• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.2
• /
• pp.225-234
• /
• 2018

A Multibeam Echo Sounder (MBES) is commonly used for rapid seafloor mapping. We herein present a time-domain integrated system simulation technique for MBES development. The Modeling and Simulation (M&S) modules consist of four parts: sensor array signal transmission, propagation and backscattering modeling in the ocean environment, beamforming of the received signals, and image processing. Also, the simulation employs a ray-theory-based algorithm to correct the reconstructed bathymetry, which has errors due to the refraction caused by the vertical sound velocity profile. The developed M&S technique enables design parameter verification and system parameter optimization for MBES. The framework of this technique can also be potentially used to characterize the seabed properties. Finally, typical seafloor images are presented and discussed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.3
• /
• pp.308-317
• /
• 2011

A MBES (multibeam echo sounder) survey around Yokji Island, Korea, was conducted to find an effective method for removing error data. Two post-processing software programs, PDS2000 (RESON) and HIPS (CARIS), were used to remove the error data using an interactive editing method and the CUBE algorithm filter. The post-processing with the PDS2000 and HIPS programs, using the interactive editing method, took 120 and 168 hours, respectively, and there was little difference in the seafloor images. The processing time of the PDS2000 and HIPS programs using the CUBE algorithm filter was 36 and 60 hours, respectively. Nevertheless, there was little difference in the seafloor images because of differences in the factor parameters in each of the post-processing programs. Therefore, post-processing using CUBE filtering can save time in data processing and provide consistent results, excluding the subjective decisions of the operator. This method is more effective than other methods for rejecting erroneous multibeam echo sounder data.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.3
• /
• pp.407-412
• /
• 2010

According to the remarkable advances in sonar technology, positioning capabilities and computer processing power we can accurately image and explore the seafloor in hydrography. Especially, Multibeam Echo Sounder can provide nearly perfect coverage of the seafloor with high resolution. Since the mid-1990's, Multibeam Echo Sounders have been used for hydrographic surveying in Korea. In this study, new marine data set as an effective decision-making tool in various fields was proposed by visualizing and combining with Multibeam sonar data and marine spatial data sets such as satellite image and digital nautical chart. The proposed method was tested around the port of PyeongTaek-DangJin in the west coast of Korea. The Visualization and fusion methods are described with various marine data sets with processing. We demonstrated that new data set in marine GIS is useful in safe navigation and port management as an efficient decision-making tool.

• Ocean and Polar Research
• /
• v.28 no.4
• /
• pp.467-473
• /
• 2006

The EM 120, a newly installed multibeam echo sounder on RM Onnuri, has several advantages over the previously installed SeaBeam 2000 in performance and thus data quality. The EM 120 system provides a bottom topographic map with high resolution by (1) increasing the number of beams, (2) increasing the across track swath range, (3) measuring the more accurate sound velocity within the water column, and (4) improving stabilization for pitching, rolling, and yawing of the ship. This study compares EM 120 and SeaBeam 2000 echo sounders in terms of the data quality from the same survey area in the Clarion-Clipperton Zone, NE Pacific. Our result shows that the EM 120 provides more precise topographic data than the SeaBeam 2000. Although overall trends of data, such as topographic direction and relief, are similar for both echo sounders, the water depths measured by the EM 120 are shallower than that of SeaBeam 2000 by 80 to 90 meters.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.330-330
• /
• 2002

The combination of Multi-Beam Echo Sounder swath bathymetry and high-resolution towed Sidescan sonar provides a powerful method of examination about hydrographic survey results. In this paper, we investigate the fast method of 3D bathymetric reconstruction with the Digital Sidescan sonar(Benthos SIS 1500) and Shallow Multi-Beam Echo Sounder(Reson Seabat 8125). The Seabat 8125 is a 455KHz high resolution focused Multibeam echo sounder(MBES) system which measures the relative water depth across a wide swath perpendicular to a vessel's track. The Benthos SIS1500 is a chirp(nominal fq. 200KHz) sonar which map the topographical features & sediment texture of ocean bottom using backscattered amplitude. We generates the very large 3D bathymetric texture mapping model with the Helical System's HHViewer and describes additional benefits of combining MBES and Sidescan Sonar imagery, the removal of geometric distortions in the model and a deterministic sounding noise.

