해 교정치료만으로 해결되기 어렵다면, 악구강계의 기능과 심미를 증진시키기 위하여 수술이 행해져야만 한다. 그러나, 많은 경우 적절한 진단과 치료계획으로 주어진 골격패턴에 알맞게 교정 치료를 변형시키면, 만족스런 결과를 얻을 수 있다. Multiloop Edgewise Arcgwire(MEAW) 기법은 주로 치아치조 영역에서 치료 변화가 일어나며, 자연적인 치아치조 보상기전과 상당한 유사성을 보인다. 다시 말해서 MEAW기법은 교정의가 자연적인 치아치조 보상을 교정적으로 유도한다고 할 수 있다. 골격 패턴에 알맞은 교정적인 치아치조 보상으로 개교를 치료했다고 해도, 자연적인 치아치조 보상을 억재해왔던 원인요소가 남아 있다면, 재발이 일어난다. 원인요소는 초진시 진단되고 치료와 보정시기에도 고려되어야한다.

  • PDF

Multiloop Edgewise Arch Wire의 응력분포에 대한 광탄성학적 연구 (A PHOTOELASTIC STUDY OF THE STRESS DISTRIBUTION ON THE MULTILOOP EDGEWISE ARCH WIRE)

  • 이승호;김정기
    • 대한치과교정학회지
    • /
    • 제24권4호
    • /
    • pp.969-982
    • /
    • 1994
  • This study was designed to investigate the stress distribution, intensity and force mechanism derived from the MEAW by photoelastic stress analysis of the artificial teeth and surrounding bone composed of photoelastic material(PL-3) The findings of this study were as follows, 1. In case of no elastic on the MEAW with tip back, the moderate stress was observed on the molar and canine area, and the light stress was observed on the other area. 2. In case of the vertical elastic on the plain A.W, and the MEAW without tip back, the great stress was observed on the lateral incisor area, but on the MEAW with tip back, the moderate stress was observed on the anterior area and molar area. 3. In case of the C III elastic on plain A.W., the stress was concentrated on the anterior area hanged by elastic but on the MEAW without tip back, the stress was transmitted equally from the anterior area to the posterior teeth area. On the MEAW with tip back, the great stress was observed on the anterior and molar area. 4. In case of the C III elastic on the plain A.W., the stress was concentrated on the posterior area hanged by elastic but on the MEAW without tip back, the stress was transmitted equally from the posterior area to the anterior area. On the MEAW with tip back, the great stress was observed on the posterior area and the moderate stress was observed on the anterior area.

  • PDF

Three-dimensional analysis of tooth movement in Class II malocclusion treatment using arch wire with continuous tip-back bends and intermaxillary elastics

  • Lee, Ji-Yea;Choi, Sung-Kwon;Kwon, Tae-Hoon;Kang, Kyung-Hwa;Kim, Sang-Cheol
    • 대한치과교정학회지
    • /
    • 제49권6호
    • /
    • pp.349-359
    • /
    • 2019
  • Objective: The aim of this study was to analyze three-dimensional (3D) changes in maxillary dentition in Class II malocclusion treatment using arch wire with continuous tip-back bends or compensating curve, together with intermaxillary elastics by superimposing 3D virtual models. Methods: The subjects were 20 patients (2 men and 18 women; mean age 20 years 7 months ${\pm}$ 3 years 9 months) with Class II malocclusion treated using $0.016{\times}0.022-inch$ multiloop edgewise arch wire with continuous tip-back bends or titanium molybdenum alloy ideal arch wire with compensating curve, together with intermaxillary elastics. Linear and angular measurements were performed to investigate maxillary teeth displacement by superimposing pre- and post-treatment 3D virtual models using Rapidform 2006 and analyzing the results using paired t-tests. Results: There were posterior displacement of maxillary teeth (p < 0.01) with distal crown tipping of canine, second premolar and first molar (p < 0.05), expansion of maxillary arch (p < 0.05) with buccoversion of second premolar and first molar (p < 0.01), and distal-in rotation of first molar (p < 0.01). Reduced angular difference between anterior and posterior occlusal planes (p < 0.001), with extrusion of anterior teeth (p < 0.05) and intrusion of second premolar and first molar (p < 0.001) was observed. Conclusions: Class II treatment using an arch wire with continuous tip-back bends or a compensating curve, together with intermaxillary elastics, could retract and expand maxillary dentition, and reduce occlusal curvature. These results will help clinicians in understanding the mechanism of this Class II treatment.