• Science of Emotion and Sensibility
• /
• v.23 no.1
• /
• pp.29-40
• /
• 2020

Visually impaired people use tactile maps to get spatial information about their surrounding environment, find their way, and improve their independent mobility. However, classical tactile maps that make use of braille to describe the location within the map have several limitations, such as the lack of information due to constraints on space and limited feedback possibilities. This study describes the development of a new multi-modal interactive tactile map interface that addresses the challenges of tactile maps to improve the usability and independence of visually impaired people when using tactile maps. This interface adds touch gesture recognition to the surface of tactile maps and enables the users to verbally interact with a voice agent to receive feedback and information about navigation routes and points of interest. A low-cost prototype was developed to conduct usability tests that evaluated the interface through a survey and interview given to blind participants after using the prototype. The test results show that this interactive tactile map prototype provides improved usability for people over traditional tactile maps that use braille only. Participants reported that it was easier to find the starting point and points of interest they wished to navigate to with the prototype. Also, it improved self-reported independence and confidence compared with traditional tactile maps. Future work includes further development of the mobility solution based on the feedback received and an extensive quantitative study.

• Journal of Science and Technology Studies
• /
• v.18 no.1
• /
• pp.219-265
• /
• 2018

Recently, interest in energy tranisition is rising. Energy transition requires active participation and cooperation of diverse stakeholders, including users / citizens, in that it requires not only changes in technological factors but also changes and coordination of various social factors. Living labs are attracting attention as one of the ways to do this. This article is a detailed analysis of the activities of the mini-PV living lab in the urban area from 2016 to 2017 at the Seoul, Sung Dae Goal. Through the Living Lab, mini PV DIY products, backup centers, local financial services, and the development of a variety of education and training strategies have been achieved. These activities and achievements were analyzed through questions raised on strategic, tactical, and operational levels, as well as through multi-level perspective and interaction between initiative, regime, and niche. In conclusion, this living lab activity confirmed the possibility of a 'transition lap' to solve social problems such as sustainability of energy production and utilization. In particular, it gained remarkable results in terms of the operational leves of transition management governance, that is, transition experiment, and it was also remarkable in that it was the initiative of citizens. However, it did not proceed without difficulty. In particular, structural problems such as the conflict between the flexibility inherent in living lab and the bureaucratic rigidity of the financial support organization have appeared. There was also a limitation that there was no 'transition field' on the strategic level necessary to replicate and expand strategic niches while spreading the knowledge gained from the transition experiment, forming the vision of transition.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.12
• /
• pp.41-49
• /
• 2004

Increase of internet users and new types of applied traffics, have led to demand for more bandwidth for each application. Hence, the amount of internet traffic has risen sharply and it has demanded to use limited resources, such as wavelength and bandwidth, more effectively. These kind of needs can be satisfied with OXC(Optical cross-connects) based on GMPLS that carry out IP packet switching and wavelength switching at the same time and Provide very wide bandwidth. In RSVP-TE signaling of GMPLS studied by IETF. every lambda router in core network should be able to convert wavelength. So, lots of wavelength converters and needed and building and managing cost is high. Another problem is that optimized traffic is limited. In this paper We suggest strengthened GMPLS RSVP-TE signaling algorithm for a better lightpath setup. When setup signaling is blocked suggested algorithm does not send PathErr message to Edge Router, but looks for nearest lambda router which can convert wavelength and carry out setup signaling from that node. Such algorithm can reduce the chance of blocked lightpath setup signaling and provide effective arrangement of lambda router in core network by calculating proper number of wavelength converter.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.79-88
• /
• 2006

In this paper, we designed and implemented ubiquitous u-Health system using RFE and ZigBee. We made a wireless protocol Kit which combines RFE Tag recognition and ZigBee data communication capability. The software is designed and developed on the TinyOS. Wireless communication technologies which hold multi-protocol stacks with RFID and result in the wireless ubiquitous world could be Bluetooth, ZigBee, 802.11x WLAN and so on. The environments that the suggested u-Health system may be used is un-manned nursing, which would be utilized in dense sensor networks such as a hospital. The the size of devices with RFID and ZigBee will be so smaller and smaller as a bracelet, a wrist watch and a ring. The combined wireless RFID-ZigBee system could be applied to applications which requires some actions corresponding to the collected (or sensed) information in WBAN(Wireless Body Area Network) and/or WPAN(Wireless Person Area Network). The proposed ubiquitous u-Health system displays some text-type alert message on LCD which is attached to the system or gives voice alert message to the adequate node users. RFE will be used as various combinations with other wireless technologies for some application-specific purposes.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.107-115
• /
• 2013

Smart appliances with multi-media and telecommunication equipments provide users complicated convenience functions. On the contrary, 8-bit controller-based low performance electronics still cannot afford such multimedia and telecommunication. If we find a way to have low-end electronics connected and provide complicated functions, they can be also made "smart". Fortunately, 8-bit controllers used in low-end appliances have UART, which can be connected to any of BlueTooth, Wi-Fi and ZigBee communication modules which can, in turn, communicate with smart devices. Any communication module can be attached to the low-end electronics due to the variety of smart devices' connectivity at the other side. Although the convenience functions seem complicated, they are actually macros in a script form composed of micro commands which implement the base functions of appliances. Since the kinds of the base functions are not that many, the low-end electronic appliances will become "smart" if their control program can be extended to execute sequentially the micro commands in any combination. Such simple innovation has not seen the world, until now due to the overhead of the additionally required hardware such as display devices and buttons. The high-quality display and touch screen functionalities of smart devices can replace the required hardware, and remove the overhead completely. In fact, the low-end appliances become smart as if an "evolution kit" is newly equipped.

