• 한국음향학회지
• /
• 제21권8호
• /
• pp.686-694
• /
• 2002

본 논문은 다중경로 해양환경에서의 수중 음향을 이용한 수중 설치 선배열 수신기의 위치 추정 알고리즘을 제안한다. 위치 추정을 위한 음원과 수신기 사이의 다중경로에 따른 도달시간은 M-계열 송신 신호 및 정합필터를 사용하여 계산하였으며, 음원과 수신기 사이의 수평거리는 음선 이론에 모델을 사용하여 계산하였다. 또한 모의 실험 및 해상 실험 자료 분석을 통해 제안된 알고리즘을 검증하였다.

• 대한기계학회논문집B
• /
• 제24권8호
• /
• pp.1077-1084
• /
• 2000

In this work, a modified stage-stacking method for the performance prediction of multi-stage axial flow compressors is proposed. The method is based on a simultaneous calculation of all interstage variables (temperature, pressure, flow velocity) instead of the conventional sequential stage-by-stage scheme. The method is also very useful in simulating the effect of changing angles of the inlet guide vane and stator vanes on the compressor operating characteristics. Generalized stage performance curves are used in presenting the performance characteristics of each stage. General assumptions enable determination of flow path data and stage design performance. Performance of various real compressors is predicted and comparison between prediction and field data validates the usefulness of the present method.

• 자원환경지질
• /
• 제32권2호
• /
• pp.169-175
• /
• 1999

The water leakage of reservoir embankment usually occurs through water vein, which gives little influence on the embankment in a normal state. However, the embankment can be destroyed when the water level of reservoir increases with heavy rain in summer. Investigating the water vein and its path is therefore very important from the viewpoint of disater prevention and embankment protection. This paper presents survey results of one-meter-depth ground temperature and multi-point temperature logging in an embankment in Japan to delineate water veins and permeable formations. Four water veins have been predicted in the embankment by comparing measured one-meter-depth ground temperatures with the background ones which have no effect of water vein. The multi-point temperature logging was carried out in the borehole drilled at one of the predicted water veins. Depth and thickness of the permeable formation in the borehole can be determined from temperature restoration ratios with elapsed time. From these results we can find that the water leakage of reservoir embankment mainly occurs in sandy soil formation in the embankment.

• 한국산학기술학회논문지
• /
• 제18권12호
• /
• pp.57-64
• /
• 2017

오늘날 EU환경규제로 포장용 완충재로 사용되는 EPS(스티로폼) 대체용 공기 충진 완충재는 출시 이후 점진적으로 시장이 확대되는 포장업계 블루칩이다. 공기충진형 완충재는 뛰어난 완충능력과 친환경성으로 EPS를 대체하여 빠르게 시장을 확장하고 있다. 기존 공기 충진 완충재에 대비하여 원료절감과 공정향상, 직관적 미관 향상을 모두 충족하는 새로운 선택 충진형 공기 충진재 제조기술이다. 본 연구는 다단 에어셀 충진 밸브성형기술은 선택충전 기술을 바탕으로, 밸브형성 구조기술을 적용하여 선택적으로 다양한 형태로 충진이 가능한 기술이다. 다단 에어셀 충진 밸브성형기술의 구조도는 밸브단이 구분된 제1주입필름, 밸브필름, 제2주입필름 등 3겹의 필름을 적층하여 복수의 주입구를 형성한 기술이다. 기존의 기술은 연결된 다수의 공기주머니에 공기를 주입하기 위한 별도의 외부 공기주입로가 필수적으로 구성되어야 하나, 본 연구는 공기 주머니의 내부에 외부 공기주입로가 형성되어 공기를 주입하기 위한 외부 공기주입로가 외견상 없어짐으로써 그에 따른 원재료 및 공정이 감소하고, 공기가 주입되어 원형 튜브로 팽창하는 과정에서 단면의 길이가 63~66%로 축소되는 공기주머니와 다르게 공기주입 후 내부 공기가 배출되고 단면이 원래의 길이를 유지하여 불필요하게 접힌 채 붙어 있는 외부 공기주입로를 내부에 일체화 하여 완충재의 미관이 향상되는 기술적 특징과 다수의 연속된 공기주머니에 선택적으로 공기를 충전할 수 있는 선택충전에 관한 것으로 기존 기술대비 뛰어난 차별성을 갖는 스마트한 공기충전형 완충재 제조 기술이다.

