본 연구는 경기도 광주지역의 낙엽송 임분에 인공 강우기를 설치하여 수리특성과 관련한 공간 변이와 상관관계를 구명하기 위하여 수행되었다. 수분유속과 보유능은 원래 토성, 구조와 유기물을 근거로 지표면에서 인공가우기로 수분을 일정속도로 가하면서 측정하였다. 이 방법은 간단히 유기물을 제거하거나 기존의 상태에서 수평한 지표면에 3가지의 강우 강도에서 실시하였으며 한편 경계면은 안정하며 포화상태의 습윤 토양에서 투수계수와 매트릭 유속기능을 조사하였다. 투수계수는 $_1$( $Z_{c}$) = $_2$( $Z_{c}$) = $_{c}$ 이라는 지속적 유속 조건하에서 $K_{i+}$$_1$$_{c}$= $K_{i}$( $_{c}$) [1-d /dz]의 공식을 적용하였다. 본 연구 결과 토양내에서 유속에 영향을 미치는 공극 특성과 유기물 함량이 광범위하게 수분 보유능과 포화투수계수의 공간 변이에 영향을 미치는 것으로 조사되었다.것으로 조사되었다.되었다.
Journal of Advanced Marine Engineering and Technology
/
제39권4호
/
pp.443-448
/
2015
선박용 질소산화물 저감장치의 혼합영역에서 유동혼합 성능을 개선하기 위해 스월형 혼합기가 개발되었다. 본 연구에서는 스월형 혼합기와 각단의 날개 각도가 조절 가능한 다단 스월형 혼합기가 고려되었다. 두 스월형 혼합기의 최적 날개 각도를 도출하기 위해 날개 각도가 균일지수 및 압력강하에 미치는 영향을 수치해석 기법을 이용하여 조사하였다. 스월형 혼합기에서는 혼합기의 날개 각도를 $10^{\circ}$ 에서 $80^{\circ}$ 까지 변화시킬 때, 최적의 유동혼합 성능은 베인 각도 $30^{\circ}$에서 $60^{\circ}$ 범위에서 나타났으나, 압력강하는 베인 각도 증가에 따라 선형적으로 증가하였다. 반면 다단 스월형 혼합기에서는 각 단의 날개각도를 조절함으로써 압력강하를 낮추면서도 높은 혼합성능의 유지가 가능함을 보였다.
이 연구는 동아시아 (중국, 한국, 그리고 일본) 여름몬순과 그 변동성을 MME (multi-model ensemble)을 이용하여 IPCC AR4 (Intergovernmental Panel on Climate Change Fourth Assessment Report) 실험의22개 접합 기후모델 결과 자료로 분석하였다. 결과자료들은 사용 가능한 모든 모델의 평균값을 이용하였다. 여름 몬순 기간 동안 최대 강수를 가지는 연주기는 모델에 의해 모의되었으나 장마(Meiyu-Changma-Baiu) 강수밴드의 이동(북쪽)과 연관되어 7월에 나타나는 최소값은 모의하지 못했다. MME 강수 패턴은 북태평양아열대 고기압과 장마전선대의 위치와 연관된 강수의 공간적 분포를 잘 나타내었다. 그러나 중국, 한반도, 그리고 일본의 동해와 인근 해역의 강수는 과소 예측되었다. 마지막으로 $CO_2$ 농도 배증시나리오의 복사 강제에 대한 미래예측을 분석하였다. MME는 $CO_2$ 농도가 배증될 때 동아시아지역에서 강수는 평균 7.8%로 나타났고, $5{\sim}10%$의 변화폭을 보였다. 그러나 이러한 강수의 증가는 통계적으로 한반도와 일본, 그리고 인근 북중국 지역에서만 중요한 의미를 가진다. 강수 예측에서 나타난 변화는 아열대 고기압의 강도 변화에 비례하는 것으로 나타났다. 그리고 봄에서 초가을까지 여름 몬순의 지속기간이 길어짐을 확인하였다.