• The Journal of the Korea Contents Association
• /
• v.20 no.2
• /
• pp.150-161
• /
• 2020

Generation Z(Gen Z), which is referred to people in their late teens to early 20s, becomes one of new major consumer groups in the society. More than 80 percent Gen Z use YouTube content as a main information channel. In this study, we investigate what kind of factors make Gen Z immersed when watching YouTube content. In the background study, we examined immersion and set the cognitive conditions of immersion as reality, fascination, control, and driving as a framework for analysis of case study. In the case study, we analyzed the most popular YouTube channels of each category among the Gen Z with the established framework and then identified 3 main factors: reality, 5 senses, and unpretentiousness and 8 characteristics of them. By conducting survey with Gen Z, we wanted to verify the validity of the characteristics and find out the difference among categories. Subjects answered on a five-point scale how the characteristics of each immersion factor corresponded to their favorite channels. As a result, seven characteristics: 1) familiarity of background, 2) reality of acting, 3)familiarity of material, 4)YouTubers' appearance and 5) voice, 6)multi-sensory, and 7)YouTuber's ability to resemble viewers influenced more than 50% of users' immersion. Although there was no significant difference among categories, the familiarity of the material and the five senses stimulus (YouTube's appearance, voice, audiovisual and surrogate taste) were the most important factors in the entertainment category.

• Journal of Korea Multimedia Society
• /
• v.7 no.1
• /
• pp.132-144
• /
• 2004

With the rapid development of internet technology, the number of internet users and the amount of multimedia information on the internet is ever increasing. Recently, the web sites, such as e-business sites and shopping mall sites, deal with lots of image information. As a result, it is required to support content- based image retrieval efficiently on such image data. This paper proposes an intelligent image retrieval system, which adopts XML, technology. To support object-based col)tent retrieval on product catalog images containing multiple objects, we describe a multi -level metadata structure which represents the local features, global features, and semantics of image data. To enable semantic-based and content-based retrieval on such image data, we design a XML-Schema for the proposed metadata and show how to represent such metadata using XML- documents. We also describe how to automatically transform the retrieval results into the forms suitable for the various user environments, such as web browser or mobile browser, using XSLT The proposed scheme can be easily implemented on any commercial platforms supporting XML technology. It can be utilized to enable efficient image metadata sharing between systems, and it will contribute in improving the retrieval correctness and the user's satisfaction on content-based e-catalog image retrieval.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.327-330
• /
• 2008

Resently as ubiquitous environment rapidly emerges due to the development of network and information communication technology, ubiquitous computing is being noticed as a technology that will take the lead in information technology industry of the future. For the realization of this Ubiquitous Service requires some technique such as situations of environment and recognition of locations by the Sensor Network, then sensor data have to be transferred to an application service after processes. Also the creation rule of registration and search of the event is necessary because the USN sensor data must be possible to specific the multi condition of event which relates on using time. And for using a numerous sensor data provision service, service provider can publish its service in standardized registry for users to search and use the service registry. Currently there is the web service for a WS-Eventing and a UDDI with standard, but the event and the service registry is unnecessary or there is a portion which is insufficient. In this paper, I design and implementated standardzation of event definition for USN application service and service registry structure, standard API.

• Journal of KIISE
• /
• v.42 no.11
• /
• pp.1441-1451
• /
• 2015

As one of the most spotlighted research areas, these days, the Internet of Things (IoT) aims to provide users with various services through many devices. Since there exist so many devices in IoT environments, it is inefficient to manually configure the domain name system (DNS) names of such devices. Thus, for IPv6-based IoT environments, this paper proposes a scheme called the DNS Name Autoconfiguration (DNSNA) that autoconfigures an IoT device's DNS name and manages it. In the procedure for generating and registering an IoT device's DNS name, the standard protocols of the Internet Engineering Task Force (IETF) are used. Since the proposed scheme resolves an IoT device's DNS name into an IPv6 address in unicast through a DNS server, it generates less traffic than multicast-based mDNS (Multicast DNS) which is a legacy DNS application for the DNS name service in the smart home. Thus, the proposed scheme is more appropriate in multi-hop IoT networks than mDNS. This paper explains the design of the proposed scheme and its service scenarios, such as smart home and smart road. It also explains the implementation and testing of the proposed scheme in the smart grid.

• The Journal of the Korea Contents Association
• /
• v.11 no.11
• /
• pp.49-61
• /
• 2011

In recent, library is considered as an integrated knowledge convergence center that can respond to various requests about information service of users. Therefor it is necessary to establish a novel information system based on information communications technologies of the era. In other words, it is currently required to develop mobile information service available in portable devices such as smart phones or tablet PCs, and to establish information system reflecting cloud computing, SaaS, Annotation, and Library 2.0 etc. In this paper we design and implement a library information system using collective intelligence and cloud computing. This information system can be adapted for the varieties of mobile service paradigm and abruptly increasing amount of electronic materials. Advantages of this concept model are resource sharing, multi-tenant supporting, configuration, and meta-data supporting etc. In addition it can offer software on-demand type user services. In order to test the performance of our system, we perform an effectiveness analysis and TTA authentication test. The average response time corresponding to variance of data reveals 0.692 seconds which is very good performance in timing effectiveness point of view. And we detect maturity level-3 or 4 authentication in TTA tests such as SaaS maturity, performance, and application programs.