• Korean Journal of Remote Sensing
• /
• v.11 no.3
• /
• pp.129-145
• /
• 1995

SeaBeam2000, a multibeam echo sounder, is a new generation seabed mapping system of which a single swath covers an angular range of -60.deg. to 60.deg. from the vertical direction with 121 beams. It provides high-density and high-quality bathymetric data along with sidescan acoustic data. The purpose of the research is to develop a system for processing multibeam underwater acoustic and bathymetric data using digital signal processing techniques. Recently obtained multibeam echo sounder data covering a survey area in the East Sea of Korea ($37{\circ}$.00'N to $37{\circ}$30'N and $129{\circ}$40'E to $130{\circ}$30'E) are preliminarily processed using the developed system and reproduced in the raster image format as well as three dimensionally visualized form.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.4
• /
• pp.28-39
• /
• 2014

Several studies have been performed globally on the construction of integrated systems that are available for the integrated use of 3D geographic information on terrain and oceans. Research on 3D geographic modeling is also facilitated by the application of Lidar surveying, which enables the highly accurate realization of 3D geographic information for a wide area of land. In addition, a few marine research organizations have been conducting investigations and surveying diverse ocean information for building and applying MGIS(Marine Geographic Information System). However, the construction of integrated geographic information systems for both terrain and oceans has certain limitations resulting from the inconsistency in reference systems and datum levels between two data. Therefore, in this investigation, integrated geospatial information has been realized by using a combined topographical map, after matching the reference systems and datum levels by integration of airborne Lidar data and multi-beam echo sounder data. To verify the accuracy of the integrated geospatial information data, ten randomly selected samples from study areas were selected and analyzed. The results show that the 10 analyzed data samples have an RMSE of 0.46m, which meets the IHO standard(0.5m) for depth accuracy of hydrographic surveys.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.133-141
• /
• 2023

Accurate measurement of seafloor topography plays a crucial role in developing marine industries such as maritime safety, resource exploration, environmental protection, and coastal management. The seafloor topography is constructed using side scan sonar (SSS) and single beam echosounder (SBES) or multibeam echosounder (MBES), which transmit and receive ultrasound waves through a device attached to a marine survey vessel. However, the use of a sonar system is affected by noise pollution areas, and the single beam has a limited scope of application. At the same time, the multibeam is mainly applicable for depth observation. For these reasons, it is difficult to determine the boundaries and areas of seafloor topography. Therefore, this study proposes a method to improve the backscatter data of multibeam echosounder, which has a relationship with the seafloor quality, by using digital image processing to classify the shape of the underwater surface.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.27 no.1
• /
• pp.33-47
• /
• 2022

In this study, distribution of submarine sand ridges in the coastal waters of Korea was surveyed using multibeam echo sounder data, and the topographic characteristics of each region were identified. For this purpose, the DEM (Digital Elevation Model) data was generated using depth data obtained from the Yellow Sea and the South Sea by Korea Hydrographic and Oceanographic Agency, and then applied the TPI (Topographic Position Index) technique to precisely extract the boundary of the sand ridges. As a result, a total of 200 sand ridges distributed in the coastal waters were identified, and the characteristics of each region of the sedimentary sediments were analyzed by performing statistical analysis on the scale (width, length, perimeter, area, height) and shape (width/length ratio, height/width ratio, linear·branch type, exposure·non-exposure type). The results of this study are expected to be used not only for coastal navigational safety, but also for marine naming support, marine aggregate resource identification, and fisheries resource management.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.4
• /
• pp.560-566
• /
• 2010

Port of Samcheonpo, designated as a Trading Port, is constructing New Port for the increase in trade and the requirement of maritime safety is growing. To meet these requirement for maritime safety, hydrographic surveying around south sea area of Samcheonpo using Multibeam Echo Sounder(MBES), DGPS etc was conducted. In this study, major item of hydrographic surveying such as sounding data was acquired and analyzed depth data comparing with vertical uncertainty in the special publication for hydrographic minimum specification published in Feb, 2008 by International Hydrographic Organization. By analyzing the depth data with 3 steps procedure, the port and starboard beam by removing the outskirts of the data processing could improve the efficiency and accuracy. The error of south sea were about 0.2m and the upper central part of the error were within 0.2m. Depth data of the study area are included in the 99% of 1st order and satisfied with a 100% tolerance of special order based on the international hydrograhic survey standard. This study will be a good case to support efficient decision-making for safe navigation, coastal management.