• Korean Security Journal
• /
• no.60
• /
• pp.33-61
• /
• 2019

It is quite difficult to actually prove the effectiveness of so-called target-hardening, one of the various strategies used to reduce crime, one of the serious problems in society recently. In particular, three to five minutes is often used as golden time for intruders to give up or stop, which is based on foreign and some indirect research cases in Korea, but there were no studies that more directly identified the average break-in operation time or the abandonment time based on the elapsed time when the shield hardware resists intruders. This study was the first of its kind in Korea to investigate and verify samples of 90 inmates of break-in burglars who were imprisoned in August 2018 by profiling the average criminal experience, education level, age, height and weight of typical Korean professional break-in thieves, and specific criminal methods, average break-in operation time, and the criteria for giving up if not breached. According to the analysis results, in the survey on the number of pre-invasion theft crimes by intruders, many of the respondents who participated in the survey were criminals of professional invasions, and by their physical characteristics, there was not much difference from ordinary adult men. Residential facilities were the highest in the world, followed by commercial and educational facilities. According to the survey on the types of facilities that committed intrusion into residential facilities, it was not safe to say that single-family housing accounted for the largest portion of single-family housing, multi-family housing, apartment high-rise (more than three stories), and apartment low-rise (more than one to three stories) among residential facilities, and that the ratio of apartment high-rise was higher than expected. Based on the average time required to break into a place for an intrusion crime, it is assumed that the psychological time worked in a place where the break-in was difficult, since the break-in was not performed while measuring the time of the break-in operation. In the case of time to give up a crime, more than half of the respondents said they would give up the crime even in less than four minutes, suggesting that a significant number of intrusive crimes can be prevented even if the facility has four minutes of intrusion resistance. This proves that most intruders will give up the break-in if the break-in resistance performance of the security facility is exercised for more than five minutes.

• Korean Journal of Microbiology
• /
• v.40 no.4
• /
• pp.295-301
• /
• 2004

Recently, the rapid increase and global spread of extended-spectrum $\beta-lactamase$ producing clinical isolates has become a serious problem. The incidence of extended-spectrum $\beta-lactamase$ producing clinical isolates of Escherichia coli in Korea and susceptibility to antimicrobial agents were investigated. Total 233 isolates of E. coli were obtained from urine from hospitalized patients in Guro hospital, Korea University in 2001. One hun­dred and eighty four isolates $(78.9\%)$ were resistant to ampicillin, 80 isolates $(34.3\%)$ were resistant to ceph­alothin, 93 isolates $(39.9\%)$ were resistant to gentamicin, and 64 isolates $(27.5\%)$ were resistant to norfloxacin. Among 233 isolates, 17 isolates $(7.3\%)$ were positive as determined by the double disk synergy test. When min­imal inhibitory concentrations were assayed with additional 6 antimicrobial agents, 13 isolates $(76.5\%)$ were multi-drug resistant to at least four different class antimicrobial agents. Extended-spectrum $\beta-lactamase$ were characterized with isoelectric focusing gel electrophoresis and DNA sequencing. They were TEM-1 in 5 iso­lates, TEM-15 in 1 isolate, TEM-20 in 1 isolate, TEM-52 in 4 isolates, TEM-1 and AmpC in 2 isolates, TEM-1 and OXA-30 in 1 isolate, TEM-1 and OXA-33 in 1 isolate, TEM-1, CTX-M-3, and AmpC in 1 isolate, but SHV was not detected. Antimicrobial resistance genes were transferred to animal isolate of E. coli (CCARM No. 1203) by the filter mating method. Extended spectrum $\beta-lactamase$ producers studied in the current study have low correlation to each other as determined by random amplified polymorphic DNA and pulsed field gel elec­trophoresis. This is a contradictory result from the general hypothesis that extended-spectrum $\beta-lactamase$ pro­ducers in one hospital is a result from a clonal spread.

