• 한국재료학회지
• /
• 제29권5호
• /
• pp.277-281
• /
• 2019

The objective of this research is to evaluate the effect of adhesive types on dimensional stability of bamboo-oriented particleboard. The materials used in this research are bamboo tali(Gigantochloa apus J.A & J.H. Schult. Kurz), UF/MDI(8, 10, 12 % level), and MF, MDI, and PF at 7 % level. Particle and adhesive are mixed using a blending machine; then, mat forming and hot pressing processes are performed using adhesive-suitable temperature and time references. MDI resin is set at $160^{\circ}C$ temperature for 5 minutes. PF resin and MF resin are pressed at $170^{\circ}C$ for 10 minutes, and $140^{\circ}C$ for 10 minutes, respectively, while UF/MDI sets at temperature of $140^{\circ}C$ for 10 minutes. The results show that particleboard using PF resin produces the lowest thickness swelling value. The particleboard using UF/MDI resin also produces good response for thickness swelling value. Interesting things happen in that UF/MDI adhesive produces a thickness swelling value better than that of MDI resin. FTIR analysis on particleboard bonded by UF/MDI resin combination shows the presence of carbonyl group C=O vibration on multi substitution of urea at wave number of around $1,700cm^{-1}$.

• 한국산학기술학회논문지
• /
• 제16권12호
• /
• pp.8933-8939
• /
• 2015

본 논문에서는 효율성 및 사용자 편리성을 극대화 할 수 있는 전시공연을 위한 멀티 소형 휴머노이드 로봇제어 방법을 설계 및 구현 하였다. 근래에는 공연과 전시분야에도 로봇을 활용하는 사례가 늘고 있으며, 연극, 뮤지컬, 오케스트라 공연 등 장르 또한 다양하다. 기존의 소형 휴머노이드를 이용한 전시공연에서는 컴퓨터 및 MP3 플레이어 등을 이용하여 외부에서 음원을 재생과, 동시에 로봇의 공연시작을 위한 통신장비의 시작 버튼을 눌러줌으로 공연을 시작하였다. 이처럼 이원화된 음원과 로봇 동작과의 동기화로 인하여 음원시작시점과 로봇의 공연 시작 시점의 동기화가 잘 이루어지지 않아 로봇의 동작과 음원이 따로 재생되어 공연을 재시작 해야 하는 경우가 빈번히 발생하였다. 또한 공연 도중 로봇이 무게중심을 잃거나 했을 때 사람이 공연에 개입하거나 공연을 재시작 해야 하는 등의 문제점이 존재하였다. 이를 개선하기 위해서, 본 논문에서는 멀티 소형 휴머노이드 로봇제어의 효율성 향상 및 사용자의 편리성을 극대화할 수 있는 GUI 기반의 휴먼 인터페이스 S/W를 설계하였으며, 다수의 소형 휴머노이드에 데이터를 전송하기 위하여 지그비 통신을 사용하였다. 또한, 다수의 소형 휴머노이드 로봇을 대상으로 실제 구현함으로써 효율성 및 사용자의 편리성에 대한 타당성을 입증하였다.

• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.687-693
• /
• 2004

Composite membranes with a titania layer were prepared by soaking-rolling method with the titania sol of nanoparticles formed in the sol-gel process and investigated regarding the vapor permeation of various organic mixtures. The support modification was conducted by pressing $SiO_2$ xerogel of 500 nm in particle size under 10 MPa on the surface of a porous stainless steel (SUS) substrate and designed the multi-layered structure by coating the intermediate layer of ${\gamma}-Al_2O_3$. Microstructure of titania membrane was affected by heat-treatment and synthesis conditions of precursor sol, and titania formed at calcination temperature of 300$^{\circ}C$ with sol of [$H^+$]/[TIP]=0.3 possessed surface area of 210 $m^2$/g, average pore size of 1.25 nm. The titania composite membrane showed high $H_2/N_2$ selectivity and water/ethanol selectivity as 25-30 and 50-100, respectively. As a result of vapor permeation for water-alcohol and alcohol-alcohol mixture, titania composite membrane showed water-permselective and molecular-sieve permeation behavior. However, water/methanol selectivity of the membrane was very low because of chemical affinity of permeants for the membrane by similar physicochemical properties of water and methanol.

• 한국운동역학회지
• /
• 제26권1호
• /
• pp.93-99
• /
• 2016

Objective: The purpose of this study was to investigate the effect of transcutaneous electrical nerve stimulation (TENS) treatment on maximum voluntary force (MVF) production. Methods: Ten healthy, young subjects (5 males and 5 females) participated in the study. MVF was recorded after a fifteen minute session of TENS stimulation under two conditions: low frequency (4 Hz) at maximum tolerable level and high frequency (110 Hz) at maximum tolerable level. TENS was provided simultaneously via self-adhesive electrodes placed on the finger pads of the index, middle, ring and little fingers. MVF was also recorded in a baseline condition with no TENS treatment. Data were collected in three different sessions on three consecutive days at the sametime of the day. Results: Results from the study show that on an average, MVF increasesby 25% for the index, middle and little fingers for TENS treatment with 4 Hz frequency as compared to the baseline condition. However, the 110 Hz condition did not result in a significantly different MVF than the baseline condition during individual finger pressing tasks. In addition, while producing MVF with all the four finger stogether, MVF was 30% higher for the 4 Hz conditionin comparison to the baseline condition, and 15% higher for the 110 Hz condition in comparison to the baseline condition respectively. Conclusion: The results suggest that stimulation ofafferent fibers onthe glabrous skinwith TENS could have a net facilitatory effect on the maximum motoroutput.

