• ETRI Journal
• /
• v.24 no.3
• /
• pp.197-204
• /
• 2002

This paper presents the results of the numerical simulation of a multibeam active phased array antenna for a High Altitude Platform Station (HAPS). The simulation takes into account the random errors caused by the non-identity of the array elements and the inaccuracy of the antenna calibration. The results of our statistical simulation show that the strict requirements on the sidelobe envelope for HAPSs can be met when the amplitude and phase distribution errors are minor, a condition which may be achieved by using digital beamforming.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.125-131
• /
• 2008

A lot of breakwater shall be damaged by typhoon and ocean wave under construction. Construction company shall sign up for onshore & offshore construction insurance regarding disaster. But in case of breakwater it is very difficult to calculate exactly about damaged quantity. In research effective quantity for disaster survey shall be investigated and calculated by multibeam bathymetric survey.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1167-1173
• /
• 2005

In this paper, the use of an antenna array is considered for code timing acquisition of DS-CDMA signals. The probabilities of acquisition are evaluated by applying multiple narrow fixed-beams to the conventional MUSIC acquisition approach in the multiuser environment on the time-varying Rayleigh fading channel. Each fixed-beam for spatial filtering is dedicated to an individual angular sector that is formed by dividing the entire angular domain by the number of antenna elements. The fixed-beams with a capability of interference suppression provide the additional degrees of freedom,. Hence, the multibeam-based MUSIC estimator can be used to synchronize to more users than the conventional MUSIC algorithm for one antenna. The multibeam-based subspace method is evaluated to significantly improve the performance of a single antenna based MUSIC technique in multiuser scenarios.

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.719-738
• /
• 2006

Simrad EM950 multibeam data and surficial sediment grab samples were acquired to correlate backscatter strength with surficial sediment properties in the eastern Yellow Sea which tidal sand ridges are dominantly developed. The study area is divided into the western sand ridge zone characterized by well sorted, fine sandy sediment, and the eastern non-sand ridge zone characterized by poorly sorted, medium sand with some gravels and shell fragments. In spite of minor difference in grain size between two zones, the variations of backscatter strength between two zones are distinct. Multibeam backscatter strength of study area shows good correlation with the grain size of surface sediment as well as the carbonate contents. High occurrence of carbonate shell fragments can increase grain size and bottom roughness. The dominance of higher backscatter strength in the eastern non-sand ridge zone may reflect the effects of coarse grain size and high shell fragments contents.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2003.08a
• /
• pp.109-109
• /
• 2003

• Journal of Satellite, Information and Communications
• /
• v.4 no.2
• /
• pp.20-27
• /
• 2009

In this paper, HAPS operation scenario is proposed to minimize the interference from HAPS user terminal(HUT) to geostationary earth orbit(GEO) satellite receiver. The conventional scenario has been assumed for fully operated situation of HUT. However, all the HUTs could not be fully operated in a real system operation. Therefore, in order to reduce the interference to other systems, multibeam operation scenarios such as time division and adaptive time division methods are proposed and the interference effect of HUT to satellite receiver is evaluated according to various operation rate of HUT.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.365-372
• /
• 2013

The multibeam surveillance radar is a state-of-art of 3D radar technology. It applies the stacked beams realized by a digital beamformer. In this paper, a hybrid compensation technique on elevation angle errors for low elevation angle targets over the sea in multipath radar environments is proposed. The proposed method can be applied to stacked beam radars. Double null algorithm based on maximum likelihood method in 3-D beamspace domain works well unless the phase difference between the two rays(direct and specular path) is close to $0^{\circ}$ and the magnitude of reflection coefficient is close to 0. To overcome these problems, we propose a hybrid compensation technique which uses the selective double null algorithm and the beam-ratio compensation technique for low-elevation errors on a log scale. Results of computer simulation show that the proposed method outperform conventional monopulse method and double null algorithm only under various multipath environments.

• Ocean and Polar Research
• /
• v.35 no.1
• /
• pp.51-61
• /
• 2013

Two surveys were conducted in January 2006 and September 2007 with multibeam echosounder to investigate the dune shape, migration rate, and bedload transport rate using dune-tracking method on an offshore sand ridge at southern Gyeonggi Bay. The migration rates of dunes range from 1.8 $myr^{-1}$) to 56.0 $myr^{-1}$), at the upper northwestern side of sand ridge towards the southwest direction and from the center of the sand ridge towards the northeast direction respectively. Large (i.e. length 10-100 m) dunes show faster migration (0.3-23.4 $myr^{-1}$) ) than very large (i.e. length > 100 m) dunes because larger dunes have required a larger volume of sediments to be displaced. The decreases in dimensions and migration rates of dunes from the center of sand ridge to the lower part of southeastern side on the sand ridge can be ascribed to the decrease of sandy sediments availability, tidal currents with depth, and the coarsening of surface sediments from the crest of the sand ridge to the trough. Bedload transport rates on the basis of migration rates and dune dimensions decrease from 74.5 $m^2yr^{-1}$) at C transect to 35.6 $m^2yr^{-1}$) at R-02 transect.

• Journal of The Korean Astronomical Society
• /
• v.40 no.4
• /
• pp.133-135
• /
• 2007

A survey project of TRAO with the fifteen beam array receiver system is presented. A multibeam array receiver system has been purchased from FCRAO, and is being installed on TRAO 14m telescope. The target region of the survey is from ${\iota}=120^{\circ}{\sim}137^{\circ},\;b=-1^{\circ}{\sim}+ 1^{\circ}$, and velocity resolution would be 1 km/sec after smoothing from the original resolution of $0.64km\;s^{-1}$ in the transition of J = 1-0 of $^{13}CO$. The survey region is a part of the $^{12}CO$ Outer Galaxy Survey(OGS), and would be an extension of the Bell Laboratories $^{13}CO$ Galactic Plane Survey. By combining with the existing $^{12}CO$ database of the Outer Galaxy Survey, we will derive physical properties of identified molecular clouds and will conduct and statistical analysis of the Outer Galalxy molecular clouds. Reduction process and analysis methods will be introduced.

• Journal of Environmental Science International
• /
• v.22 no.5
• /
• pp.543-554
• /
• 2013

Acoustic Doppler Current Profilers (ADCPs) are increasingly popular in the river research and management communities being primarily used for estimation of stream flows. ADCPs capabilities, however, entail additional features that are not fully explored, such as morphological representation of river or reservoir bed based upon multi-beam depth measurements. In addition to flow velocity, ADCP measurements include river bathymetry information through the depth measurements acquired in individual 4 or 5 beams with a given oblique angle. Such sounding capability indicates that multi-beam ADCPs can be utilized as an efficient depth-sounder to be more capable than the conventional single-beam eco-sounders. The paper introduces the post-processing algorithms required to deal with raw ADCP bathymetry measurements including the following aspects: a) correcting the individual beam depths for tilt (pitch and roll); b) filtering outliers using SMART filters; d) transforming the corrected depths into geographical coordinates by UTM conversion; and, e) tag the beam detecting locations with the concurrent GPS information; f) spatial representation in a GIS package. The developed algorithms are applied for the ADCP bathymetric dataset acquired from Han-Cheon in Jeju Island to validate themselves applicability.