• Environmental Analysis Health and Toxicology
• /
• v.23 no.3
• /
• pp.171-178
• /
• 2008

수백여 종의 개별물질이 불완전 연소 혹은 유기물의 열분해로 인해 발생되는 다환방향족 탄화수소(PAHs)는 환경에서 중요한 오염원이 되고 있다. 본 연구는 다양한 바이오마커를 이용하여 수서생태계에 벤조피렌(benzo[a]pyrene)과 같은 다환방향족 탄화수소의 영향을 분석하였고, 이에 대한 통합적 결과 모델을 도출하였다. 즉, 잉어(Cyprinus carpio)를 이용하여 여러 농도의 벤조피렌(3, 12, $34{\mu}g/L$, 측정농도 기준)에 10일간 노출시킨 다음, DNA single-strand break, ethoxyresorufin-O-deethylase (EROD), acetylcholine esterase (AChE)와 vitellogenin (VTG)의 농도를 측정하였다. 벤조피렌은 잉어의 DNA 손상을 유도하였고, 낮은 농도에서 EROD와 VTC의 유의적인 활성을 보였으나, 신경전달물질과 관련이 깊은 AChE 효소활성에는 영향을 미치지 않았다. 이 결과를 star plot를 이용하여 통합 및 분석하였으며, 노출농도에 따른 통합 반응지수(integrated biomarker response value: IBR)로 나타내었다. 이런 다양한 바이오마커의 결과들은 벤조피렌에 대한 어류의 영향과 수생태 모니터링 자료로 이용 가능할 것으로 여겨지며, 통합반응지수는 생태위해성평가에서 유용한 도구로 쓰일 가치가 있는 것으로 평가된다.

• Human Ecology Research
• /
• v.54 no.1
• /
• pp.13-26
• /
• 2016

The purpose of this paper is to investigate the rationale behind the transformation process of unique shophouse spatial organization in Phnom Penh. We selected 20 representative shophouses located in the Chinese district of Phnom Penh according to construction period. A qualitative study methodology was applied and field surveys were conducted that included interviews with residents, photographs, sketches, measurements, collecting historic photos, and cataloging maps. Selected cases were analyzed in terms of: basic house data, urban block analysis, and unit analysis. Cases were then classified into two types: private courtyard shophouse (PCS) and shared courtyard shophouse (SCS). PCS refers to shophouse typology that maintains most of the characteristics of early shophouses while being transformed into a modern multi-story apartment within a limited one bay plot. However, SCS refers to shophouses adapted from the indigenous forms of PCS that evolved into a multi-storey and multi-family housing typology that includes features that might have been adapted from Western apartment buildings such as sharing a big courtyard, staircase and corridors. We conclude that shophouses in Phnom Penh have positively adopted a Western building typology, adapted it to local traditions, and finally formulated a new building type that represent indicators of a modernization process gradually accepted by society.

• Membrane and Water Treatment
• /
• v.2 no.2
• /
• pp.105-119
• /
• 2011

This study presents the tests of an Immersed Membrane BioReactor (IMBR) equipped with a draft tube and focuses on the influence of hydrodynamic conditions on membrane fouling in a pilot-scale using a hollow fiber membrane module of ZW-10 under ambient conditions. In this system, the cross-flow velocities across the membrane surface were induced by a cylindrical draft-tube. The relationship between cross-flow velocity and aeration strength and the influence of the cross-flow on fouling rate (under various hydrodynamic conditions) were investigated using Multi-Dimension Scaling (MDS) analysis. MDS technique is especially suitable for samples with many variables and has relatively few observations, as the data about Membrane Bio-Reactor (MBR) often is. Observations and variables are analyzed simultaneously. According to the results, a specialized form of MDS, CoPlot enables presentation of the results in a two dimensional space and when plotting variables ratio (output/input) rather than original data the efficient units can be visualized clearly. The results indicate that: (i) aeration plays an important role in IMBR performance; (ii) implementing the MDS approach with reference to the variables ratio is consequently useful to characterize performance changes for data classification.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.04a
• /
• pp.159-168
• /
• 1999

In seismic analysis, there are two main ways - uniform load method and dynamic analysis, dynamic analysis can be divided into response spectrum analysis and time history analysis. In case of which get the complexion of the vibration with 3-axis of coordinate direction in each mode of free vibration mode happened owing to complication of the shape, 3-dimensional dynamic analysis is recommended to perform as multi-mode spectral analysis in standard specification for highway bridge. The purpose of this study is to understand the dynamic behavior by performing multi-mode seismic analysis according to responses analysis and time history anal)'sis in using record of earthquake. In accordance with the criterion of seismic design as defined in standard specification for highway bridge by using modified records of the El Centre and Coyote Lake earthquake, response spectrum was constructed by using the tripartite logarithmic plot. The 3-span continuous space truss bridge was selected as model of numerical analysis. As the result performed time history analysis and analysis of response spectrum for the model of numerical analysis, the result of time history analysis was slightly larger than that of response spectrum analysis. This coincide with the tendency of the result came from the analysis when using a jagged response spectrum analysis, This coincide with the tendency of the result came from the analysis when using a jagged response spectrum for a single excitation. In the Process of performing these two analysis. response spectrum analysis is more effective than time history analysis in saving times in analyzing data.

