• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.49-52
• /
• 2000

The Multi-Code CDMA systems that are proposed as an effective transmission methodology in the IMT-2000 systems allow higher rate services under the IS-95 CDMA infrastructure. The Multi-Code CDMA systems convert the higher rate data into the lower rate by serial to parallel operation and spread the converted data streams by the multiple walsh codes, and its mobile receiver needs multiple walsh generators and data correlators to demodulate simultaneously multiple walsh code channels. Therefore, the number of data correlators is increased as the number of traffic channels increases. In this paper, we proposed the new structure of the data correlators using walsh overlay coding, the shared accumulator, and FWHT(Fast Walsh Hadamard Transform) algorithm for reducing the bottle-neck effect resulting the increase of the number of data correlators.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1540-1545
• /
• 2001

This paper is concerned with the reverse link performance of multi-code CDMA systems in multipath fading environments. The degree of orthogonality loss among multiple spreading code channels is characterized as the orthogonality factor. It depends on various system parameters including multipath power profiles of propagation channels and the number of Paths resolved at a Rake receiver. The effect of the parameters on the system performance is then investigated in terms of bit error rate and required signal quality. The results show that multipath delay power profiles dominantly affect mutual interference among multi-code channels and multipath combining gain by bandwidth expansion is not so great due to the increase of the mutual interference. Moreover, the orthogonality factor is derived as the value of between (1/m) and 1.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.539-549
• /
• 1999

In this paper, the bit error rare (BER) performance of DS/CDMA DQPSK communication system in the presence of multi access interference, impulsive noise and Nakagami fading is investigated. The DS/CDMA DQPSK communication system adopts Maximum Ratio Combining (MRC) diversity reception and error correcting BCH code technique to enhance system performance. Using the derived error probability equation, the error rate performance of DS/CDMA DQPSK communication system has been evaluated and shown in figures to discuss as a function of impulsive index(A), Gaussian noise to impulsive noise power ratio($\Gamma$'), multi access interference(Κ), Nakagami fading parameter(m), the number of diversity branch (Ｌ), the number of error correction symbol (t), PN code sequence length(N) and $E_b/N_0$. The error performance of DS/CDMA-MDPSK signals improve by adopting MRC diversity and BCH(15,7) coding technique in the environment of impulsive noise plus Nagakami fading. From the results, we known that proposed system is affected by multi access interference, impulsive noise and Nakagami fading in radio communication system environment. Also, BER performance of DS/CDMA DQPSK communication system cam be improved increasing either the power of desired signal or the value of Gaussian noise to impulsive noise power ratio. And BCH(15,7) code technique is more effective to restrain the affection of multi access, interference, impulsive noise and Nakagami fading in DS/CDMA DQPSK communication system than MRC diversity reception technique.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.149-154
• /
• 2004

In this paper, Interference-Cancelled CDMA system using binary ZCD spreading codes is introduced. Proposed Interference-Cancelled CDMA system can be usefully used for the intra-cellular Interference-Cancelled wireless communication systems. Binary ZCD spreading code sets have various sequence period and family sizes and the ZCD properties of them are very effective for Interference-cancelled CDMA Systems. In this paper, we mathematically analyzed the system performance of our proposed Interference-Cancelled CDMA system in the AWGN channel and various interference environments such as MAI and MPI. Furthermore, using the BER performance simulation we certify the available interference cancellation properties of the proposed system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11C
• /
• pp.1030-1036
• /
• 2006

In this paper, we present two methods of correcting bit errors in constant amplitude multi-code (CAMC) CDMA, which uses the redundant bits only. The first method is a parity-based bit correction with hard-decision, where the received signals despread into n two-dimensional structure with both horizontal parity and vertical parity. Then, an erroneous bit is corrected for each $4{\times}4$ pattern. The second method is a turbo decoding, which is modified from the decoding of a single parity check product code (SPCPC). Experimental results show that, in the second method, the redundant bits in CAMC can be fully used for the error correction and so they are not really a loss of channel bandwidth. Hence, CAMC provides both a low peak-to-average power ratio and robustness to bit errors.

• Journal of Communications and Networks
• /
• v.7 no.3
• /
• pp.278-283
• /
• 2005

This paper proposes a blind channel estimation scheme for long code direct sequence code division multiple access (DS­CDMA) systems with multipath fading channels. This scheme combines the advantages of Toeplitz displacement and correlation matching methods to achieve improved performance. The basic idea is to remove the effects of noise and interferences with Toeplitz displacement operation and then estimate the multi path channel parameters with the correlation matching method. Simulation results are presented to show that the proposed scheme provides better MSE performance and robustness against the near-far problem.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6A
• /
• pp.775-781
• /
• 1999

A multi-media variable processing gain DS/CDMA system are considered. Two types of information sources with different rates and transmitting powers are assumed to be stransmitted simultaneously in the same channel. Average signal-to-noise ratios at the correlation receiver outputs for each type of information sources are analytically derived as funtions of partial cross-correlations between spreading code sequences. As the difference of information rates between information sources increase, the difference between signal-to-noise ratio regarding random spreading code and that regarding pseudo random spreading code increases (maximum 1.3dB). The result can provide a analytical tools for use in multi-media DS/CDMA system design.

• Journal of Digital Convergence
• /
• v.12 no.8
• /
• pp.249-255
• /
• 2014

In this paper, we proposed to reduce the interference in the visible light Communication with multi-LEDs for improving the performance of BER and satisfied the QoS. LED is not only lighting device, but also transmitting device in the VLC. Our proposed system is aim to decrease the interference in the multi-LEDs. In addition, it occurred the ISI and CCI by transmitter to receiver different distance. To solve this problem, we proposed the multi-LEDs system using walsh code to reduce ISI and CCI. In addition, our proposed system is able to improve the performance of BER and satisfied the Qos to desire users.

• Korean Journal of Optics and Photonics
• /
• v.13 no.6
• /
• pp.501-505
• /
• 2002

We have numerically analysed the effects of the light sourer spectral power distortion in an optical CDMA system using PN codes and FBGI for ultra-fast multi-access optical networks. The interference between two CDMA channels decreases with an increase in the code length and the .simultaneous access number is equal to the code length in the region of 0 to 15% spectral power distortion. As a result, the spectral power distortion with optical spectrum is very important in designing the optical CDMA systems.

• Journal of Convergence Society for SMB
• /
• v.6 no.3
• /
• pp.21-27
• /
• 2016

In this paper, we introduce the PB/MC-CDMA (Partial Block/Multi-Carrier-Code Division Multiple Access) system to mitigate inter-cell interference (ICI) and enhance user capacity in the small cell environment. In 5G mobile communications, the number of devices connected to the network is expected to increase exponentially with the expansion of the IoT (Internet of Things) services. In addition, each device is expected to be required by the various data rates by their content types. In LTE/LTE-A, there are some limitations that large scale connectivity and supporting various data rates. Therefore, we introduce a PB/MC-CDMA physical layer system which is suitable for the small cell environment, and evaluate the performance in the multi cell environment which is affected by ICI. Through computer simulation results, we demonstrate the effectiveness of PB/MC-CDMA for the small cell environment.