• 한국경제지리학회지
• /
• 제10권3호
• /
• pp.344-353
• /
• 2007

창업보육센터는 산학연 연계 활성화를 통하여 기술 및 지식기반의 기업가주의와 신생 중소기업의 혁신을 촉진시키는 효율적인 메커니즘으로 간주될 수 있다. 그러나 창업보육센터의 중소기업 혁신성과는 중소기업의 기술역량, 국가의 기업환경과 경제적 특징에 따라 다양하게 나타날 수 있다. 따라서 본 연구는 선별된 10개 APEC 회원국가별 창업보육센터의 다양한 정책 및 프로그램을 중심으로 전략적 이슈, 기능 및 특징을 조사하여 이들 국가의 창업보육센터를 유형화 하고자 하였다.

• 한국항만학회지
• /
• 제13권1호
• /
• pp.87-100
• /
• 1999

This study was focused on analyzing the headway of various types of trailer in Pusan city with the high heavy vehicle rate. Then Passenger Car Equivalent(PCE) was calibrated in order to identify the impact of trailers in the traffic flow at the signalized intersections. To fulfill this goal types of trailer were classified into five categories such as full trailer semi-trailer unloaded semi-trailer semi-trailer loaded with 20ft container and semi-trailer loaded with 40ft container and Passenger Car Equivalents were identified. the Results are as follows: 1) The PCE’s were 2.64, 1.51, 2.09, 2.16 and 2.23 respectively. 2) The saturation flow rate on the signalized intersection was lower than that on the multi-lane highway in the big city of Korea. 3) The start-up delay on the thru lane was similar to the average value in our country but the start-up delay on the left-turn lane was longer than the average value in our country by the impact of container Vehicles.

• 한국해양공학회지
• /
• 제25권4호
• /
• pp.7-11
• /
• 2011

The installation phase for a topside module suggested can be divided into 9 stages, which include start, pre-lifting, lifting, lifted, rotating, positioning, lowering, mating, and end of installation. The transfer of the topside module from a transport barge to a crane vessel takes place in the first three stages, from start to lifting, while the transfer of the module onto a floating spar hull occurs in the last three stages, from lowering to the end. The coupled multi-body motions are calculated in both calm water and in irregular waves with significant wave height (1.52m), with suggested force equilibrium diagrams. The effects of the hydrodynamic interactions between the crane vessel and barge during the lifting stage have been considered. The internal forces caused by the load transfer and ballasting are derived for the lifting phases. The results of these internal forces for the calm water condition are compared with those in the irregular sea condition. Although the effect of pitch motion on the relative vertical motion between the deck of the floating structure and the topside module is significant in the lifting phases, the internal force induced pitch motion is too small to show its influence. However, the effect of the internal force on the wave-induced heave responses in the lifting phases is noticeable in the irregular sea condition because the transfer mass-induced draught changes in the floating structure are observed to have higher amplitudes than the external force induced responses.

• 전기학회논문지
• /
• 제64권6호
• /
• pp.885-890
• /
• 2015

LLC resonant converter has been widely used because of its high efficiency and high energy density. In this paper, we designed a LLC resonant converter as the main power supply of the Nd:YAG pulse laser. First harmonic approximation (FHA) is used to model the LLC resonant converter. FHA equivalent circuit model and the transfer function of the LLC resonant converter is proposed. Soft start technology is also used to suppress the surge current. The laser output simulation test result is identical with the practical test, the laser energy of every pulse can reach up to 2.5J, and the pulse per second (PPS) can be adjusted from 6 to 18. The power system is verified stable and reliable by both of the simulation and experiment results.

• 천문학회보
• /
• 제41권1호
• /
• pp.53.1-53.1
• /
• 2016

With the official start of the operations of the three 1.6 m KMTNet telescope systems from 2015 October, we have initiated a program named KMTNet Supernova Program (KSP) from 2015 to 2019 aiming at searching for supernovae (SNe), other optical transients and related sources. Taking advantage of the 24-hour coverage, high cadence and multi-color monitoring observations, this is optimal for discovering early SNe and peculiar ones. From the start of the previous test observing runs of ~half a year, we have performed observations on several nearby galaxy groups and nearby galaxies with short separations on the sky. We have developed data reduction/variable object search pipelines, meanwhile we have discovered some interesting transient objects. We also stacked all the images for given fields, searched for new objects/galaxies, and discovered several new dwarf galaxies, e.g., in the NGC 2784 galaxy group field (H. S. Park et al.'s talk). We will report the current project status and the results obtained.

• Bulletin of the Korean Chemical Society
• /
• 제22권8호
• /
• pp.903-908
• /
• 2001

The gene aeg-46.5, which is expressed under anaerobic condition, has putative triple -10 regions and four transcription start sites. The mRNA transcription level and its start point change depending on the aerobic/anaerobic growth condition. RNA polymerase and its regulatory proteins must choose which of three -10 region to use. The putative triple 10 region was mutated to make only one of them function with consensus -10 region sequence (TATAAT) and the other two as non-functional region. The results show that the second and third -10 regions are used for the aerobic/anaerobic expression. The third -10 region is responsible for the high aerobic to anaerobic switch ratio. This suggests that only the last two of the putative triple -10 region have functions on aeg-46.5 gene expression switch control. The phenotype of the mutated promoter was tested in the wild type cell and narL - cell. The results indicate that the control by NarL is independent from the selection of -10 region. The expression patterns on multi-copy plasmids and on single-copy chromosome were compared. These results show that the aerobic/anaerobic switch control of aeg-46.5 is through the choice of -10 region. The mechanism of choosing different -10 region remains to be seen.

