• 대한기계학회논문집A
• /
• 제31권10호
• /
• pp.993-998
• /
• 2007

To verify the 2D or 3D positioning accuracy of a multi-axes stage is not easy, particularly, in the case the moving path of the stage is not linear. This paper is a study on a measuring method for the curved path accurately. A machine vision technique is used to trace the moving path of two-axes stage. To improve the accuracy of machine vision, a zoom lens is used for the 2D micro moving path. The accuracy of this method depends of the CCD resolution and array align accuracy with the zoom lens system. Also, a further study for software algorithm is required to increase the tracing speed. This technique will be useful to trace a small object in the 2D micro path in real-time accurately.

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.139-147
• /
• 2001

In this study a path control scheme of simulation models of various vehicles to evaluate their handling characteristic is developed. Based on the forward target method, path deviation error is estimated and the required steering effort to reduce the error is computed by Ziegler-Nichols PID control rule. Velocity control model is also included in the proposed path control scheme to achieve the desired velocity. The path control scheme is implemented on a full vehicle model to perform ISO test procedures, such as steady state cornering, lane change, and sinusoidal input, etc. Through the simulations of ISO test procedures and comparison with actual tests, effectiveness and validity of the path control model is demonstrated.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 가을 학술발표논문집 Vol.30 No.2 (3)
• /
• pp.400-402
• /
• 2003

Ad­hoc Network는 Mobile Node들 간에 Multi­hop 무선 링크로 구성되는 Network을 일컫는 말이며, 동시에 Network를 통제하는 Infrastructure없이 Node들 간의 상호 통신에 의해서 Network이 구성되기도 하고, Node들이 이동하거나 환경적인 장애에 의해서 일시적으로 Network이 구성되지 않기도 한다. 이 논문에서는 대표적인 On­demand Routing Algorithm인 DSR를 이용하여, 두 개의 경로를 유지하여 Primary Path에 문제가 발생하는 경우, Secondary Path가 Primary Path로 전환되어 Data를 전송하고, 이 전 Primary Path에 대하여 지역적으로 복구(Repair)를 수행하고, 설정된 Secondary Path에 대해서도 특정한 조건에서 복구작업을 수행함으로써 Ad­hoc Network에서 경로를 찾고 설정하는데 필요한 Routing Overhead를 줄이고 Ad­hoc Network의 특성상 반드시 보완하여야 하는 전송 Route에 대한 Robustness를 강화하는 방법이다.

• 한국멀티미디어학회논문지
• /
• 제8권6호
• /
• pp.729-734
• /
• 2005

In order to access XML data stored in object databases, an efficient index scheme is inevitable. There have been several index schemes that can be used to efficiently retrieve XML data stored In object databases, but they are all the single path indexes that support indexing along a single schema path. Henee, if a query contains an extended path which is denoted by wild character ('*'), a query processor has to examine multiple index objects, resulting in poor performance and inconsistent index management. In this paper, we propose MPI (Multi-Path Index) scheme as a new index scheme that provides the functionality of multiple path indexes more efficiently, while it uses only one index structure. The proposed scheme is easy to manage since it considers the extended path as a logically single schema path. It is also practical since it can be implemented by little modification of the B -tree index structure.

• ETRI Journal
• /
• 제40권4호
• /
• pp.458-470
• /
• 2018

This paper proposes a hierarchical roadmap (HRM) and its construction process to efficiently represent navigable areas in an indoor environment. HRM is adopted to solve the path-planning problems of mobile robots in indoor environments. HRM has a multi-layered graphical structure that enables it to abstract and cover navigable areas using a smaller number of nodes and edges than a probabilistic roadmap. During the incremental process of constructing HRM, information on navigable areas is abstracted using a sonar gridmap when the mobile robot navigates an unexplored area. The HRM-based planner efficiently searches for paths to answer queries by reducing the search space size using the multi-layered graphical structure. The benefits of the proposed HRM are experimentally verified in real indoor environments.

