• 한국정밀공학회지
• /
• 제27권8호
• /
• pp.76-83
• /
• 2010

Metallic sandwich panels with pyramidal truss structures are high-stiffness and high-strength materials with low weight. In particular, bulk structures have enough space for additional multi-functionalities. In this work, in order to fabricate 3-D structures efficiently, Layered Manufacturing Method (LMM) which was composed of three steps, including crimping process, stacking process and bonding process using rapid infrared brazing, was proposed. The joining time was drastically reduced by employing infrared brazing of which heating rate and cooling rate were faster than those of conventional furnace brazing. By controlling the initial cooling rate slowly, the bonding strength was improved up to the level of strength by conventional vacuum brazing. The observation of infrared brazed specimens by optical microscope and SEM showed no defect on the joining sections. The experiments of 1-layered pyramidal structures and 2-layered pyramidal structures subject to 3-point bending were conducted to determine structural advantages of multilayered structures. From the results, the multi-layered structure has superior mechanical properties to the single-layered structure.

• 한국조경학회지
• /
• 제25권4호
• /
• pp.171-183
• /
• 1998

The purpose of this study was to analyze urban greenspace area and vegetation structure by land use types for both Chuncheon and Kangleung. Natural and agricultural lands were predominant in the study cites, as 75-80% of total area. Residential lands accounted for about 10%, and commercial and industrial lands(including transportation), 5-10%. Only 10-20% of urban residential and commercial area was covered with greenspace. Woody plant cover was 12-13%, and tree density was 1.5 trees/100$m^2$ for urban lands(all land use types except natural land) in both cities. The tree-age structure was largely characterized by young, growing tree population, and species diversity within a diameter class decreases as the diameter classes get larger. Urban lands of both cities had quite a similar species composition of woody plants (similarity index of 0.65). Street trees in Chuncheon were intensively pruned annually to protect the above ground utility lines. Some strategies were explored to solve problems found in the existing greenspace structures. They included increase of biomass and greenspace area through minimization of unnecessary impervious surfaces, creation of multilayered and multiaged vegetation structures, relocation of above ground utility lines and avoidance of intensive tree pruning, and establishment of greenspace proximity and connectivity.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.134.1-134.1
• /
• 2017

In this study, we propose a new scaffold fabrication method, "direct electro-hydrodynamic jet process," using the initial jet of an electrospinning process and ethanol media as a target. The fabricated threedimensional (3D) fibrous structure was configured with multilayered microsized struts consisting of randomly entangled micro/nanofibrous architecture, similar to that of native extracellular matrixes. The fabrication of the structure was highly dependent on various processing parameters, such as the surface tension of the target media, and the flow rate and weight fraction of the polymer solution. As a tissue regenerative material, the 3D fibrous scaffold was cultured with preosteoblasts to observe the initial cellular activities in comparison with a solid-freeform fabricated 3D scaffold sharing a similar structural geometry. The cell-culture results showed that the newly developed scaffold provided outstanding microcellular environmental conditions to the seeded cells (about 3.5-fold better initial cell attachment and 2.1-fold better cell proliferation).

• 대한기계학회논문집A
• /
• 제20권4호
• /
• pp.1133-1145
• /
• 1996

A method is proposed to predict the deformed shape of the structure subjected to the unknown external loads using the signal from the piezoceramic sensors. Such a shape estimation is based on the linear relationship between the deformation of structure and the signal from sensor, which is calculated using finite element method. The deformed shape is, then calculated using the linear matrix and the signals from the piezoceramic sensors attached to the structures. For the purpose, a structural analysis program is developed using a multi-layerd finite element of 8 nodes with 3 displacement and one voltage degrees of freedom at each node. The multiple layers with the different material properties can be layered within the element. The incompatible mode with the element is found to be crucial to catch the bending behavior accurately. The accuracy of the program is, then, verified by being compared with the experimental results performed by Crawley. The proposed shape estimation method is also verified for the different loads and sensor size. It is shown that the results of shape estimation method using the linear matrix well predicts the deflections compared with those of finite element method.

