• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11A
• /
• pp.1086-1095
• /
• 2007

This paper proposes a novel non-coherent TOA estimation scheme using multiple correlation process on the existence of multiple simultaneously operating piconets (SOPs). Impulse radio-ultra wideband (IR-UWB) based on direct sequence spread spectrum (DSSS) using Gold sequence is employed in order to discriminate each piconet. In order to enhance the characteristic of correlation, this paper presents the method of multiple mask operation (MMO). The time of arrival (TOA) of direct line of sight (DLOS) path is estimated via two step coarse/fine timing detection. To verify the performance of proposed scheme, two distinct channel models approved by IEEE 802.15.4a Task Group (TG) are considered. According to the simulation results, it could conclude that the proposed scheme have performed better performance than the conventional method well even in densed indoor multi-path environment as well as in the existence of multiple SOPs.

• Journal of Korean Elementary Science Education
• /
• v.25 no.1
• /
• pp.27-38
• /
• 2006

The purpose of this study was to develop a test of a creative problem solving (CPS) for the selection of gifted science students in elementary school. For this, the methods and procedures of the selection of gifted science students was investigated through the internet homepages 23 gifted science education centers of universities and 16 city. province offices of education. The results of this study were as follows: Most of the gifted science students were selected through a multi-step examination process. They were selected on the basis of their records by recommendation of a principal or a classroom teacher in their school, by operation of standardized tests (ex. intelligence quotient score, achievements in science and mathematics, interest and attitude/aptitude for science as well as through other means), as well as through intensive observation of those gifted science students who are selected by interview and oral tests. The selection of gifted students was not evaluated through creativity testing; giftedness in city. province office of education. Testing of CPS was found to be especially lacking in these organizations. For the development of the test items of CPS in science, the five elements were extracted through the framework for the content analysis of the CPS: problem exploration, problem statement, solution thinking, experiment design, and assesment. In addition, suggestions were made regarding an appropriate scoring system for the test of the CPS. As the result of the developed test was applied to the 4th grade of the gifted and general student, we found that gifted students were superior to general students. In conclusion, it was that the CPS test developed in this study should be used to evaluate the CPS for the selection of gifted students.

• Archives of design research
• /
• v.15 no.2
• /
• pp.243-252
• /
• 2002

Industrial design has been need to made a new tool for human with adaptable to situation the age. But, at early America, it is very difficult that role of design settle down and progress than these days. It is not to he easy newly born in industrial design because of rapidly changing the America situation with multi settlers, the Depression and world wars. There was various design change in short period. So we called the step modern 1920 and the streamlined 1930. The study is background of American design by variety cultures & creatures from 1920s to 1930s. Some of Korea design has affected of America cultures at duration of 6.25 war and now. This study has included early culture & industrial life, designer activity, and at the part of rear new invention, industrial design relate to architect, four leading designers Walter Dorwin league, Norman Bel Geddes, Henry Dreyfuss, Raymond Loewy. In present world situation, It is important in all aspect to understand that early process at America industrial design. Early American culture is constructed from the building block of the puritan ethic and is sheathed by liberal mercantilism, today is became one stir it into the common molting pot.

• Biomedical Science Letters
• /
• v.21 no.1
• /
• pp.40-49
• /
• 2015

Mesenchymal stem cells (MSCs) have the ability to self-renew and differentiate into multi-lineage cells, thus highlighting the feasibility of using umbilical cord blood-derived MSCs (UCB-MSCs) for cell-therapy and tissueengineering. However, the low numbers of UCB-MSC derived from clinical samples requires that an ex vivo expansion step be implemented. As most stem cells reside in low oxygen tension environments (i.e., hypoxia), we cultured the UCBMSCs under 3% $O_2$ or 21% $O_2$ and the following parameters were examined: proliferation, senescence, differentiation and stem cell specific gene expression. UCB-MSCs cultured under hypoxic conditions expanded to significantly higher levels and showed less senescence compared to UCB-MSCs cultured under normoxic conditions. In regards to differentiation potential, UCB-MSCs cultured under hypoxic and normoxic conditions both underwent similar levels of osteogenesis as determined by ALP and von Kossa assay. Furthermore, UCB-MSCs cultured under hypoxic conditions exhibited higher expression of OCT4, NANOG and SOX2 genes. Moreover, cells expanded under hypoxia maintained a stem cell immnunophenotype as determined by flow cytometry. These results demonstrate that the expansion of human UCB-MSCs under a low oxygen tension microenvironment significantly improved cell proliferation and differentiation. These results demonstrate that hypoxic culture can be rapidly and easily implemented into the clinical-scale expansion process in order to maximize UCB-MSCs yield for application in clinical settings and at the same time reduce culture time while maintaining cell product quality.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.160-160
• /
• 2010

