• Kyungpook Mathematical Journal
• /
• 제45권2호
• /
• pp.221-230
• /
• 2005

In this paper, we define a multifunction $F:X{\rightarrow}Y$ to be upper (lower) Z -supercontinuous if $F^{+}(V)(F^{-}(V))$ is z-open in X for every open set V of Y. We obtain some characterizations and several properties concerning upper (lower) Z-supercontinuous multifunctions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.842-847
• /
• 2005

This paper proposes a novel real-time EMG pattern recognition for the control of a multifunction myoelectric hand from four channel EMG signals. To cope with the nonstationary signal property of the EMG, features are extracted by wavelet packet transform. For dimensionality reduction and nonlinear mapping of the features, we also propose a linear-nonlinear feature projection composed of PCA and SOFM. The dimensionality reduction by PCA simplifies the structure of the classifier, and reduces processing time for the pattern recognition. The nonlinear mapping by SOFM transforms the PCA-reduced features to a new feature space with high class separability. Finally a multilayer neural network is employed as the pattern classifier. We implement a real-time control system for a multifunction virtual hand. From experimental results, we show that all processes, including virtual hand control, are completed within 125 msec, and the proposed method is applicable to real-time myoelectric hand control without an operation time delay.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2004년도 춘계 종합학술대회 논문집
• /
• pp.323-329
• /
• 2004

다기능 단말기 보급이 확산됨에 따라 무선인터넷 사업에서 이를 기반으로 새로운 사업모델이 개발되고 있다. 다기능 단말기는 VOD, AOD 등의 멀티미디어 서비스와 블루투스, 무선랜을 이용한 근거리 무선인터넷 서비스를 가능하게 하고 있다. 새로운 사업모델로 다기능 단말기를 이용한 홈 네트워킹 서비스가 개발되고 있다. 본 논문은 흠 네트워크 제어기와 연동하는 WIPI 기반 홈 네트워크 어플리케이션에 관한 것이다. 개발된 홈 네트워크 어플리케이션은 댁내 장비를 제어하고 웹 카메라와 연동하여 댁내의 보안상태를 확인할 수 있는 기능을 제공한다. GigBee, RFID 등의 PAN장치를 내장한 다기능 단말기가 개발됨에 따라 PAN을 이용한 다양한 서비스가 개발될 것이다.

• ETRI Journal
• /
• 제28권3호
• /
• pp.401-404
• /
• 2006

A new log-domain first-order multifunction filter is proposed in this letter. The proposed filter is systematically derived using the state-space synthesis procedure from a corresponding block diagram. It provides low-pass (LP), high-pass (HP), and all-pass (AP) responses simultaneously for a single input signal. The filter circuit has a very simple structure since it uses only bipolar junction transistors (BJTs) and a grounded capacitor. It can be electronically tuned by changing an external current. The filter has a greater bandwidth due to its inherent current-mode and log-domain operations. PSPICE simulations are given to confirm the theoretical analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2775-2777
• /
• 2003

In this paper we studied the fittest method of effective production line for multifunction welder. So, that can be good productivity. Because this method is simpler than present method and it don't need to change on production line for new product.

• ETRI Journal
• /
• 제35권3호
• /
• pp.378-385
• /
• 2013

An S-band multifunction chip with a simple interface for an active phased array base station antenna for next-generation mobile communications is designed and fabricated using commercial 0.5-${\mu}m$ GaAs pHEMT technology. To reduce the cost of the module assembly and to reduce the number of chip interfaces for a compact transmit/receive module, a digital serial-to-parallel converter and an active bias circuit are integrated into the designed chip. The chip can be controlled and driven using only five interfaces. With 6-bit phase shifting and 6-bit attenuation, it provides a wideband performance employing a shunt-feedback technique for amplifiers. With a compact size of 16 $mm^2$ ($4mm{\times}4mm$), the proposed chip exhibits a gain of 26 dB, a P1dB of 12 dBm, and a noise figure of 3.5 dB over a wide frequency range of 1.8 GHz to 3.2 GHz.

• 한국산학기술학회논문지
• /
• 제13권4호
• /
• pp.1511-1517
• /
• 2012

진공유리 배기공정을 위해 진공챔버나 진공튜브를 이용하는데 챔버 혹은 튜브 내부 전체를 진공으로 만들기 위한 시간과 경비가 과도하게 요구된다. 이러한 문제점을 해결하기 위해 상압에서 진공배기 및 초음파 접합이 동시에 가능한 복합기를 개발하고자 하였는데, 이 경우 진동자인 피에조 온도가 과도하게 상승하여 복합기의 냉각을 최적화할 필요성이 대두되었다. 따라서, 본 연구에서는 수치해석 및 실험을 통해 자연대류 및 강제대류 냉각방식의 효과를 규명하였고 이를 통해 진공 배기 및 초음파 접합 복합기의 냉각 성능을 최적화하였다.

• 패션비즈니스
• /
• 제6권4호
• /
• pp.46-61
• /
• 2002

The purpose of this study was to analyze critical needs and demands for the multifunctional traveler's jacket and to develop design prototypes based on the findings from the analysis. A self-report questionnaire with the stimuli was applied. Total 163 travelers were purposively sampled for the survey and the data were analyzed quantitatively as well as qualitatively. The results were as follows: 1. The respondents were divided into three groups - "digital-functionality-needs group", "non-digitalfunctionality-needs group", "no-need group", according to their preference and needs for the multifunctional traveler's jacket. 2. The three groups were analyzed (1) to have meaningful differences in experiencing inconvenience in their traveling, (2) to have statistically significant differences in their needs for the multifunctional traveler's jacket, (3) while some imperative consensus in their needs were found in part. 3. Based on the findings of the analysis mentioned above, three design prototypes were developed and visualized with conclusion.

• ETRI Journal
• /
• 제46권2호
• /
• pp.323-332
• /
• 2024

Receiver and transmitter monolithic microwave integrated circuit (MMIC) multifunction chips (MFCs) for active phased-array antennas for Ka-band satellite communication (SATCOM) terminals have been designed and fabricated using a 0.15-㎛ GaAs pseudomorphic high-electron mobility transistor (pHEMT) process. The MFCs consist of four-channel radio frequency (RF) paths and a 4:1 combiner. Each channel provides several functions such as signal amplification, 6-bit phase shifting, and 5-bit attenuation with a 44-bit serial-to-parallel converter (SPC). RF pads are implemented on the bottom side of the chip to remove the parasitic inductance induced by wire bonding. The area of the fabricated chips is 5.2 mm × 4.2 mm. The receiver chip exhibits a gain of 18 dB and a noise figure of 2.0 dB over a frequency range from 17 GHz to 21 GHz with a low direct current (DC) power of 0.36 W. The transmitter chip provides a gain of 20 dB and a 1-dB gain compression point (P1dB) of 18.4 dBm over a frequency range from 28 GHz to 31 GHz with a low DC power of 0.85 W. The P1dB can be increased to 20.6 dBm at a higher bias of +4.5 V.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1797-1801
• /
• 2004

In this paper we show the hardware testbed and software simulator of multi function array radar (MFAR). The hardware MFAR is simple and flexible hardware to implement various radar beamforming and detecting algorithms. To overcome the limitation of hardware MFAR, the software simulator is proposed. User can simulate radar under the various environment conditions adjusting the parameter of simulator. User can set environment of radar, such as the location and velocity of target, jammer and the terrain clutter. The radar use various probing pulses and supports two operation mode, surveillance and tracking mode.