• 제목/요약/키워드: Multi-sensor Tracking

검색결과 132건 처리시간 0.031초

낮은 SNR 다중 표적 환경에서의 iterative Joint Integrated Probabilistic Data Association을 이용한 표적추적 알고리즘 연구 (Study of Target Tracking Algorithm using iterative Joint Integrated Probabilistic Data Association in Low SNR Multi-Target Environments)

  • 김형준;송택렬
    • 한국군사과학기술학회지
    • /
    • 제23권3호
    • /
    • pp.204-212
    • /
    • 2020
  • For general target tracking works by receiving a set of measurements from sensor. However, if the SNR(Signal to Noise Ratio) is low due to small RCS(Radar Cross Section), caused by remote small targets, the target's information can be lost during signal processing. TBD(Track Before Detect) is an algorithm that performs target tracking without threshold for detection. That is, all sensor data is sent to the tracking system, which prevents the loss of the target's information by thresholding the signal intensity. On the other hand, using all sensor data inevitably leads to computational problems that can severely limit the application. In this paper, we propose an iterative Joint Integrated Probabilistic Data Association as a practical target tracking technique suitable for a low SNR multi-target environment with real time operation capability, and verify its performance through simulation studies.

Secure and Robust Clustering for Quantized Target Tracking in Wireless Sensor Networks

  • Mansouri, Majdi;Khoukhi, Lyes;Nounou, Hazem;Nounou, Mohamed
    • Journal of Communications and Networks
    • /
    • 제15권2호
    • /
    • pp.164-172
    • /
    • 2013
  • We consider the problem of secure and robust clustering for quantized target tracking in wireless sensor networks (WSN) where the observed system is assumed to evolve according to a probabilistic state space model. We propose a new method for jointly activating the best group of candidate sensors that participate in data aggregation, detecting the malicious sensors and estimating the target position. Firstly, we select the appropriate group in order to balance the energy dissipation and to provide the required data of the target in the WSN. This selection is also based on the transmission power between a sensor node and a cluster head. Secondly, we detect the malicious sensor nodes based on the information relevance of their measurements. Then, we estimate the target position using quantized variational filtering (QVF) algorithm. The selection of the candidate sensors group is based on multi-criteria function, which is computed by using the predicted target position provided by the QVF algorithm, while the malicious sensor nodes detection is based on Kullback-Leibler distance between the current target position distribution and the predicted sensor observation. The performance of the proposed method is validated by simulation results in target tracking for WSN.

실외 경비 환경에서 강인한 객체 검출 및 추적을 위한 실외 멀티 모달 센서 기반 학습용 데이터베이스 구축 (Multi Modal Sensor Training Dataset for the Robust Object Detection and Tracking in Outdoor Surveillance (MMO (Multi Modal Outdoor) Dataset))

  • 노동기;양원근;엄태영;이재광;김형록;백승민
    • 한국멀티미디어학회논문지
    • /
    • 제23권8호
    • /
    • pp.1006-1018
    • /
    • 2020
  • Dataset is getting more import to develop a learning based algorithm. Quality of the algorithm definitely depends on dataset. So we introduce new dataset over 200 thousands images which are fully labeled multi modal sensor data. Proposed dataset was designed and constructed for researchers who want to develop detection, tracking, and action classification in outdoor environment for surveillance scenarios. The dataset includes various images and multi modal sensor data under different weather and lighting condition. Therefor, we hope it will be very helpful to develop more robust algorithm for systems equipped with difference kinds of sensors in outdoor application. Case studies with the proposed dataset are also discussed in this paper.

후판의 자동 다층용접을 위한 아크센서 시스템 개발에 관한 연구 (A Study on Development of Arc Sensor System for Automatic Multi-pass Welding of Thick Plate)

  • 문현준;김종희;최주호;김형식
    • Journal of Welding and Joining
    • /
    • 제13권4호
    • /
    • pp.122-131
    • /
    • 1995
  • An automatic welding equipment for thick plates requires the capability of the seam tracking of the weld line which often includes misalignment of the workpiece and variation of groove width. In this study, an automatic welding equipment and control algorithms based on the arc sensor were proposed for the GMA welding of thick plates which had misalignment and gap variation. The developed system being constituted with 5 axis can be automatically controlled by computer and also automnatically set the welding conditions such as welding current, and voltage. The proposed algorithms for the seam tracking in multi-pass welding of the thick plates were constituted as follows : the detection of weaving-end point for findng the variation of groove width, the control of welding velocity for acquiring a constant thickness deposition of weld metal, and the calculation of groove width and height of an arbitrary pass in the multi-pass weld. As results of the application of the system, it was revealed that the system had a good capability in seam tracking and made an excellent weld quality in V groove butt joint.

