• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.859-864
• /
• 2001

In a vacuum circuit breaker mechanism, a spring-actuated linkage system is used to satisfy the desired opening and closing characteristics of electric contacts. Because the opening and the closing dynamics of electric contacts is determined by such a linkage system, the stiffness, free length and attachment points of a spring become the important design parameters. In this paper, based on the dynamic model of the circuit breaker using a multibody dynamic program ADAMS, a optimal design procedure of determining the spring design parameters is presented. The proposed procedure is applied to the design of an opening spring for satisfying the specified opening characteristics.

• 한국해양공학회지
• /
• 제35권3호
• /
• pp.229-237
• /
• 2021

A numerical hydrodynamic performance analysis of the pitch-type multibody wave energy converter (WEC) is carried out based on both linear potential flow theory and computational fluid dynamics (CFD) in the unidirectional wave condition. In the present study, Salter's duck (rotor) is chosen for the analysis. The basic concept of the WEC rotor, which nods when the pressure-induced motions are in phase, is that it converts the kinetic and potential energies of the wave into rotational mechanical energy with the proper power-take-off system. This energy is converted to useful electric energy. The analysis is carried out using three WEC rotors. A multibody analysis using linear potential flow theory is performed using WAMIT (three-dimensional diffraction/radiation potential analysis program), and a CFD analysis is performed by placing three WEC rotors in a numerical wave tank. In particular, the spacing between the three rotors is set to 0.8, 1, and 1.2 times the rotor width, and the hydrodynamic interaction between adjacent rotors is checked. Finally, it is confirmed that the dynamic performance of the rotors slightly changes, but the difference due to the spacing is not noticeable. In addition, the CFD analysis shows a lateral flow phenomenon that cannot be confirmed by linear potential theory, and it is confirmed that the CFD analysis is necessary for the motion analysis of the rotor.

• 한국산업융합학회 논문집
• /
• 제11권2호
• /
• pp.71-82
• /
• 2008

In this study, 3 dimensional non-linear race car vehicle model including Chassis, steering and suspension systems were modeled by using Multi-Body Dynamics Simulation Program, DADS 9.5(Dynamic Analysis and Design System),which was used in kinematic and dynamic analysis. A full race car vehicle dynamics model using DADS program was presented and analysis was carried out to estimate the handling characteristics that may be very useful to design a race car in early design stage. The simulation of vehicle handling behavior for step steering input was simulated and compared with different design parameters: torsional stiffness of the front and rear anti roll bars, the motion ratio of the front and rear suspension system, the location of the tie rod joint, in multibody dynamic model. Therefore this simulation model before race car construction in early design step will be helpful for race car designer to save time and limited budget.

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.159-167
• /
• 2003

In this paper, a two-dimensional multibody DADS model of a moving walk is developed to improve the ride quality of a moving walk system. The proposed DADS model is able to estimate the longitudinal acceleration of moving walk system, which is the more sensitive and important than other accelerations. To show the validity of the developed model, the longitudinal accelerations of pallet obtained from the computer simulations are compared to the experimental data in frequency domain. Then, the factorial design technique is applied to determine the main design factor and to improve the ride quality. The change of the spring compression in the lower part of the tension generating system improved the ride quality of the moving walk system.

• 한국전산구조공학회논문집
• /
• 제26권4호
• /
• pp.247-254
• /
• 2013

본 논문에서는 해상 시추작업을 위한 heave compensation system의 시뮬레이션 모델을 개발하였다. 우선 시뮬레이션을 위하여, 다물체계 동역학 커널을 개발하였다. 다물체계 동역학 커널은 입력 받은 heave compensation system 시뮬레이션 모델의 운동학적 정보를 이용하여 recursive Newton-Euler formulation 방법을 기반으로 운동방정식을 자동으로 구성하고, 수치적으로 해를 계산하는 기능을 한다. 그리고 해상 시추선에 작용하는 외력을 계산하기 위하여 유체 정역학적 힘과 유체 동역학적 힘을 계산하는 모듈을 개발하였다. 이와 같이 개발한 커널과 모듈들을 적용하여 해상 시추선의 hoisting system 동적거동 해석을 수행하고, 관절에서의 구속력을 계산하였다.

