• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.12
• /
• pp.5015-5027
• /
• 2015

Transceiver optimization in multiple input multiple output (MIMO) cognitive systems is studied in this paper. The joint transceiver beamformer design is introduced to minimize the transmit power at secondary base station (SBS) while simultaneously controlling the interference to primary users (PUs) and satisfying the secondary users (SUs) signal-to-interference-plus-noise ratio (SINR) based on the convex optimization method. Due to the limited cooperation between SBS and PUs, the channel state information (CSI) usually cannot be obtained perfectly at the SBS in cognitive system. In this study, both perfect and imperfect CSI scenarios are considered in the beamformer design, and the proposed method is robust to CSI error. Numerical results validate the effectiveness of the proposed algorithm.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.60.1-60.1
• /
• 2011

We present the preliminary results of the pilot observations for the fringe survey at 43 GHz with the VLBI Exploration of Radio Astrometry (VERA). The main goals of the fringe survey are to establish a full list of phase calibrators for the VERA dual-beam astrometric observations, and for the KVN multi-frequency phase referencing observations. We performed two 24 hours experiments as a pilot observation to test the feasibility of the fringe survey. Each source from a list of 220 sources has been observed in one scan for 2 minutes. 67 sources were detected with the SNR threshold of 3.5. The correlated flux densities of the detected sources are presented in four ranges of projected baseline lengths.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6B
• /
• pp.593-600
• /
• 2002

The reverse link signal power required for multimedia traffic in multipath faded single-code (SC-) and multi-code CDMA (MC-CDMA) systems is investigated. The effect of orthogonality loss among multiple spreading code channels is herein characterized by the orthogonality factor. The required signal power in both the CDMA systems is then analyzed in terms of the relative required signal power ratio of data to voice traffic. The effect of varying system parameters including spreading bandwidth, the of orthogonality factor, and the number of spreading codes are examined. Analytical results show that MC-CDMA users transmitting only a single traffic type require significantly more power than SC-CDMA users with only a single traffic type. On the other hand, MC-CDMA users transmitting multimedia traffic require power levels approximately identical to SC-CDMA users with multimedia traffic. The results can be used in the design of radio resource management (e.g., power allocation) scheme for wireless multimedia services.

• Journal of electromagnetic engineering and science
• /
• v.6 no.3
• /
• pp.176-181
• /
• 2006

Signal distortion due to the path loss, shadow, and multi-path fading is very serious in radio channel. In this paper, we propose CDMA-OFDM cooperative communication system based on DFP(Decode and Forward Protocol) to overcome these phenomena using spread spectrum technique, orthogonal sub-carrier, and the space diversity. We simulated proposed system under Rayleigh flat fading channel environment. A variety of simulation results reveal the cooperation can provide performance gain of up to 12 dB over direct communications in ideal inter-user case at BER of $10^{-3}$. And we can also confirm variation of diversity effect as channel environment changes.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.4
• /
• pp.173-178
• /
• 2015

In lieu of the excellent radio frequency (RF) performance of microelectromechanical system ( MEMS) switches, these micro switches need higher actuation voltage for their operation. This requirement is secondary to concerns over the swtiches’ reliability. This paper reports high reliability operation of RF MEMS switches with low voltage requirements. The proposed switch is optimised to perform in the Q-band, which results in actuation voltage of just 16.4 V. The mechanical stress gradient in the thin micro membrane is computed by simulating von Mises stress in a multi-physics environment that results in 90.4 MPa stress. The computed spring constant for the membrane is 3.02 N/m. The switch results in excellent RF performance with simulated isolation of above 38 dB, insertion loss of less than 0.35 dB and return loss of above 30 dB in the Q-band.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.177-178
• /
• 2006

The real-time tracking system is an essential factor for the development of low cost sensor networks for use in pervasive computing and ubiquitous networking. In this paper, we address the interference problems of the sensor network platform with ultrasonic for location tracking system. Ubiquitous indoor environments often contain substantial amounts of metal and other such reflective materials that affect the propagation of radio frequency signals in non-trivial ways, causing severe multi-path effects, dead-spots, noise, and interference. Especially we present a novel reducing interference location system that is particularly well suited to support context-aware computing. The system called Pharos, aims to combine the advantages of real-time tracking systems that implement distributed environment with regardless of infrastructure or infrastructure-less wireless sensor networks.

• IEIE Transactions on Smart Processing and Computing
• /
• v.2 no.4
• /
• pp.208-215
• /
• 2013

Early iterations of the existing Global Positioning System (GPS)-based or radio lateration technique-based vehicle localization algorithms suffer from flip ambiguities, forged relative location information and location information exchange overhead, which affect the subsequent iterations. This, in turn, results in an erroneous neighbor-vehicle map. This paper proposes an extended information overlap measure (EIOM) algorithm to reduce the flip error rates by exchanging the neighbor-vehicle presence features in binary information. This algorithm shifts and associates three pieces of information in the Moore neighborhood format: 1) feature information of the neighboring vehicles from a vision-based environment sensor system; 2) cardinal locations of the neighboring vehicles in its Moore neighborhood; and 3) identification information (MAC/IP addresses). Simulations were conducted for multi-lane highway scenarios to compare the proposed algorithm with the existing algorithm. The results showed that the flip error rates were reduced by up to 50%.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.49.2-49.2
• /
• 2013

We present a result of $^{13}CO$(1-0) survey toward the Outer Galactic Plane using the multi-beam receiver system recently installed on the 14 m telescope at Taeduk Radio Astronomy Observatory(TRAO). Our target region is from l=$120^{\circ}$ to $133^{\circ}$ and b=$-1^{\circ}$ to $+1^{\circ}$, and some extended regions are included where emission is still arising. All data are on 50" grid. Velocity resolution is 0.63 km/sec, and the total velocity range is from -150 km/sec to 100 km/sec. A total of 140,000 spectra were obtained. The rms noise is about 0.18 K per channel for unsmoothed raw data. We will present a few initial results of the survey database.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.4
• /
• pp.439-449
• /
• 1998

In this paper, error performance of DS-CDMA communication system has been analyzed in a radio channel which is characterized by multi-user interference (MUI). Also, performance improvement has been obtained by both numerical analysis and simulation techniques when 3-element array antenna and co-channel interference (CCI) canceller are employed as a means for overcoming an MUI effect. The MUI was modelled as a gaussian random process. In array antenna scheme we only considered a directivity of antennal. The results show that there is a substantial enhancement in performance by employing an array antenna or a CCI canceller. CCI canceller gives better improvement in performance than the array antenna with D=2.67. Additional improvement can be obtained when the array antenna and the CCI canceller are adopted in cascade form. In this case the error performance approaches that of AWGN environment.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.247-250
• /
• 2003

Mobile wire technology is a publicly available general purpose for Radio Frequency(RF) communication for short-range and point-to-multi point voice and data transfer. In this paper, we proposed a new technology of the synchronized frame structure which is based on the CDMA technique, and it's implemented into the VLSI design by FPGA. The developmental technique consists of an assigned coded type mobile communication equipments and available local mobile or wireless communication scheme quasi BT(Blue Tooth)'s functions as multiplexer or do-multiplexer for each other applications. We implement this architecture with special proposed frame structure in the local area network. Also, we expect the above proposed structure extend into the DS3 network architecture and applicable to the TE(Terminal Equipment) in the local communication area and the other one etc.