발사 이전에 OSMI 모의 복사량을 산출함은 실제로 관측할 자료를 추정하고, 자료처리를 위한 준비에 매우 유용하다. 1999년 발사예정인 다목적 실용위성의 탑재체 중의 하나인 OSMI 자료처리 시스템은 SeaWIFS 자료처리 시스템을 OSMI에 맞추어 재개발된 것이다. 모의 복사량 계산은 OSMI 센서의 파장대역 및 스캔방식, 다목적 실용위성의 궤도에 관한 정보가 고려되어야 한다. 본 연구에서는 대양에서의 OSMI 모의 복사량을 산출하기 위해 CZCS에서 관측한 엽록소를 다목적 실용위성이 관측한다는 가정을 하게 되었다. 궤도 예측에는 수정된 Brouwer-Lyddane 모델이, water-leaving 복사량을 산출하기 위해 CZCS 엽록소 농도가, OSMI가 관측할 대기에 의한 복사량 계산에는 여러 가지 복사모델이 이용되었다. OSMI의 412, 443, 490, 555, 765, 865nm 6가시광선 파장대역에서 모의 복사량을 산출하였다. 예상대로, 총 복사량 중 water-leaving 복사량은 아주 작으며 (10% 미만), 태양해면반사에 의한 영향은 태양 적위 근처에서 관측된다. 그러므로 대기보정은 총 복사량으로부터 엽록소 농도를 계산하는데 매우 중요하다. 태양해면반사에 의해 영향을 받는 자료는 사용할 수 없으므로 OSMI 임무 기간내에 지속적인 전구 해양관측을 위해서는 체계적인 자료수집 계획이 요구된다.
Kim, Jeong-Cheol;Kim, Dae-Hyun;Park, Sung-Hwan;Jung, Hyung-Sup;Shin, Han-Sup
대한원격탐사학회지
/
제30권3호
/
pp.341-350
/
2014
Landsat images can monitor the snow-covered Earth surface variations with the ground resolution of 30m and the multi-spectral bands in the visible, NIR, SWIR and TIR spectral regions for the last 30 years. The Southern Volcanic Zone (SVZ) of Chile consists of many volcanoes, and all of the volcanoes are covered with snow at the top of mountain. Snow cover area in southern province of the SVZ of Chile (37 to $46^{\circ}S$) have been influenced by significant frontal retreats as well as eruptive activities. In this study, we have investigated the changes of the snow-cover area and snow-line elevation at Mt. Villarrica and Mt. Llaima, Chile from three Landsat images acquired on Feb. 1990, 2005 and 2011. The snow-cover areas are 13.42, 26.75 and $21.60km^2$ at Mt. Villarrica in 1990, 2005 and 2011, respectively, and 3.82, 25.12 and $8.89km^2$ at Mt. Llaima in 1990, 2005 and 2011, respectively. The snow-line elevations are 1871, 1738 and 1826m at Mt. Villarrica in 1990, 2005 and 2011, respectively, and 2007, 1822 and 1818m at Mt. Llaima in 1990, 2005 and 2011, respectively. The results indicate that both of the snow-cover and snow-line changes are strongly related with the volcanic activity change. The results demonstrate that the snow-cover area and snow-line elevation changes can be used as an indicator of the volcanic activity at Mt. Villarrica and Mt. Llaima, Chile.
This study had three purposes: (1) to investigate the enrichment levels and dispersion patterns of potentially toxic elements in the rock-soil-plant system; (2) to evaluate the uptake ratios of heavy metals from soils into plants and (3) to assess the chemical speciation of heavy metals in soils. Rock, surface soil and plant samples were collected in the Boeun area underlain by black shales of the Okchon Zone. These samples were analyzed for multi-elements using INAA, ICP-AES and AAS. The maximum abundance of U in black shales is 16 mg/kg and radioactivity counts up to 300 cpm. In particular, Mo, V, Ba, Cd, Pb and U are enriched in black shales. Most of soils derived from black shales show high concentrations of U, As, Mo, Ba, Cu, Cd, Pb, Zn and mean concentrations of As and Mo in soils (20 mg/kg of As and 6.6 mg/kg of Mo) are higher than the permissible level suggested by Kloke (1979). Enrichment index values of soils are calculated and higher than 1.0 in the black shale area with the highest value of 6.4. Mean concentration of Cd in plants is higher than those of Cu, Pb and Zn. The concentration of Cd in plant species decreases in the order of Chinese cabbage > red pepper > soybean=sesame > rice stalk > com > rice grain. The biological absorption coefficients (BAC) in plants are in the order of Cd > Zn=Cu > Pb, which suggests that Cd is more bioavailable to plants than Cu, Pb and Zn. From the results of sequential extraction analysis of soils, relatively high proportion of Cu, Pb and Zn are present as residual fractions whereas that of Cd as non-residual fractions. Cadmuim occurs predominantly as exchangeable/water-acid soluble phase in soils, and Cd is more mobile and bioavailable than Cu, Pb and Zn.