Organic electronic devices require a passivation layer to ensure sufficient lifetime. Specifically, flexible organic electronic devices need a barrier layer that transmits less than $10^{-6}\;g/m^2/day$ of water and $10^{-5}\;g/m^2/day$ of oxygen. To increase the lifetime of organic electronic device, therefore, it is indispensable to protect the organic materials from water and oxygen. Severe groups have reported on multi-layerd barriers consisting inorganic thin films deposited by plasma enhenced chemical deposition (PECVD) or sputtering. However, it is difficult to control the formation of granular-type morphology and microscopic pinholes in PECVD and sputtering. On the contrary, atomic layer deoposition (ALD) is free of pinhole, highly uniform, conformal films and show good step coverage. In this study, the passivation layer was deposited using single-process PEALD. The passivation layer, in our case, was a bilayer system consisting of $Al_2O_3$ films and a $TiO_2$ buffer layer on a poly (ether sulfon) (PES) substrate. Because the deposition temperature and plasma power have a significant effect on the properties of the passivation layer, the characteristics of the $Al_2O_3$ films were investigated in terms of density under different deposition temperatures and plasma powers. The effect of the $TiO_2$ buffer layer also was also addressed. In addition, the water vapor transmission rate (WVTR) and organic light-emitting diode (OLEDs) lifetime were measured after forming a bilayer composed of $Al_2O_3/TiO_2$ on a PES substrate.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.6
• /
• pp.96-101
• /
• 2011

Korea Aerospace Research Institute is performing 3 stage transonic axial compressor development program. This paper introduces design step of the compressor, the performance test results and its analysis. In the fore part of the paper, aerodynamic process of the 3 stage axial compressor is presented. To satisfy both of the mass flow and pressure rise, the compressor should rotate at a high rotational speed. Therefore the transonic flow field forms in the rotor stages and it is designed with a relatively high pressure rise per stage to satisfy its design target. The compressor stage consists of 3 stages, and the bulk pressure ratio is 2.5. The first stage is burdened with the highest pressure ratio and less pressure rises occur in the following stages. Also it is designed that tip Mach number of the first rotor row does not exceed 1.3, while the maximum relative Mach number in the rotor stage is between 1.3~1.4 to increase the compressor flow coefficient. The final design has been confirmed by iterating three dimensional CFD calculations to verify design target and some design intentions. In the latter part of the paper, its performance test processes and results are presented. The performance test result shows that the overall compressor performance targets; pressure ratio and efficiency are well achieved. The stator static pressure distributions show that the blade loading is gradually increasing from the downstream of the compressor.

• Journal of the Korean Society for information Management
• /
• v.23 no.4 s.62
• /
• pp.197-214
• /
• 2006

A Web-based environment has very various and heterogeneous users. The emphasis on their individual characteristics may make it hard to reach the general understanding of how they seek and use information on the Web. The purpose of this study is to find common patterns in information seeking behavior on the Web by analyzing a series of cognitive movement of users in interaction with the Web. Based on Dervin's concept and Timeline interview methodology, this study collected 37 Web experience descriptions from 21 respondents, which consisted of 302 steps. Findings addressed that Web information seeking behavior can be classified into seven types : Starting, Searching, Viewing/B row sing , Examining/comparing, Finding/compiling, Deciding/Acting, and Ending. Movement paths in the seven-type information seeking process showed that user's interaction with the Web was repeated and circulated at the Viewing/Browsing step and that information seeking behavior on the Web was multi-directional and non-linear.

