• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.6
• /
• pp.747-752
• /
• 2013

Recently, virtual test laboratory techniques have been widely used to reduce vehicle development costs and time. In this study, a virtual durability test process using multibody dynamics simulation and fatigue simulation is proposed. The flexible multibody model of the front half of a car suspension is solved using road loads that are measured from durability test courses such as a Belgian road. To verify the simulation results, the measured loads of components and simulation results are collated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4733-4738
• /
• 2013

This paper proposes a method to obtain the dynamic equilibrium configuration of a constrained mechanical system by using multibody dynamic analysis. Dynamic equilibrium equations with independent coordinates are derived from the time-dependent constraint equations and dynamic equations of a multibody system. The Newton-Raphson method is used to find numerical solutions for nonlinear algebraic equations that are composed of the dynamic equilibrium and constraint equations. The proposed method is applied to obtain the dynamic equilibrium configuration of a speed governor, and the results are verified on the basis of the results from conventional dynamic analysis. Furthermore, vertical displacements at equilibrium configuration, which varied with the rotational velocity of the speed governor, are calculated, and design parameter analysis of the equilibrium configuration is presented.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.5
• /
• pp.375-380
• /
• 2012

In this study, dynamic load and dynamic contact force between a building block and wire ropes of a goliath crane are calculated during lifting or turn-over of a building block for the design of an optimal lug arrangement system. In addition, a multibody dynamics kernel for implementing the system were developed. In the multibody dynamics kernel, the equations of motion are constructed using recursive formulation. To evaluate the applicability of the developed kernels, the interferences and dynamic contact force between the building block and wire ropes were calculated and then the hull structural analysis for the block was performed using the calculation result.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.12
• /
• pp.2298-2305
• /
• 1992

To obtain the convenient solution of the multibody dynamic systems composed of flexible beams, linear finite element technique is adopted and the nodal coordinates are interpolated in the global inertia frame. Mass matrix becomes an extremely simple constant matrix and the force vector also becomes extremely simple because Coriolis acceleration and centrifugal force are not required. And the elastic force is also simply computed from the moving frame attached to the material. To solve the global differential algebraic euation. an ODE technique is adopted after Lagrange multiplier is computed by the accelerated iterative technique, and the time demanding procedures such as Newton-Raphson iterations and decomposition of the big matrix are not required. The accuracy of the present solution is checked by a well-known example problem.

• Journal of the Korean Society for Railway
• /
• v.17 no.5
• /
• pp.321-327
• /
• 2014

In this paper, linear dynamic equations are derived from nonlinear dynamic equations of constrained multibody systems using the QR decomposition method. The derived linear equations are applied to a railway vehicle bogie. The vibration characteristics of the railway vehicle are investigated by calculating the natural mode and transfer function of the bogie frame in relation to rail-roughness input. The main modes of the bogie were found below 35Hz, and the local modes above 198Hz. The magnitude of the vertical transfer function varied with the forward velocity due to vertical and pitch modes, which were influenced by the forward velocity. The magnitude of the lateral transfer function was negligibly small, and the mode in the longitudinal direction was excited for longitudinal transfer function regardless of the forward velocity.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.3
• /
• pp.229-237
• /
• 2021

A numerical hydrodynamic performance analysis of the pitch-type multibody wave energy converter (WEC) is carried out based on both linear potential flow theory and computational fluid dynamics (CFD) in the unidirectional wave condition. In the present study, Salter's duck (rotor) is chosen for the analysis. The basic concept of the WEC rotor, which nods when the pressure-induced motions are in phase, is that it converts the kinetic and potential energies of the wave into rotational mechanical energy with the proper power-take-off system. This energy is converted to useful electric energy. The analysis is carried out using three WEC rotors. A multibody analysis using linear potential flow theory is performed using WAMIT (three-dimensional diffraction/radiation potential analysis program), and a CFD analysis is performed by placing three WEC rotors in a numerical wave tank. In particular, the spacing between the three rotors is set to 0.8, 1, and 1.2 times the rotor width, and the hydrodynamic interaction between adjacent rotors is checked. Finally, it is confirmed that the dynamic performance of the rotors slightly changes, but the difference due to the spacing is not noticeable. In addition, the CFD analysis shows a lateral flow phenomenon that cannot be confirmed by linear potential theory, and it is confirmed that the CFD analysis is necessary for the motion analysis of the rotor.

• Structural Engineering and Mechanics
• /
• v.11 no.2
• /
• pp.133-149
• /
• 2001

A high-fidelity model of a tracked vehicle traversing a flexible ground terrain with a varying profile is presented here. In this work, we employed a recursive formulation to model the track subsystem. This method yields a minimal set of coordinates and hence, computationally more efficient than conventional approaches. Also, in the vehicle subsystem, the undercarriage frame is assumed to be connected to the chassis by a revolute joint and a spring-damper unit. This increase in system mobility makes the model more realistic. To capture the vehicle-ground interaction, a Winkler-type foundation with springs-dampers is used. Simulation runs of the integrated tracked vehicle system for vibrations for four varying ground profiles are provided.

• Steel and Composite Structures
• /
• v.37 no.4
• /
• pp.493-501
• /
• 2020

The paper describes an optimization method based on the mathematical model of interaction within multibody 'bridge-track-cars" dynamic system. The interaction is connected with considerable dynamic phenomena influenced by high traffic speed (up to 400 km/h) on high-speed railroads. The trend analysis of a structure is necessary to determine the direction and resource of optimizing the system. Thus, scientific methods of decision-making process are necessary. The process requires a great amount of information analysis dealing with behavior and changes of the "bridge-track-cars system" that consists of mechanisms and structures, including transitions. The paper shows the algorithm of multi-criteria optimization that can essentially reduce weight of a bridge superstructure using big data analysis. This reduction is carried out in accordance with the constraints that have to be satisfied in any case. Optimization of real steel-concrete beam is exemplified. It demonstrates possibility of measures that are offered by the algorithm.

• Journal of Industrial Technology
• /
• v.21 no.B
• /
• pp.273-280
• /
• 2001

In this study, a driver model based on the lead-lag controller for stable maneuver of a highly nonlinear, multi-dimensional, numerically stiff multibody vehicle model according to the various handling test requirements such as steady-state cornering, double lange change, etc. is presented The lead-lag controller is developed with lead and lag compensation. which use the transfer function with cross-over frequency by frequency response method. The proposed driver model is applied to a vehicle model in steady-state and slalom maneuver to verify its effectiveness and validity. The results show that the proposed path control strategy is excellent both in pursuing the desired course and stability of the vehicle.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.3
• /
• pp.11-17
• /
• 1998

In this study, a procedure is presented for the dynamic analysis of a multibody tracked vehicle system. the planner tracked vehicle model used in this investigation is assumed to consist of two kinematically decoupled subsystems, i.e., the chassis subsys- tem and track sub-system. The chassis subsystem includes the chassis frame, sprocket, idler and rollers, while the track subsystem is represented as a closed kinematic chain consisting of rigid links interconnected by revolute joints. The recursive kinematic and dynamic formulation module of the vehicle will be developed.