• Journal of Bio-Environment Control
• /
• v.14 no.2
• /
• pp.95-105
• /
• 2005

This study was carried out to file up using effect and requirement of energy for environmental design data of Pleurotus eryngii growing houses. Heating and cooling Degree-Hour (D-H) were calculated and compared for. some Pleurotus eryngii growing houses of sandwich-panel (permanent) o. arch-roofed(simple) type structures modified and suggested through field survey and analysis. Also thermal resistance (R-value) was calculated for the heat insulating and covering materials of the permanent and simple-type, which were made of polyurethane or polystyrene panel and $7\~8$ layers heat conservation cover wall. The variations of heating and cooling D-H simulated for Jinju area was nearly linearly proportional to the setting inside temperatures. The variations of cooling D-H was much more sensitive than those of heating D-H. Therefore, it was expected that the variations of required energy in accordance with setting temperature or actual temperature maintained inside of the cultivation house could be estimated and also the estimated results of heating and cooling D-H could be effectively used far the verification of environmental simulation as well as for the calculation of required energy amounts. When the cultivation floor areas are all equal, panel type houses to be constructed by various combinations of materials were found to by far more effective than simple type pipe house in the aspect of energy conservation maintenance except some additional cost invested initially. And also the energy effectiveness of multi-span house compared to single span together with the prediction of energy requirement depending on the level insulated for the wall and roof area could be estimated. Additionally, structural as well as environmental optimizations are expected to be possible by calculating periodical and/or seasonal energy requirements for those various combinations of insulation level and different climate conditions, etc.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.649-653
• /
• 2009

"Cheongan" is a new japonica rice variety developed from a cross between SR15225-B-22-1-2-1 and Iksan431 in summer season, 1997 by National Institute of Crop Science, RDA. The line SR15225-B-22-1-2-1 has good canopy architecture and multi-disease and insect resistance, and Iksan431 has translucent milled rice and good eating-quality. Heading date of Cheongan is August 13 in central lowland and mid-mountainous areas. "Cheongan" having culm length of 84 cm shows relatively semi-erect pubescent leaf blade and rigid culm, tolerance to lodging with and good canopy architecture. This variety has 14 tillers per hill and 126 spikelets per panicle. It shows tolerance to heading delay and spikelet sterility comparable to Hwaseongbyeo when exposed to cold stress. Leaf senescence of Cheongan progresses slowly during the ripening stage and the viviparous germination ratio was 59 %, similar to that of Hwaseongbyo. "Cheongan" shows moderately resistance to blast disease, but susceptible to stripe virus and brown planthopper. The milled rice of "Cheongan" exhibits translucent, clear non-glutinous endosperm and medium short grain. It shows similar amylose content of 18.7%, gelatinization temperature, and similar palatability of cooked rice compared to Hwaseongbyeo. The milled rice yield of this cultivar is about 5.54 MT/ha at ordinary season culture in local adaptability test for three years. Especially, "Cheongan" has better milling properties of higher 98.4% and 73.9% in the percentage of head rice in milled rice and milling recovery of head rice, respectively, than those of Hwaseongbyeo. "Cheongan" could be adaptable to the central and mid-southern plain area, and mid-western coastal area of Korea.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.347-355
• /
• 2021

During the earthquake, for multi-story structure, if the first floor is soft, the deformation will concentrate on that floor causing a serious damage to the column members which might leads to the collapse of the whole structure like Piloti structure during the Pohang earthquake in Korea. According to the 2016 National Disaster Management Research Institute's "Investigation of Seismic Reinforcement and Cost Analysis of Domestic Non-seismic Buildings", the rate of seismic resistance of private reinforced concrete buildings was 38.3 %. Among them, it was reported that the seismic-resistance ratio of the two to five-story structures was less than 50 %. Accordingly, the government is trying to improve the seismic rate through support projects, but the conventional seismic reinforcement methods are still expensive, and emergency construction is difficult. Therefore, in this study, the field applicability was evaluated by improving the reinforcement method using Velcro, which was developed through the research project of the Ministry of Land, Transport and Maritime Affairs in 2014. In order to improve the performance of the Velcro reinforcement method, introducing the initial tension of Velcro using high foaming rigid urethane filling between the Velcro and concrete of the columns was applied. Additionally, an experiment was conducted to evaluate the ductility of Velcro specimen from the concrete confinement effect. As a result, the ductility of the Velcro specimen was improved compare to Normal specimen. However, the energy dissipation capacity of VELCRO2 is better than VELCRO1, yet the maximum ductility of those two specimens did not show a significant difference. Therefore, the improvement of the internal filler material is still needed to have a better maximum ductility.