  • PDF

다중센서 융합 및 다수모델 필터 개념을 적용한 강인한 기동물체 추적 (Robust Maneuvering Target Tracking Applying the Concept of Multiple Model Filter and the Fusion of Multi-Sensor)

  • 현대환;윤희병
    • 지능정보연구
    • /
    • 제15권1호
    • /
    • pp.51-64
    • /
    • 2009
  • 다중센서를 이용한 기동물체의 추적은 GPS, INS, 레이더 및 광학장비 등의 위치추적 센서가 이용되며, 이러한 시스템은 UAV, 유도미사일, 우주선 등의 추적 탐지 통제를 위해 사용된다. 기동물체의 위치추적과 관련한 대부분의 연구는 다수의 레이더를 융합하거나 INS, GPS에 보조센서 추가하는 것이다. 하지만 이기종의 센서는 각 시스템특성 및 오차특성이 상이하므로 융합 간에 이를 고려하여 반영강도를 달리하는 연구가 필요하다. 본 논문에서는 다중센서 융합에 의한 추적 성능 향상을 위해 GPS, INS에 지상 레이더를 추가하여 각 센서특성에 따른 오차분석을 실시하고, 융합 간 오차특성에 따라 각 센서의 Sensor Probability를 변화시켜 정밀도와 안정성을 향상시키는 추적 알고리즘을 제안한다. 평가를 위해 UAV의 기동모델에 대한 시뮬레이션을 통해 고도값을 추출하고 제안 알고리즘을 적용하여 성능분석을 실시한다. 연구를 통해 각 센서의 항법정보 융합 간에 오차정도에 따라 측정치의 반영강도를 변화시켜 항법정보의 정확도 향상과 외부의 고의적인 환경변화 및 교란에도 강인한 추적이 가능하다.

  • PDF

클러터를 고려한 다중 센서 환경에서의 AMMPF를 이용한 기동 표적 추적 알고리즘 연구 (Multi-sensor Single Maneuvering Target Tracking in Clutter using AMMPF)

  • 김다솔;송택렬;오원천
    • 한국음향학회:학술대회논문집
    • /
    • 한국음향학회 2004년도 추계학술발표대회논문집 제23권 2호
    • /
    • pp.479-482
    • /
    • 2004
  • In this article we consider a single maneuvering target Tracking algorithm in the presence of missing measurements and high clutter environments for multi-sensor target tracking problem. The tracking algorithm is based on the Particle filtering method to predict and update target states. Proposed is the AMM-PF(Auxiliary Multiple Model Particle Filter)[2] method for maneuvering target tracking to improve performance in track estimate and maintenance with a high level of uncertainty. The algorithm we propose is compared to the Extended Kalman Filter(EKF). A simulation study is included.

  • PDF

고속 다전극 자동 용접 시스템 (Automatic Multi-torch Welding System with High Speed)

  • 문형순;고성훈;김용백
    • Journal of Welding and Joining
    • /
    • 제25권2호
    • /
    • pp.49-54
    • /
    • 2007
  • Since the wall thickness can be up to 6" or greater, welds must be made in many layers, each layer containing several passes. However, the welding time for the conventional welding processes such as SAW(Submerged Arc Welding) and FCAW(Flux Cored Arc Welding) can be required many hours. The aim of this paper is to develop a high speed welding system with multi-torch and laser vision sensor for increasing the production speed on the line and to remove the need for the operator so that the system can run automatically for the complete multi-torch multi-layer weld. It was shown that the developed laser vision sensor and analysis of arc blow for multi-torch were effective for multi-pass seam tracking and stable arc. A new automated multi-torch welding systems for thick wall applications has been proved in several production lines.

발사체 추적자료 후처리를 통한 비행궤적 생성 (Flight trajectory generation through post-processing of launch vehicle tracking data)

  • 윤석영;유준
    • 한국산업정보학회논문지
    • /
    • 제19권6호
    • /
    • pp.53-61
    • /
    • 2014
  • 나로우주센터의 발사통제시스템은 우주발사체의 비행궤적과 상태정보를 감시하기 위하여 지상추적시스템(추적레이더 2대, 원격자료수신장비 4대, 광학추적장비 1대)으로부터 정보를 받아 처리한다. 각 추적장치는 주로 다중경로나 클러터, 전파굴절에 의해 자체 오차를 나타내고 있어 전송된 정보들 중 하나만을 이용해서는 우주발사체의 실제 궤적을 판별할 수 없다. 본 논문에서는 취득된 추적자료의 후처리를 통해 우주발사체 비행궤적을 생성해내는 방법을 제시한다. 본 후처리 알고리즘은 크게 대기의 전파굴절에 따른 오차를 보정하는 부분과 다중센서 정보를 융합하는 부분으로 나뉘며, 효과적인 센서 융합을 위해 등가속 운동모델에 기반한 분산식 칼만필터를 구성하였다. 실측 자료의 후처리 적용 결과, 어떤 단일 센서에 의한 것 보다 오차가 최소화된 발사궤적을 얻을 수 있었다.

MWIR 및 SWIR 센서를 이용한 커널상관필터기반의 표적추적 (Target Tracking based on Kernelized Correlation Filter Using MWIR and SWIR Sensors)

  • 선선구;이유리;서대교
    • 한국군사과학기술학회지
    • /
    • 제26권1호
    • /
    • pp.22-30
    • /
    • 2023
  • When tracking small UAVs and drone targets in cloud clutter environments, MWIR sensors are often unable to track targets continuously. To overcome this problem, the SWIR sensor is mounted on the same gimbal. Target tracking uses sensor information fusion or selectively applies information from each sensor. In this case, parallax correction using the target distance is often used. However, it is difficult to apply the existing method to small UAVs and drone targets because the laser rangefinder's beam divergence angle is small, making it difficult to measure the distance. We propose a tracking method which needs not parallax correction of sensors. In the method, images from MWIR and SWIR sensors are captured simultaneously and a tracking error for gimbal driving is chosen by effectiveness measure. In order to prove the method, tracking performance was demonstrated for UAVs and drone targets in the real sky background using MWIR and SWIR image sensors.