• 한국기계가공학회지
• /
• 제20권5호
• /
• pp.76-84
• /
• 2021

In this study, an optimal stiffness model of the C-frame, which was supporting the mold and tool load, was proposed to obtain quality self-piercing riveting (SPR) joining. First, the load path acting on the C-frame structure was identified using topology optimization. Then, a final suggested model was proposed based on the load path results. Stiffness and strength analyses were performed for a rivet pressing force of 7.3 [t] to compare the design performance of the final proposed model with that of the initial model. Moreover, to examine the reliability of continuous and repeated processes, vibration analysis was performed and the dynamic stiffness of the final proposed model was reviewed. Additionally, fatigue analysis was performed to ascertain the fatigue characteristics due to simple repetitive loading. Finally, stiffness test was performed for the final proposed model to verify the analysis results. The obtained results differed from the analysis result by 2.9%. Consequently, the performance of the final proposed model was superior to that of the initial model with respect to not only the SPR fastening quality but also the reliability of continuous and repetitive processes.

• 마이크로전자및패키징학회지
• /
• 제31권1호
• /
• pp.7-15
• /
• 2024

유연신축성 전자 디바이스의 다기능화, 소형화 및 고출력화 추세에 따라 우수한 열 전달 특성을 갖춘 재료나 구조가 이슈로 부상하고 있다. 기존의 열계면 소재는 급격한 구부림, 비틀림, 신축 등을 겪어야 하는 유연신축성 전자 디바이스의 방열 요구성능을 충족시키지 못한다. 이러한 문제를 해결하기 위하여 높은 열전도성과 신축성을 동시에 갖는 열계면 소재 개발이 요구된다. 본 논문에서는 Liquid metal, Carbon, Ceramic 기반 신축성 열계면 소재의 연구동향을 살펴보고 열적, 기계적 특성 향상을 위한 효과적 전략을 알아보고자 한다.

• 대한전자공학회논문지TC
• /
• 제43권7호
• /
• pp.93-103
• /
• 2006

컨텐츠를 기반으로 인터넷 웜등의 유해 패킷을 네트워크에서 차단하는 기술은 탐지의 정확도와 네트워크 성능의 한계 극복 이라는 두 가지 문제에 초점이 맞추어져 있다. 특히 멀티 기가비트 성능을 기본으로 하는 현재의 전달 네트워크에서 고속으로 웜 트래픽을 차단하는 능력이 주요 이슈로 대두되고 있다. 본 논문은 라우터 혹은 방화벽과 같은 통신 및 보안 장비에 주요 기술로 사용되는 네트워크 프로세서 환경에서 멀티 기가비트 수준으로 고속 원 필터링이 가능한 구현 구조를 제안한다. 고속 원 필터링을 위한 설계의 특징으로는 네트워크 프로세서가 가지는 내부 레지스터와 메모리의 자원 한계점을 극복하기 위하여 Bloom Filter를 활용하였고, 특히 버퍼 오버플로우 기법을 이용하는 웹들에 대해 단순 패턴매칭 뿐만 아니라, 유해 코드의 길이 검사를 수용할 수 있는 구조로 시그너처 관리가 확장 가능하도록 설계되었다. 설계된 고속 웜-필터링 구조를 기가비트 이더넷 인터페이스를 가진 Intel IXP 네트워크 프로세서 플랫폼에서 마이크로 코드형태로 구현하였고, 알려진 원들이 포함된 트래픽을 사용하여 그 성능을 분석하였다.

• 한국식품영양학회지
• /
• 제21권4호
• /
• pp.477-484
• /
• 2008

The Pacific saury, Cololabis saira Kwamaegi, is a traditional local food of the Eastern sea area, centered around Pohang. It is well-recognized as being both tasty and nutritious. Nevertheless, bacterial contamination, excessive dryness, and compositional changes render this fish edible only during the winter months. Thus, to improve its storage capabilities, this study assessed the effects of storage material, type, temperature, and duration on compositional changes in Kwamaegi. The assessed samples were Kwamaegi which had been naturally dried for 15 days. The storage materials included an A-film, a self- developed multi-film made of polyethylene, polyamide, EVOH, and polyethylene, and a B-film made of polyethylene, nylon, polyethylene, nylon, and polyethylene. The B films were utilized after pressing and lamination. The storage types included one whole fish(1G), or 2 divided fish(2G), to increase eating convenience. The 2G type was the muscle portion divided vertically after discarding the jowl, skin, and internal organs. The storage temperatures were 0, -15 and $-30^{\circ}C$, and the storage durations were 2, 4, and 6 months. Among the lipid rancidities, acid value and peroxide value showed the highest level of initial rancidity at a storage temperature of $0^{\circ}C$ for 2 months. We noted no significant differences between storage materials. The lower the storage temperatures, the less acid and peroxide were generated. Between the storage types, 1G evidenced lower less acid values than 2G. The TBA values revealed a dramatic increase at a storage temperature of $0^{\circ}C$ for 2 months, whereas this rapid progress was not observed at storage temperatures of -15 and $-30^{\circ}C$. Along with the acid value and peroxide value, the samples stored at 0, -15 and $-30^{\circ}C$ evidenced significantly lower TBA values. The B-film evidenced a slightly lower TBA value than was observed in the A-film, but no significant differences were observed.