• Korean Journal of Breeding Science
• /
• v.43 no.6
• /
• pp.576-580
• /
• 2011

'Keunseom', a new second generation Tongil-type rice variety (Oryza sativa L.), is a mid-maturing ecotype developed by the rice breeding team of Department of Functional Crop, NICS, RDA in 2006. This variety was originated from a cross between 'Dasanbyeo' and 'Namyeongbyeo' in 1996's summer season, which developed by pedigree breeding method. The pedigree of 'Keunseom' was YR18234-B-B-98-3-5-1, and it was designated 'Milyang202' in 2002. 'Keunseom' has tolerance to lodging, because it has short culm length as 77 cm. This variety is resistance to bacterial blight K1 race, rice stripe virus, rice dwarf virus, and leaf blast disease. Milled rice kernel of 'Keunseom' is a clean translucent with non-glutinous endosperm, and has good quality as it was clear in chalkness. The milled rice yield potential of 'Keunseom' was about 719 kg/10a at ordinary fertilizer level of local adaptability test. This cultivar would be adaptable to the mid and southern plain of Republic of Korea.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.533-536
• /
• 2008

Hopum is a new japonica rice cultivar developed from the cross between Milyang165 and F1 crossing Milyang165 and Iksan438 at Department of Rice and Winter Cereal Crop, NICS, RDA, in 2006. This cultivar has a short grain shape and about 141 days growth duration from direct seeding to harvesting in the southern plain including Chungcheong province. This cultivar has short culm and spikelet number per panicle is similar to that of Nampyeongbyeo, while filled grain rate is lower than standard variety. This cultivar has medium size of brown rice and shows moderate resistance to leaf blast, to bacterial blight pathogens of $K_1$, $K_2$ and $K_3$ and stripe virus disease but susceptible to major virus diseases and insect pests. The milled kernel of Hopum is translucent with non-glutinous endosperm. Protein and amylose content of Hopum is about 6.5% and 18.7%, respectively. This cultivar has better palatability of cooked rice than Chucheongbyeo harvested in Gyeongki province. Its milling recovery (76.8%) and percentage of perfect-shaped milled rice (94.7%) were higher than Nampyeongbyeo. The milled rice yield of Hopum was 5.83 MT/ha (15% higher than Juan) under wet-direct seeding, 5.66 MT/ha (8% higher than Juan) under dry-direct seeding, and 6.00 MT/ha (8% higher than Nampyeong) under ordinary transplanting cultivation. "Hopum" would be adaptable for ordinary transplanting and direct seeding in the southern plain including Chungcheong province.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.208-221
• /
• 2007

The fracture toughness test is believed as a clinically relevant method for assessing the fracture resistance of the dentinal restoratives. The objectives of this study were to measure the fracture toughness $(K_{1C})$ and microtensile bond strength of dentin-resin composite interface and compare their relationship for their use in evaluation of the integrity of the dentin-resin bond. A minimum of six short-rod specimens for fracture toughness test and fifteen specimens for microtensile bond strength test was fabricated for each group of materials used. After all specimens storing for 24 hours in distilled water at $37^{\circ}C$, they were tensile-loaded with an EZ tester universal testing machin. Statistical analysis was performed using ANOVA and Tukey's test at the 95% confidence level, Pearson's coefficient was used to verify the correlation between the mean of fracture toughness and microtensile bond strength. FE-SEM was employed on fractured surface to describe the crack propagation. Fracture toughness value of Clearfil SE Bond (SE) was the highest, followed by Adper Single Bond 2 (SB), OptiBond Solo (OB), ONE-STEP PLUS (0S), ScotchBond Multi-purpose (SM) and there was significant difference between SE and other 4 groups (p < 0.05). There were, however, no significant difference among SB, OB, OS, SM (p > 0.05). Microtensile bond strength of SE was the highest, followed by SB, OB, SM, OS and OS only showed significant lower value (p < 0.05). There was no correlation between fracture toughness and microtensile bond strength values. FE-SEM examination revealed that dentin bonding agent showed different film thickness and different failure pattern according to the film thickness. From the limited results of this study, it was noted that there was statistically no correlation between K1C and ${\mu}TBS$. We can conclude that for obtaining the reliability of bond strength test of dentin bonding agent, we must pay more attention to the test procedure and its profound scrutiny.