• 마이크로전자및패키징학회지
• /
• 제6권1호
• /
• pp.31-37
• /
• 1999

본 연구에서는 집적회로의 배선공정에 적용될 무전해도금된 Cu박막의 열적 특성과 접착특성에 대하여 고찰하였다. 시편은 Si 기판에 MOCVD법으로 TaN 확산방지막을 증착시킨 후 그 위에 무전해도금법으로 Cu 막을 증착시켜 Cu/TaN/Si 구조의 다층박막을 제조하였다. 이렇게 제조된 Cu/TaN/Si 시편을 수소와 Ar 분위기에서 각각 열처리시킨 후 열처리온도에 따른 비저항을 측정함으로써 Cu박막의 열적 안정성을 분석하였다. Cu박막과 TaN확산방지막과의 접착특성을 분석하기 위하여 scratch test를 사용하였으며, TaN 확산방지막에 대한 무전해도금된 Cu배선막의 접착력은 일반적인 Thermal evaporation과 Sputturing 방법으로 증착된 Cu 박막의 경우와 비교함으로써 평가되었다. TaN 박막에 대한 Cu박막의 접착성을 평가하기 위해 scratch test를 행한 결과 무전해도금된 Cu박막의 경우 다른 방법으로 증착된 Cu 박막과 비슷한 접착특성을 나타내었으며, acoustic emission분석과 microscope 관찰 결과 sputtering이나 evaporation 방법으로 증착된 Cu박막 보다 무전해도금된 Cu박막이 상대 적으로 우수한 접착력을 나타내었다.

• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.213-224
• /
• 2008

트럭 축하중에 의한 도로포장체의 응력과 변형은 대부분 다층 탄성 이론에 의해 예측된다. 대부분의 다층 탄성 이론에 의한 이론적 계산값이 연성 포장 재료의 점탄성적 거동특성, 동적 트럭 축하중, 비균등 타이어 접지압 및 형상등을 해석에 고려하지 못하므로, 계측값에 비해 매우 작은 값을 예측하므로서 도로 포장 두께설계가 과소 설계될 우려가 크다. 이와 같은 도로 포장체 구조해석시 이용되는 중요한 변동요소를 포장 재료의 물성 모델 측면, 비균등 접지압 및 형상 측면, 동적 유한요소해석 측면에서 분석하여 이용 가능한 모델을 본 논문에서 제안하였다. 경계조건 및 민감도 분석을 수행을 통한 효과적인 3차원 연성포장의 유한요소해석모델을 결정하는 방법론을 제안하였으며, 최적 유한요소모델 분석결과와 현장에서 취득한 결과와의 상호비교를 통하여 모델의 유의성을 검증하였으며, 동적 접지하중조건, 점탄성물성 모델 등을 3차원 유한요소 모델에 접목하고, 최적 경계조건을 결정하였다.

• 한국광학회지
• /
• 제27권4호
• /
• pp.143-150
• /
• 2016

분광광도계로 측정된 반사율 데이터를 활용하여 다층박막 각 층의 두께를 푸리에 변환 방법으로 결정하였다. 이를 위하여 이론적인 3층 다층박막 반사율 데이터를 생성하고 자체 작성한 Matlab 프로그램으로 델타함수의 피크 발생위치로부터 각 층의 두께를 결정하였으며, 박막의 광학적 두께가 730 nm 이상이 되는 경우 결정된 두께 오차는 1.0% 이하임을 알 수 있었다. 이 방법을 사용하여 바 코팅 방법으로 제작된 PI-(얇은 $SiO_2$)-PI 다층박막의 두께를 결정하고 그 결과를 SEM 측정결과와 비교하였다. 본 두께측정 방법은 각 층의 굴절률과 박막의 순서를 미리 인지하고 있어야 하는 단점이 있으나, 비파괴적인 방법으로 빠르게 다층 박막의 두께 분포를 결정할 수 있는 방법임을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.163-163
• /
• 2000