• Journal of the Korean Wood Science and Technology
• /
• 제24권4호
• /
• pp.56-63
• /
• 1996

This study was to manufacture thinned wood of Larix leptolepis Gordon into Oriented Strand Board(OSB) with Urea-Formaldehyde Resin. The OSB was made of four kinds of strand in slenderness ratio 150 ; thickness $0.3{\pm}0.05mm$, $0.4{\pm}0.05mm$, $0.5{\pm}0.05mm$ and $0.6{\pm}0.05mm$, respectively length 45mm, 60mm, 75mm and 90mm. Target densities were 0.65gr/$cm^3$, 0.75gr/$cm^3$ and 0.85gr/$cm^3$. The stepwise 9 minutes-multi-pressing schedule in the maximum pressure 40kgf/$cm^2$, the minimum pressure 10kgf/$cm^2$ was applied for $400mm{\times}390mm{\times}12mm$ board at the temperature of $150^{\circ}C$ in a hot press. In MOR The OSB of thin strand thickness $0.3{\pm}0.05mm$(length 45mm) and density 0.85gr/$cm^3$ was the highest. The strand thickness had more effect on MOR than the strand length. In strand thickness $0.4{\pm}0.05mm$(length 60mm) and density 0.85gr/$cm^3$ was the highest MOE. The strand thickness and length had adverse effects on MOE each other. At internal bonding. The OSB of strand thickness $0.3{\pm}0.05mm$(length 45mm) and board density 0.75gr/$cm^3$ showed the highest value. OSB had higher IB value with thinner strand thickness. The thinner strand thickness showed the lower thickness swelling in turn $0.3{\pm}0.05mm$(length 45mm), $0.4{\pm}0.05mm$(length 60mm), $0.5{\pm}0.05mm$(length 75mm). $0.6{\pm}0.05mm$(length 90mm). Target densities 0.75gr/$cm^3$ 0.65gr/$cm^3$, 0.85gr/$cm^3$ showed in turn lower value. Finally, The OSB made of thinned wood of Larix leptolepis Gordon showed good results in laboratory experiment.

• 한국식품영양학회지
• /
• 제21권2호
• /
• pp.165-175
• /
• 2008

Pacific saury, Cololabis saira kwamaegi, is a traditional local food of the Eastern sea area centering around Pohang. It is well-recognized as being both tasty and nutritious. Nevertheless, bacterial contamination, excessive dryness, and compositional changes have made it edible only during the winter months. Therefore, to improve its storage, this study examined the effects of storage material, type, temperature, and duration on compositional changes in kwamaegi. The studied samples were kwamaegis that had been dried naturally for 15 days. The storage materials included an A-film, a self-developed multi-film made of polyethylene, polyamide, EVOH, and polyethylene; as well as a B-film made of polyethylene, nylon, polyethylene, nylon and polyethylene. The B films were used after pressing and laminating. The storage types included one whole fish(1G), or 2 divided fish(2G), to increase eating convenience. The 2G type was the muscle portion divided vertically after discarding the jowl, skin, and internal organs. The storage temperatures were $0^{\circ}C$, $-15^{\circ}C$, and $-30^{\circ}C$, and the storage durations were 2, 4, and 6 months. Pathogenic bacteria and rheology were measured to observe general compositional changes. The whole kwamaegi showed a total cell number of $1,565{\pm}112$ CFU/100 g flesh, while the divided Kwamaegi showed significantly greater bacterial numbers at $2,031{\pm}145$ CFU/100 g flesh. Psychrophils and halophils increased significantly while coliform were not found; the number of mesophils also increased, but not significantly. There were no significant cell number variations between the A-film and B-film. At $0^{\circ}C$, both the A-and B-films resulted in cell numbers of $115{\sim}212$ CFU/100 g flesh, revealing just $7.3{\sim}10.4%$ of the initial storage levels. Overall, there were no significant differences between the storage materials. Generally, as the storage temperature and duration increased, the moisture content of the kwamaegi decreased. Also, as storage duration and temperature increased, crude protein and crude lipid contents increased; in addition, they increased proportionally as the moisture content of the fish decreased. There were no significant differences in crude ash content with respect to the storage materials, storage temperatures, or storage durations. Finally, there were no significant differences between the kwamaegi samples naturally dried for 15 days and those stored in the B-film vacuum storage for 6 months for strength, hardness, cohesiveness, springiness, gumminess, and water activity.