• Journal of information and communication convergence engineering
• /
• 제8권6호
• /
• pp.687-689
• /
• 2010

In this paper, the equalization for frequency slope of path loss in Multi-Band(MB) OFDM UWB is proposed. The path loss of a signal is proportionate to the square of the signal's frequency. So, the received signal amplitudes of OFDM subcarrier can be different up to 3dB when MB-OFDM occupies bandwidth over 1.5GHz. The differences of subcarrier-amplitudes make an effective of 0.3 bit reduction of soft decision bits of viterbi decoder, and when the effective of 0.3 bit reduction can cause 0.5dB SNR degradation. This paper proposes two modem architectures which compensate for the degraded subcarrier by multiplying the reciprocal of degraded values in analog or digital domain. It is shown that, for the proposed architecture applied to MB-OFDM UWB, the performance improvements up to 0.5dB can be obtained over the conventional uncompensated receiver architecture.

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.25-33
• /
• 2003

A burr has been defined as undesirable projection of material formed as a result of plastic flow from a cutting or shearing operation. It is unavoidable in all kinds of machining operation. As a result, burr makes troubles on manufacturing process due to deburring cost, quality of products and productivity. In this study, the primary interest is about exit burr. The burr formation mechanism in each type of burr is classified. Data bases are developed to predict burr formation result. In the milling operation, we develop an algorithm to analyze the burr formation mechanism by the geometrical analysis on the multi featured workpiece with multi cutting path. The algorithm includes three steps, i. e., the feature identification, the cutting condition identification, and the analysis on exit burr formation. We can predict which portion of workpiece would have the exit burr in advance so that we can manage to find a way to minimize the exit burr formation in an actual cutting. Also, this algorithm can be implemented in a commercial CAM package so that we can simulate the NC code to review the burr formation in advance.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.402-404
• /
• 2013

수중에서의 무선통신 채널환경은 수심이나 염분 등에 의해 전달 속도가 다르며 해면이나 해저에 의해 다중 경로의 영향을 받는다. 본 논문에서는 이러한 다중 경로를 갖는 채널에서의 전송율을 높이기 위해 MIMO(Multi-Input-Multi-Output) 시스템에서의 부호화 기법과 등화기가 결합하여 동작하는 터보 등화기를 갖는 시스템을 사용하였다. 또한 다중경로로 인한 위상 오차 추정은 decision directed 방식의 효율적인 방안을 제시하고 시뮬레이션 하였다. 시뮬레이션 결과 본 논문에서는 제안한 방식을 통해 위상 오차에 대한 영향을 최소화 할 수 있었다.

• Journal of Biosystems Engineering
• /
• 제33권1호
• /
• pp.51-57
• /
• 2008

The purpose of this study was to develop an optimal path planning program for autonomous speed sprayer in orchard. A digital map which contained coordinate information and entity information including height, width, radius of main stem, and disease of a trees was developed to build an optimal path. The digital map, dynamic programming and order-picking algorithm were used for planning an optimal path for autonomous speed sprayers. When this algorithm applied to rectangular-shaped orchards to travel whole trees, the developed program planned the same working path and same traveling distance as those of created by conventional method. But for irregular-shaped orchards, developed program planned differently and 5.06% shorter path than conventional method. When applied to create path for multi-selected trees, irregular-shaped orchards showed 13.9% shorter path and also rectangular-shaped orchards showed 9.1% shorter path. The developed program always planned shorter path than the path created by conventional method despite of variation of shape of orchards.

• 대한임베디드공학회논문지
• /
• 제15권1호
• /
• pp.25-33
• /
• 2020

Multipath routing protocols with unmanned aerial vehicles have been proposed to improve reliability in tactical ad hoc networks. Most of existing studies tend to establish the paths with multiple metrics. However, these approaches suffer from link loss and congestion problems according to the network condition because they apply same metric for both ground and air path or employ the simple weight value to combine multiple metrics. To overcome this limitation, in this study, we propose new routing metrics for path over unmanned aerial vehicles and use the multi-criteria decision making (MCDM) method to determine the weight factors between multiple metrics. For the case studies, we extend the ad-hoc on-demand distance vector protocol and propose a strategy for modifying the route discovery and route recovery procedure. The simulation results show that the proposed mechanism is able to achieve high end-to-end reliability and low end-to-end delay in tactical ad hoc networks.