• 한국군사과학기술학회지
• /
• 제3권1호
• /
• pp.58-65
• /
• 2000

A target signal simulation method for passive sonar systems is introduced. The method uses multirate signal processing techniques to simulate moving target signals in the multi-path sound propagation environment by introducing Lloyd's mirror and Doppler effect. Time and frequency variation of target signal due to the target maneuvering is also considered to provide realistic ship signatures in the LOFAR gram so that the simulated target is used for sonar operator training. Synthesized target characteristics is analyzed and compared with real target signal in terms of interference pattern and frequency variation in the LOFAR gram.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.75.1-75.1
• /
• 2010

Dye sensitized solar cells(DSSCs) have been extensively studied due to their various advantages such as low production cost, colorful design, and eco-friendly process. Long optical path length is one of the most effective method to improve light harvest efficiency for DSSCs. Multi-layered $TiO_2$ nano-structured film with scattering layer has been studied to generate scattering effect by many researchers. It was expected that the difference of refractive index between $TiO_2$ particles and glass frit would generate the light scattering effect and provide the long optical path length. Therefore, to enhance the scattering effect, the frits of $Bi_2O_3-B_2O_3$-ZnO glass system that has the different refractive index were added to $TiO_2$ pastes in this study. First of all, the absorbance and haze factor of $TiO_2$ electrode with dyes and the refractive index of glass frit and $TiO_2$ were measured, respectively. To study the effect of frits, the efficiencies of DSSCs added glass frit and without glass frit were compared. Our results showed slightly higher efficiency with the different absorbance and haze factor of $TiO_2$ and glass frit. It was considered that the light scattering effect would be improved with adding frits to $TiO_2$ paste. Our preliminary studies will be useful for increasing efficiency of DSSCs.

• 한국심리학회지:학교
• /
• 제18권3호
• /
• pp.351-370
• /
• 2021

본 연구는 부모의 심리적 통제가 관계적 공격성에 미치는 영향과 그 과정에서 거부민감성과 우정관계 질투가 매개하는지 확인해보고자 하였다. 이를 확인하기 위해 대구·경북 소재 중학교에 재학 중인 청소년 556명(여학생 318명, 남학생 238명)을 대상으로 설문조사를 실시하였다. 분석결과를 살펴보면 첫째, 부모의 심리적 통제가 중학생 자녀의 관계적 공격성에 미치는 영향에서 거부민감성과 우정관계 질투가 순차적으로 매개하는 것으로 나타났다. 즉, 부모의 심리적 통제로 확립된 자녀의 거부민감성이 우정관계 질투를 증가시킴으로써 관계적 공격성에 영향을 미친다는 것을 알 수 있다. 둘째, 성별에 따른 경로 차이를 살펴보기 위해 다집단 분석을 실시한 결과, 부모의 심리적 통제에서 거부민감성으로 가는 경로, 부모의 심리적 통제에서 관계적 공격성으로 가는 경로, 우정관계 질투에서 관계적 공격성으로 가는 경로에서 성차가 나타났다. 본 연구는 부모의 심리적 통제가 중학생 자녀의 관계적 공격성에 영향을 미치는 과정에서 성별을 비교하여 차별화된 결과를 통해 관계적 공격성에 대한 이해를 확장시키고 치료적 개입방향을 모색하였다는 데 의의가 있다.