In this research, we used the ion irradiation technique which has an advantae in improving intentionally the properties of surface and interface in a non-equilibrium, instead of the conventional annealing method which has been known to improve the material properties in the equilibrium stat. Cu/Co multilayered films were prepared on SiN4/SiO2/Si substrates by the electron-beam evaporation for the Co layers and the thermal evaporation for the Cu layers in a high vacuum. The ion irradiation with a 80keV Ar+ was carried out at various ion doses in a high vacuum. Hysteresis loops of the films were investigated by magneto-optical polar Kerr spectroscopy at various experimental conditions. The change of atomic structure of the films before and after the ion irradiation was studied by glancing angle x-ray diffraction, and the intermixing between Co and Cu sublayers was confirmed by Rutherford backscattering spectroscopy. The surface roughness and magneto-resistance were measured by atomic force microscopy and with a four-point probe system, respectively. During the magneto-resistance measurement, we changed temperature and the direction of magnetization. From the results of experiments, we found that the change at the interfaces of the Cu/Co multilayered film induced by ion irradiation cause the change of magnetic properties. According to the change in hysteresis loop, the surface inplane component of magnetic easy axis was isotropic before the ion irradiation, but became anisotropic upon irradiation. It was confirmed that this change influences the axial behavior of magneto-resistance. Especially, the magneto-resistance varied in accordance with an external magnetic field and the direction of current, which means that magneto-resistance also shows the uniaxial behavior.

• 한국조경학회지
• /
• 제31권2호
• /
• pp.12-27
• /
• 2003

The purpose of this study is to look for an environmental design method based on open narrative structure, and to promote various experiences and interpretations of space through user's engagements. That is to say, the designer does not lead specific events through separate Boning but using the continuous open composition users are provided with margins for their imaginations. Spatial formulation through open narrative structure gives us various thoughts and it plays an important role in making a sequential space. Like an abstract painting, it is a complex story making or arranging a montage of images containing stories that elicit the reader's engagement through diverse interpretations. Like this, open composition exists in an ambiguous state and it is possible to interpret unfinished‘evolving work’within it. Utilizing open narrative structure, this study attempts to apply the idea of sequencing and open composition in the case of designing Arirang Culture Park. Open composition should induce various engagements by users and could be a medium which organically connects nature, culture and people. The spatial strategies of‘ambiguity’ and‘transparency’are like a bundle of complex and heterogeneous factors. Finally, the study focuses on the ‘integration’of the main ideas that compose multilayered space. ‘Voidness’and‘thickening’are also used for spatial strategies in open narrative structure. As alternative plans for undecided programs of the space, the voidness can be a strategic design program with flexibility about changes of futures. Also, thickening can be a strategic design program for functional reinforcement of the space, for the dramatic effects and for the generation of incidental events. Although both voidness and thickening seem paradoxical, we can see they are similar in the way that both focus on various spatial uses and by how they do not function as one-to-one correspondence, but as multiple correspondences. Therefore, open narrative structure is possible to apply in designing space and it can be an alternative design strategy for inducing multiple interpretations of space.

• 대한전자공학회논문지TC
• /
• 제39권11호
• /
• pp.34-39
• /
• 2002

본 논문에서는 마이크로스트립 전송선로의 유전체 기판(substrate) 내에 삽입된 EGP(Elevated Ground Plane)와 비아를 이용하는 소형의 새로운 포토닉 밴드갭(PBG：Photonic Bandgap) 구조를 제안였하고, 세라믹 기판에 적용된 최적구조를 설계하였다. 해석 결과, 제안된 새로운 PBG 구조는 기존의 평면 PBG 구조에 비해서 크기가 52.5 % 축소되었고 대역폭은 45 % 증가하였다. 그리고 접지면 식각 다층 PBG 구조에 비해서는 크기가 32 % 감소하였고 첨예도(sharpness)가 향상되었으며 차단주파수 이상에서 40 GHz까지 전력손실이 8 dB 이상 개선되었다. 따라서 본 논문에서 제안된 PBG 구조는 대역 저지 또는 저역통과 여파기로 사용할 수 있으며, 이러한 여파기 특성은 경박 단소화된 마이크로파 대역 집적회로나 모듈 개발에 효과적으로 활용될 수 있으리라 기대된다.