• Journal of Information Processing Systems
• /
• 제17권5호
• /
• pp.879-891
• /
• 2021

With improvements in living conditions, an increasing number of people are choosing to spend their time traveling. Comfortable tour routes are affected by the season, time, and other local factors. In this paper, the influencing factors and principles of scenic spots are analyzed, a model used to find the available routes is built, and a multi-route choice model based on a game theory utilizing a path recommendation weight is developed. A Monte Carlo analysis of a tourist route subjected to fixed access point conditions is applied to account for uncertainties such as the season, start time, end time, stay time, number of scenic spots, destination, and start point. We use the Dijkstra method to obtain multiple path plans and calculate the path evaluation score using the Monte Carlo method. Finally, according to the user preference in the input path, game theory generates path ordering for user choice. The proposed approach achieves a state-of-the-art performance at the pseudo-imperial palace. Compared with other methods, the proposed method can avoid congestion and reduce the time cost.

• 한국CDE학회논문집
• /
• 제17권3호
• /
• pp.216-223
• /
• 2012

Bill of material (BOM), which structurally represents the relation among parts constructing a product, is usually created when enterprises start to develop a new product. And it is shown as various types of BOM according to business needs and usage such as eBOM (engineering BOM), gBOM (green BOM), mBOM (manufacturing BOM), pBOM (process BOM), etc. eBOM, generally called BOM and created in the design stage of the new product, includes the drawing information of parts in the view of product function. eBOM is extended to gBOM adding the material information of parts to cope with international regulations for environment. eBOM is transformed to mBOM, which includes manufacturing sequence of parts and adds some parts required to fabricate parts and to assemble the product. mBOM is also extended to pBOM adding the process information of each part and additional assembly processes. This study introduces the concept of multi-BOM covering eBOM, gBOM, mBOM and pBOM, and proposes an advanced way to manage product data using multi-BOM system. The multi-BOM system proposed is to manage their relations using transformation function of BOM and master information of all BOMs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권7호
• /
• pp.1657-1670
• /
• 2013

The increase in the number of music files in smart phone and MP3 player makes it difficult to find the music files which people want. So, Query-by-Singing/Humming (QbSH) systems have been developed to retrieve music from a user's humming or singing without having to know detailed information about the title or singer of song. Most previous researches on QbSH have been conducted using musical instrument digital interface (MIDI) files as reference songs. However, the production of MIDI files is a time-consuming process. In addition, more and more music files are newly published with the development of music market. Consequently, the method of using the more common MPEG-1 audio layer 3 (MP3) files for reference songs is considered as an alternative. However, there is little previous research on QbSH with MP3 files because an MP3 file has a different waveform due to background music and multiple (polyphonic) melodies compared to the humming/singing query. To overcome these problems, we propose a new QbSH method using MP3 files on mobile device. This research is novel in four ways. First, this is the first research on QbSH using MP3 files as reference songs. Second, the start and end positions on the MP3 file to be matched are estimated by using multi-layered perceptron (MLP) prior to performing the matching with humming/singing query file. Third, for more accurate results, four MLPs are used, which produce the start and end positions for dynamic time warping (DTW) matching algorithm, and those for chroma-based DTW algorithm, respectively. Fourth, two matching scores by the DTW and chroma-based DTW algorithms are combined by using PRODUCT rule, through which a higher matching accuracy is obtained. Experimental results with AFA MP3 database show that the accuracy (Top 1 accuracy of 98%, with an MRR of 0.989) of the proposed method is much higher than that of other methods. We also showed the effectiveness of the proposed system on consumer mobile device.

• 한국전자거래학회지
• /
• 제26권3호
• /
• pp.1-20
• /
• 2021

코로나19 대유행으로 세계경제포럼에서 그레이트 리셋이 논의되면서 제4차산업혁명의 동력인 인공지능도 조명을 받고 있다. 그러나 인공지능 분야의 기업 연구는 아직도 희소하다. 2000년 이후 관련 연구는 기존 기업에 어떻게 인공지능을 적용하여 가치를 창출할 것인가에 초점이 맞춰져 있으며, 신생기업들이 어떻게 기회를 포착하고 기존 사업자들 사이에 진입하여 새로운 가치를 창출하는지에 대한 연구는 거의 찾아볼 수 없다. 이에 본 연구는 소프트웨어의 세부 분야인 인공지능 기반 신생기업들이 기존 소프트웨어 산업과 어떻게 다른 혁신패턴을 갖는가라는 연구 질문을 가지고 다층적 접근론의 종합적 틀을 활용하여 신생 기업들의 사례를 분석하였다. 대상 기업들은 창업 7년 내 의료, 금융, 마케팅/광고, 유통, 제조 분야에서 의도적으로 표집된 머신러닝 모델링 전문 신생 기업들로 벤처기업 인증을 받은 고성장 기업들이다. 분석 결과 기존 소프트웨어 기업들은 전사적 통합 관점의 프로세스 혁신을 이루어냈다면, 이들만의 혁신 패턴은 기존의 프로세스들을 잘게 해체하여 자동화나 가치창출이 어려웠던 단위 프로세스들을 식별해 내고 데이터 기반으로 자동화, 최적화하여 새로운 가치를 제공하고 있다는 것이다. 이 연구의 기여는 통합적인 다층적 접근론의 틀의 유효성을 검증하면서 인공지능 기반 신생 기업들의 탄생과 그들의 혁신 패턴을 제시했다는 데에 있다. 한편 기업 실무적, 정부 정책적 함의를 정리하면, 데이터를 기반으로 혁신을 이끌어내기 때문에 신생 기업일지라도 데이터 관련 규제 등에 대한 제도 대응 역량이 강조되며, 정부는 관련 제도의 불확실성을 제거하고 구체화하여 예측가능하고 유연한 사업 환경을 마련할 필요가 있다.