• Korean Journal of Clinical Laboratory Science
• /
• v.49 no.4
• /
• pp.337-344
• /
• 2017

To date, no clear threshold that has been established for defining an adequate store of vitamin D for bone health. Therefore, this study aims to determine the required level of vitamin D to maintain a healthy skeleton based on bone remodelling process among healthy adult population. This was a cross sectional study, involving a healthy adult population in Kota Bharu, Malaysia, aged 18~50 years. We measured serum 25(OH)D (vitamin D), serum parathyroid hormone (PTH), serum C-terminal telopeptide of type 1 collagen (CTX), and Procollagen 1 Intact N-Terminal (P1NP) in 120 healthy adults selected via multi stage sampling (64 males, 56 females) from 6 subdistricts in Kota Bharu. The mean level of 25(OH)D was 23.50 (${\pm}8.74$) nmol/L. There was a significant difference of the vitamin D level between genders ($26.81{\pm}8.3nmol/L$ vs $19.72{\pm}7.68nmol/L$ in males and females respectively) (p value<0.001). More than 50% of female subjects had 25(OH)D less than 20 nmol/L, while only 20.3% of male subjects had 25(OH)D below 20 nmol/L. Based on the LOESS plot, the bone turnover markers showed a plateauing result, at the 25(OH)D level of 35 nmol/L for CTX and 20 nmol/L for P1NP. Contrastingly, PTH showed a step rise in the 25(OH)D level of 20 nmol/L. Based on the LOESS plot for CTX, P1NP and PTH versus 25(OH)D, level of vitamin D between 20 to 35 nmol/L is recommended to maintain healthy skeleton.

• Journal of Sensor Science and Technology
• /
• v.8 no.2
• /
• pp.202-209
• /
• 1999

Microstrip line was fabricated on the oxidized porous silicon layer which has nearly electrically and chemically identical properties with thermally oxidized silicon layer. Thick oxidized porous silicon layer of few tenth of micrometers was prepared by thermal oxidation of porous silicon layer on silicon substrate. Multi-step thermal oxidation process was used to obtain high Quality and thick oxidized silicon layer and to release thermal stress. Microstrip line was fabricated on the oxidized porous silicon layer. Its microwave characteristics were measured and the availability for MMIC substrate was investigated.

• Journal of Radiation Protection and Research
• /
• v.42 no.2
• /
• pp.91-97
• /
• 2017

Background: A gamma energy identifying algorithm using spectral decomposition combined with smoothing method was suggested to confirm the existence of the artificial radio isotopes. The algorithm is composed by original pattern recognition method and smoothing method to enhance the performance to identify gamma energy of radiation sensors that have low energy resolution. Materials and Methods: The gamma energy identifying algorithm for the compact radiation sensor is a three-step of refinement process. Firstly, the magnitude set is calculated by the original spectral decomposition. Secondly, the magnitude of modeling error in the magnitude set is reduced by the smoothing method. Thirdly, the expected gamma energy is finally decided based on the enhanced magnitude set as a result of the spectral decomposition with the smoothing method. The algorithm was optimized for the designed radiation sensor composed of a CsI (Tl) scintillator and a silicon pin diode. Results and Discussion: The two performance parameters used to estimate the algorithm are the accuracy of expected gamma energy and the number of repeated calculations. The original gamma energy was accurately identified with the single energy of gamma radiation by adapting this modeling error reduction method. Also the average error decreased by half with the multi energies of gamma radiation in comparison to the original spectral decomposition. In addition, the number of repeated calculations also decreased by half even in low fluence conditions under $10^4$ ($/0.09cm^2$ of the scintillator surface). Conclusion: Through the development of this algorithm, we have confirmed the possibility of developing a product that can identify artificial radionuclides nearby using inexpensive radiation sensors that are easy to use by the public. Therefore, it can contribute to reduce the anxiety of the public exposure by determining the presence of artificial radionuclides in the vicinity.