• 대한기계학회논문집A
• /
• 제40권2호
• /
• pp.229-236
• /
• 2016

본 연구에서는 자주박격포의 다물체동역학 모델을 만든 뒤, 포탄의 탄도학을 고려하여 시뮬레이션 하였다. 자주박격포 모델은 박격포 모델 및 차량 모델로 구성하였으며, 상용 다물체 해석 프로그램인 RecurDyn 을 사용하였다. 차량 모델은 6 자유도 강체플랫폼으로 모델링 하였으며, 박격포 발사 직후의 움직임에는 강내탄도학을 적용하였다. 강내탄도학 해석의 결과를 바탕으로, 포신을 떠난 후의 강외탄도 해석을 수행하였다. 몬테카를로 기법을 활용한 반복 해석으로 발사각과 차량 동특성에 의한 변동이 고려된 탄착점의 분산도를 구하여 사격정확도를 제시하였다.

• 대한기계학회논문집A
• /
• 제35권12호
• /
• pp.1579-1584
• /
• 2011

본 논문에서는 파도의 에너지를 전기에너지로 변환하는 파력발전시스템에 대해 다루며, 발전기 및 12개의 암을 가진 가동물체형 파력발전기를 기구학적 구속조건을 이용하여 다물체 동역학 모델링 하였다. 새롭게 제안하는 파력발전기의 기어 메커니즘과 구속방정식 및 전달되는 힘요소에 대해 동역학적으로 모델링하였다. 파력은 시간영역에서 모리슨 방정식을 이용하여 수치적으로 계산하여 모델에 적용하였다. 시스템 거동해석을 위해 상용 다물체동역학 해석프로그램인 MSC/ADAMS를 이용하였다. 파력발전시스템의 파도에 대한 안정성을 검토하고 동적 거동 특성을 분석하였다. 하중에 따라 거동 특성을 분석한 결과 Yaw 운동은 상대적으로 적게 나타났으며 파고 1 m 이상일 경우 충분한 운동에너지가 발생함을 알 수 있다.

• 한국자동차공학회논문집
• /
• 제4권5호
• /
• pp.109-118
• /
• 1996

An analysis of handling characteristics of a vehicle is performed for step and pulse steering input, which may be very useful in suspension design stage. Many developed computer programs for vehicle dynamics require test data of compliance effects for proto type car. Therefore, these programs are not suitable for automobile development stage. Using the raw design data of suspension and steering system, we analyze the vehicle behavior for step and pulse steering input with commercial multibody dynamics program, ADAMS. Simulated results are in good agreement with vehicle test results. Vehicle handling characteristics parameters which are very useful in automobile suspension design are evaluated from the analysis.

• 대한기계학회논문집A
• /
• 제35권7호
• /
• pp.723-728
• /
• 2011

진공회로차단기의 성능이 스프링조작기에 많이 좌우되기 때문에, 스프링조작기의 해석이 요구된다. 본 연구에서는 스프링의 특성시험을 먼저 수행한 후, 시험결과를 RecurDyn 프로그램을 이용한 컴퓨터시뮬레이션 스프링모델링에 이용하였다. 개발된 진공회로차단기의 다물체동역학 모델을 이용하여 차단기의 스템변위와 샤프트 회전각에 대한 시뮬레이션 하였으며, 시뮬레이션 결과를 시험과 비교 검증하였다. 검증된 다물체동역학 모델을 사용하여 차단속도를 증가시키기 위한 캠의 최적윤곽을 얻었다.

• Journal of Mechanical Science and Technology
• /
• 제16권6호
• /
• pp.810-818
• /
• 2002

When the contribution of lightweight components to the total energy of a system is small, tole inertia effects are sometimes ignored by replacing them to massless links. For example, a revolute-spherical massless link generates two kinematic constraint equations between adjacent bodies and allows four relative degrees of freedom. In this paper, to implement a massless link systematically in a computer program using the velocity transformation technique, the velocity transformation matrix of massless links is derived and numerically implemented. The velocity transformation matrix for a revolute-spherical massless link and a revolute-universal massless link are appeared as a 6$\times$4 matrix and a 6$\times$3 matrix, respectively. A massless link model in a suspension composite joint transmitting external forces is also developed and the numerical efficiency of the proposed model is compared to a conventional multibody model. For a massless link transmitting external forces, forces acting on links are resolved and transmitted to the attached points with a quasi-static assumption. Numerical examples are presented to verify the formulation.