The characteristics of flame propagation in inert particle-laden $H_2$/Air premixed gas are numerically investigated on this study. The 2nd order TVD scheme is applied to numerical analysis of governing equations and multi-step chemical reaction model and detailed transport properties are sued to solve chemical reaction terms. Radiation heat transfer is computed by applying the finite volume method to a radiative transfer equation. The burning velocities against the mole fractions of hydrogen agree well with results performed by different workers. The inert particles play significant roles in the flame propagation on account of momentum and heat transfer between gas and particles. Gas temperature, pressure and flame propagation speed are decreased as the loading ratio of particle is increased. Also the products behind flame zone contain lots of water vapor whose absorption coefficient is much larger than that of unburned gas. Thus, the radiation effect of gas and particles must be considered simultaneously for the flame propagation in a mixture of $H_2$/Air and inert particles. As a result, it is founded that because the water vapor emits much radiation and this emitted radiation is released at boundaries as radiant heat loss as well as reabsorbed by gas and particles, flame propagation speed and flame structure are altered with radiation effect.
인공위성 영상자료들은 촬영조건 및 센서의 특성에 따라 다른 기하학적인 왜곡을 포함하고 있을 뿐만 아니라 공간, 방사 및 분광 해상도가 상이하기 때문에 정밀한 분석 결과 산출에 어려움이 있다. 즉, 두 개 이상의 영상을 비교 분석하기 위해 기본적인 센서 정보의 차이에서 발생하는 정오차를 소거하고 지형기복에 의해 발생하는 부정오차를 제거하기 위한 정밀 기하보정은 반드시 선행되어야 한다. 본 연구에서는 인공지형지물 변화탐지 기본도 를 구축하기 위해 위성의 센서정보를 이용한 센서모델링을 실시하였고 지상기준점과DEM자료를 가지고 정밀편위수정함으로써 다른 센서 및 촬영조건에 따라 발생하는 정오차를 소거하였다. 즉, 정밀편위수정법에 의해 Kompsat EOC 영상의 기복변위량을 감소시킬 수 있었고, 변화탐지를 위해 사용된 영상의 정합성과를 도심지역, 산림지역 및 혼합지역으로 나누어 시험 지역을 선정하여 검토한 결과 모든 지역에서 약 10% 정도의 정합률이 향상됨으로써 영상의 위치정확도를 향상시킬 수 있었다. 이러한 기본도를 가지고 이루어지는 변화탐지 결과는 지형지물의 갱신이나 다양한 GIS 응용의 기본 자료로서 효율적으로 사용할 수 있을 것으로 기대된다.
Many experimental and numerical approaches have been developed to evaluate paving materials and to predict pavement response and distress. Micromechanical simulation modeling is a technology that can reduce the number of physical tests required in material formulation and design and that can provide more details, e.g., the internal stress and strain state, and energy evolution and dissipation in simulated specimens with realistic microstructural features. A clustered distinct element modeling (DEM) approach was implemented In the two-dimensional particle flow software package (PFC-2D) to study the complex behavior observed in asphalt mixture fracturing. The relationship between continuous and discontinuous material properties was defined based on the potential energy approach. The theoretical relationship was validated with the uniform axial compression and cantilever beam model using two-dimensional plane strain and plane stress models. A bilinear cohesive displacement-softening model was implemented as an intrinsic interface and applied for both homogeneous and heterogeneous fracture modeling in order to simulate behavior in the fracture process zone and to simulate crack propagation. A disk-shaped compact tension test (DC(T)) with heterogeneous microstructure was simulated and compared with the experimental fracture test results to study Mode I fracture. The realistic arbitrary crack propagation including crack deflection, microcracking, crack face sliding, crack branching, and crack tip blunting could be represented in the fracture models. This micromechanical modeling approach represents the early developmental stages towards a 'virtual asphalt laboratory,' where simulations of laboratory tests and eventually field response and distress predictions can be made to enhance our understanding of pavement distress mechanisms, such its thermal fracture, reflective cracking, and fatigue crack growth.
Recently, the production of shipbuilding and offshore plant industries, with a trend toward large structures, has led to an increased use of high strength ultra-thick plates. The use of ultra-thick plates increases the welding tasks, and the welding process generates distortion and residual stress in the weldment because of the rapid heating and cooling. Welding distortion and residual stress in the welded structure resulte in many troubles such as deformation and life deterioration. In particular, the welding residual stress has an important effect on welding deformation, fatigue, buckling strength, brittleness, etc. The purpose of this study was to evaluate the residual stress at a multi-pass weldment using an experimental method for EH36 high-tension steel. In this experimental method, AIS3000 was used to measure the residual stress of a welded part, HAZ, and base metal; EPMA and XRD were used to study the material properties.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.