• Tuberculosis and Respiratory Diseases
• /
• v.64 no.1
• /
• pp.8-14
• /
• 2008

Background: Acinetobacter infections are difficult to treat as they often exhibit multiple resistance to the antibiotics that are currently available for the treatment of pneumonia. Colistin is active against gram-negative bacteria, including the multiple drug resistant (MDR) Acinetobacter species. However, intravenous administration of colistin was abandoned because of its nephrotoxicity and neurotoxicity. The aims of this study were to examine the efficacy and safety of colistin administered by aerosol in the treatment of pneumonia caused by MDR Acinetobacter baumannii. Methods: We retrospectively reviewed the medical records of patients admitted to the intensive care unit (ICU) from Dec. 2006 to Aug. 2007 who had been diagnosed as suffering from pneumonia due to MDR Acinetobacter baumannii and had been treated with nebulized colistin. Results: 31 patients received aerosolized colistin. The average duration of the treatment was $14{\pm}7$ days and the daily dose of ranged from 225 mg to 300 mg. All patients received concomitant intravenous antimicrobial agents. The average length of the stay in the ICU was $34{\pm}21$ days and in the hospital $58{\pm}52$ days. The overall microbiological eradication was observed in 25 patients (80.6%). 14 of these (56%) were cured, and 11 (44%) were infected with other microorganisms. The overall crude mortality of the ICU was 48%. Nephrotoxicity and significant bronchial constriction did not occur in any patient during neublized colistin treatment. Conclusion: Nebulized colistin may be a safe and effective option in the treatment of pneumonia due to MDR Acinetobacter baumannii. Its role in therapy warrants further investigation in comparative studies.

• Journal of the Korean Vacuum Society
• /
• v.14 no.2
• /
• pp.78-83
• /
• 2005

Nanometric crystalline silicon (no-Si) embedded in dielectric medium has been paid attention as an efficient light emitting center for more than a decade. In nc-Si, excitonic electron-hole pairs are considered to attribute to radiative recombination. However the surface defects surrounding no-Si is one of non-radiative decay paths competing with the radiative band edge transition, ultimately which makes the emission efficiency of no-Si very poor. In order to passivate those defects - dangling bonds in the $Si:SiO_2$ interface, hydrogen is usually utilized. The luminescence yield from no-Si is dramatically enhanced by defect termination. However due to relatively high mobility of hydrogen in a matrix, hydrogen-terminated no-Si may no longer sustain the enhancement effect on subsequent thermal processes. Therefore instead of easily reversible hydrogen, phosphorus was introduced by ion implantation, expecting to have the same enhancement effect and to be more resistive against succeeding thermal treatments. Samples were Prepared by 400 keV Si implantation with doses of $1\times10^{17}\;Si/cm^2$ and by multi-energy Phosphorus implantation to make relatively uniform phosphorus concentration in the region where implanted Si ions are distributed. Crystalline silicon was precipitated by annealing at $1,100^{\circ}C$ for 2 hours in Ar environment and subsequent annealing were performed for an hour in Ar at a few temperature stages up to $1,000^{\circ}C$ to show improved thermal resistance. Experimental data such as enhancement effect of PL yield, decay time, peak shift for the phosphorus implanted nc-Si are shown, and the possible mechanisms are discussed as well.