• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.8
• /
• pp.741-746
• /
• 2007

In this study, transfer path identification and output estimation are simulated by multi-dimension spectral analysis method (MDSA). Multi -input/single-output system give expression the vehicle suspension which each inputs are correlated reciprocally. In case of correlating with inputs, the system needs separating the each input signal by MDSA. Main simulations are about finding effective input by coherent output spectrum and selecting optimal input's number by multiple coherence function. Also, by shielding transfer path of each input, transfer path characteristic is identified in terms of overall integrated contribution level.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1041-1044
• /
• 1999

In This paper, we investigated the single step prediction for output responses of chaotic system with multi Input multi output using chaotic neural networks. Since the systems with chaotic characteristics are coupled between internal parameters, the chaotic neural networks is very suitable for output response prediction of chaotic system. To evaluate the performance of the proposed neural network predictor, we adopt for Lorenz attractor with chaotic responses and compare the results with recurrent neural networks. The results demonstrated superior performance on convergence and computation time than the predictor using recurrent neural networks. And we could also see good predictive capability of chaotic neural network predictor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1286-1292
• /
• 2015

In this paper, a multi-input multi-output (MIMO) full-duplex system is addressed, where both the transmitter and receiver have multiple antennas. Fundamental problems of the MIMO full-duplex technique are discussed, and possible solutions are presented. In particular, the transceiver designs that have been reported in the literature are technically reviewed, and their problems are discussed investigating the feasibility of the full-duplex technique in commercialized systems such as LTE and WiFi.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.4
• /
• pp.673-682
• /
• 2010

This paper describes and analyzes a various generation methods of the mutually orthogonal polyphase sequences with low cross-correlation peak sidelobe and low autocorrelation peak sidelobe levels. The mutual orthogonality is the key requirement of multi-static or MIMO(Multi-Input Multi-Output) radar systems which provides the good target detection and tracking performance. The polyphase sequences, which are generated by SA(Simulated Annealing) and GA(Genetic Algorithm), have been analyzed with ACF(Autocorrelation Function) PSL(Peak Sidelobe Level) and CCF(Crosscorrelation Function) level at the matched filter output. Also, the ambiguity function has been introduced and simulated for comparing Doppler properties of each sequence. We have suggested the phase selection rule for applying multi-static or MIMO systems.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.9
• /
• pp.857-862
• /
• 2011

This paper studies the output consensus problem for a class of heterogeneous linear multi-agent systems under a fixed directed communication network. The dynamics, as well as its dimension, of each agent can widely differ from the others, but all the agents are assumed to have the same transfer matrix. In addition, only the system outputs are constrained to be delivered through the network. Under these conditions, we show that the output consensus is reached by a group of identical controllers, which is designed to achieve the state consensus for the homogeneous multi-agent system obtained from the minimal realization of the transfer matrix. Finally, an example is given to demonstrate the proposed result.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.115-118
• /
• 2001

In this paper we propose an FDI(fault detection and isolation) algorithm using neural network-based multi-fault models to detect and isolate single faults in nonlinear systems. When a change in the system occurs, the errors between the system output and the neural network nominal system output cross a threshold, and once a fault in the system is detected, the fault classifier statistically isolates the fault by using the error between each neural network-based fault model output and the system output.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.4
• /
• pp.59-65
• /
• 1997

This paper proposes a new approach for the design of a multi-output electronic ballast for fluorescent lamps of different outputs and control method. At first, a standard-output electronic ballast is constructed and then fluorescent lamps with different outputs are lighted by the frequency control of inverter circuit using MeV. This multi-output electronic ballast consists of a rectifier circuit, an inverter circuit, and a frequency control circuit to determine the optimal frequency for the lamps of different output. In order to verify the proposed design method, a prototype of a multi-output electronic ballast for 11 [WJ. 15[WJ compact fluorescent lamps and 20W fluorescent lamp is constructed. Results of observing the voltage and current characteristics of lamps are in accord with those of PSpice simulation. Also its efficacy is nearly the same as the other electronic ballasts. From the result, therefore, validity of the proposed design method of a multi-output electronic ballast for fluorescent lamps is verified.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.6
• /
• pp.699-706
• /
• 2015

A previous adapter have a single-ouput, however, a demand of a multi-output adapter increase in the recent industrial site. In order to satisfy the demand, in this research, we implement a programmable high efficiency multi-output adapter. The basic structure of the adapter introduced in this paper is a sort of flyback. The way for producing the reference voltage of the adapter proposed is similar to the way in the general flyback implemented with TL431. In addition to the basic concept of the design, however, we introduce a digital variable resistor, AD5246BKSZ10-RL7 and a microcontroller for changing a programmable multi-output. It makes output be variable that the digital variable resistor change the reference voltage of the adapter by order of the microcontroller. The adapter output voltage is controllable in the range of 20V by the user, and the power efficiency is proven to be 85%.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.397-401
• /
• 1994

This paper proposes an identification method for a thin plate where multiple actuators and sensors are bonded. Since a thin plate has small damping ratios of all modes, each mode can be identified seperately with a bandpass filter for each modal signal. With the bandpass filter and the characteristics of the plate, the Multi-Input Multi-Output (MIMO) model of the plate can be converted to several Multi-Input Single-Output(MISO) models of second order linear difference equations of the modes. Parameters for each mode are obtained by using the Least Square method. Form there MISO models, the MIMO model is obtained in the form of the state space. Experiments were performed for an all-clamped plate with two pairs of piezoelectric actuators and sensors. The outputs of the identified model and the experimental data match well.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.11a
• /
• pp.75-76
• /
• 2012

본 논문에서는 MIMO(multi-input multi-output) RQD(rotation constellation and Q-delay) 시스템을 적용하여 지상파 UHDTV 시스템을 구현하기 위한 전송 시스템의 성능을 분석한다. 차세대 UHDTV 시스템이 필요로 하는 높은 전송량을 달성하기 위하여 STBC(space time block code)를 사용하는 기존의 MISO(multi-input single-output)와 MIMO(multi-input multi-output) 시스템에 RQD 기술을 더하여 성능을 개선한다. 개선된 MISO RQD 기법과 MIMO RQD 기법의 성능을 컴퓨터 시뮬레이션을 통하여 비교 분석하였다. 또한 실험 결과를 통하여 앞으로 차세대 지상파 UHDTV를 위한 방향을 제시한다.