• Journal of Welding and Joining
• /
• v.32 no.1
• /
• pp.53-60
• /
• 2014

The automatic arc welding is generally accepted as the preferred joining technique and commonly chosen for assembly of large metal structures such as in areas of automotive, aircraft and shipbuilding due to its joint strength, reliability, and low cost compared to other joint processes. Recently, several mathematical models have been developed and studied for control and monitoring welding quality, productivity, microstructure and weld properties in arc welding processes. This study indicates the prediction of process parameters for the expected welding quality with accordance to the adaptive GTA welding process. Furthermore, the mathematical models is also develop to aid the selection of an optimal welding process as the generation of process controls to predict the bead geometry as a function output parameters in the GTA welding process. The developed models through this study showed comparatively excellent predicted results, and will extend to other welding processes to integrate an optimized system for the robotic welding process.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.5
• /
• pp.440-448
• /
• 2017

This paper proposes a controller design of a distributed source inverter in stand-alone mode or grid-connected mode to compensate the current or voltage harmonics caused by local nonlinear load. The PR-based multi loop controller has been used to improve the dynamic performance of the system and to compensate the output voltage or grid current harmonics. The multi-loop controller consists of an outer current controller and an inner voltage controller for the output voltage control in stand-alone mode. In grid-connected mode, an outer current controller is added to the output voltage controller for the grid current control. The design performance of each controller is described through the Root locus and Bode plot of the transfer functions. The validity of the proposed control algorithm and design parameters has been verified through the PSiM simulation and experimental results.

• Korean Journal of Environment and Ecology
• /
• v.20 no.1
• /
• pp.1-8
• /
• 2006

The objective of this study was to monitor the regenerated process of natural vegetation on the rear-slope of Jangheung multi-purpose dam using the recycling eco-revegetation technique. The monitoring plots were established in May 2004 and the plots were monitored in May 2004 and October 2005. Flora, plant community structures, naturally introduced plants, death rates were monitored. The change of flora after wood chip mulching decreased in family and species, but the influence of vine tree was extended. The urbanization index declined. Naturally introduced species and death ratios at the monitoring plot had a tendency to a higher increase in the deciduous broad-leaved forest.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.05a
• /
• pp.313-318
• /
• 2005

단 밴드 영상과는 달리 다차원 데이터는 분광적인 특성을 이용한 자동화된 영상 분석을 수행하는 장점이 있는 반면, 3차원 이상의 데이터를 분광차익 상에 시각화 하는데 어려움이 따른다. 클러스터링 기법을 이용한 영상 정보 추출은 자동화된 영상 분석적인 측면에서 중요한 분야 중 하나로서, 분광차원에서 구 형태의 조밀한 클러스터를 분리하는데 효과적인 방법으로 알려져 있지만 부정형(不定形)의 클러스터를 추출하는 방법에는 한계를 가진다. 따라서 본 연구는 모든 차원의 데이터를 2차원 상에 시각화하여 화소간 인접성을 개략적으로 확인할 수 있는 Star Coordinates 기법을 제안한다. 데이터의 다차원 시각화를 통해, 부정형 클러스터를 제거하여 다음 단계의 영상 분석 시 발생할 수 있는 오류를 방지할 수 있고, 명확한 클러스터를 확인 지정하여 클러스터링 정확도를 골일 수 있을 것으로 기대된다. 부가적인 연구고서, Star Coordinates 기법을 적용하여 Plot된 영상 데이터를 K-Means 알고리즘을 이용한 무감독 분류를 수행하여 그 결과를 확인하였다.

• IE interfaces
• /
• v.12 no.3
• /
• pp.458-467
• /
• 1999

In this paper, we analyze the calendaring operation in the process of paper manufacturing. Controllable parameters involved in the calendaring operation are the calendar material, temperature and pressure. Main objective of this paper is to find the robust design of these parameters which would provide consistent quality of paper in terms of the thickness, brightness, and roughness. We first use a split-plot design in the context of a central composit design for a preliminary analysis to find the proper calendar material. Next, response surfaces for the mean and variance of each quality attribute are fitted as functions of calender temperature and pressure. Bootstrap resampling approach is used to find the robust parameter design.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.1
• /
• pp.10-17
• /
• 1999

The present work presents condensation heat transfer and pressure drop data for the flow of R-12 in flat extruded aluminum tubes with small hydraulic diameters. The tube outside dimensions are $18mm(width){\times}1.7mm(height)$. Three types of internal geometry with the same outside dimensions are tested : sample 1 (7 tube holes), sample 2 (13 tube holes) and sample 3 (7 tube holes, micro-fin). The overall heat transfer coefficient is obtained for air-to-refrigerant heat transfer, and the Wilson plot method is used to determine the heat transfer coefficient for refrigerant flow. The sample 2 and sample 3 show significantly higher performance than sample 1. The heat transfer rates for the sample 2 and sample 3 are 9% and 12% higher, respectively, than sample 1. The friction factors for the sample 2 and sample 3 are 11.9% and 2.4% higher, respectively, than sample 1.