• 전기학회논문지
• /
• 제58권3호
• /
• pp.431-436
• /
• 2009

As the telecommunication lines bring into widespread use, one of the most important aspects related to power distribution systems is effectively to evaluate the effect on the telecommunication lines from power lines. One of the efficient methods to evaluate the effect is to measure the induced voltage of a telecommunication line as a result of a ground-loop. If the power lines cause high induced voltage, the ground reference in the telecommunication lines is no longer a stable potential, so signals may ride on the noise. A ground loop is common wiring conditions where a ground current may take more than one path to return to the grounding electrode at the arrangement between the power lines and telecommunication lines. When a multi-path connection between the power lines and telecommunication line circuits exists, the resulting arrangement is known as a ground loop. Whenever a ground loop exists, there are potential for damages or abnormal operations of the telecommunication lines. The power lines can induce the voltage on the communication line. The effects can be calculated by considering the inductances and capacitances. However, if we assume that there are only power lines, it doesn't have a practical meaning because there are conductors with other purpose in the neighborhood of the lines. If we consider that case, we need more complex system. Therefore we suggest more complex system considering the conductors with other purpose in the neighborhood of the lines. The neutral wires and the overhead ground wires are considered for calculating the induced voltage. We assume that there are the messenger wires beside the power line as a result of increased use of them. The main purpose of this paper is a study on a shielding effect of messenger wires in the distribution lines. EMTP(Electro-Magnetic Transients Program) program is used for the induced voltage calculation.

• 한국프랜차이즈경영연구
• /
• 제11권4호
• /
• pp.17-29
• /
• 2020

Purpose: As the untact culture has spread due to the recent COVID-19, the service industry as well as the beauty salon is shrinking. In order to overcome such a crisis in beauty salons, the lower dimension of beauty salon service quality is divided into servicescape, technical service, and employee service, and actions are taken with the 'perceived value of the customer' as a parameter. In this study, S-O-R(Stimulus-Organism-Response) theory was applied for customer-centered analysis, and gender and regularity were selected as moderator variables to add practical implications. Research design, data, and methodology: All constructs were measured using items developed and used in the previous study. A total of 261 questionnaires were collected online using NaverForm. The data were analyzed using factor analysis, correlation analysis, and measurement model analysis with SPSS 22.0 and AMOS 22.0. After testing the research model and hypothesis for the entire group, a multi-group analysis was conducted by dividing into male and female groups, regular customers, and non-regular customers. Results: First, this study showed that the service environment of beauty salon customers had a negative (-) effect on perceived utilitarian value, and the technical service and perceived hedonic value had a positive (+) effect on the customer's behavioral intention. Technical service and employee service had a positive (+) effect on perceived hedonic value, but perceived hedonic value did not affect customer's behavioral intention. Second, there is no statistically significant difference in each path between male and female groups. Third, there was a statistically significant difference between regular customers and non-regular customers, only the path that the servicescape influences the perceived hedonic value. Conclusion: According to the results of this study, technical service and utilitarian value should be considered in order to induce behavioral intention of customers, and technical service quality should be considered first. Also, operating a beauty salon requires a differentiated approach to the salon servicescape according to the ratio of non-regular and regular customers. The beauty salon servicescape generally showed negative practical value for non-regular customers, but positive for the Hedinic value for servicescape such as comfortable service and clean interior for regular customers.

• Nuclear Engineering and Technology
• /
• 제37권6호
• /
• pp.557-564
• /
• 2005

Air-water countercurrent flow limitation at perforated plates with four holes was investigated in a vertical tank to see the effects of the plate thickness, the number of hole, and the diameter of the hole on the onset of CCFL. The thickness of plates was 1 cm and 4 cm, with a relatively large hole diameter of 5 cm. The collapsed water level formed on the perforated plate and its distribution in the upper plenum were measured. The gas flow rate in the multi-hole plate is relatively higher than one in the single tube because some of holes in the multi-hole plate provide a flow path fur liquid with less air-liquid resistance than in the single tube. The onset of CCFL occurred at nearly the same air flow rate regardless of the plate thickness. The negligible effect of the plate thickness on CCFL means that the flooding is initiated at the top of the plate rather than at its bottom. It turns out that $j_k$ and $K_k$ better fit the data than $H_k$ when hole diameter is greater than 2.86 cm. In our experimental ranges, the collapsed water levels at the onset of CCFL ranged from 7.5 cm to 10.5 cm. There was no three dimensional distribution of water level before and after the onset of CCFL.