• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.372-372
• /
• 2013

기존의 MOSFET 구조의 소자는 비례 축소에 의한 단 채널효과, 누설전류, 신뢰성 문제 같은 어려움에 직면해 있다. 이로 인해 20 nm 이하 소자 크기에서 기존의 MOSFET을 대체할 여러가지 차세대 소자에 대한 연구가 활발히 진행 되고 있다. 그 중에서 FinFET 소자는 비례 축소에 용이하고 누설전류 문제에 대한 장점으로 인해 활발한 연구가 진행되고 있다. 기존의 FinFET 소자에 대한 연구는 FinFET 구조를 이용한 메모리 소자의 전기적 특성의 향상, fin의 크기에 따른 소자의 특성 변화와 FinFET 구조의 물질 변화에 따른 전기적 특성 변화에 대한 연구가 많이 이루어져 왔다. 실제 공정에서의 fin의 형태 변화에 따른 전기적 특성변화에 대한 연구가 필요하다. 본 연구에서는 fin의 모서리의 모양의 변화에 따른 FinFET 소자의 전기적 특성 변화를 관찰하였고 전하 수송 메커니즘을 규명하였다. 실제 FinFET 소자의 공정에서 fin의 형태는 이상적인 직육면체 모양이 아니라 옆면이 기울고 모서리가 곡선이 되게 된다. 이로 인한 전자의 이동도 변화로 인해 소자의 성능이 변화하게 된다. FinFET의 경우 채널을 구성하는 fin의 각 면의 Si의 orientation이 다르다. 또한 fin의 모서리의 모양이 변화 함에 따라 채널영역의 orientation이 변화 하게 된다. 이에 따라 fin의 모서리 모양의 변화에 따른 소자의 전기적 특성 변화를 multi-orientation mobility model을 포함한 three-dimensional TCAD 시뮬레이션을 통해 계산하였다. 옆면과 윗면이 만나는 모서리의 모양의 곡률의 크기를 증가하여 다양한 fin의 형태에서 전기적 특성을 관찰하였다. Fin의 옆면과 윗면이 만나는 모서리의 곡률이 증가함에 따라 depletion 영역의 크기 변화와 채널에서의 전자의 밀도와 이동도의 변화를 관찰하였고 이를 토대로 fin의 형태 변화가 FinFET 소자의 전기적 특성에 미치는 영향을 조사하였다.

• International Journal of Advanced Culture Technology
• /
• v.6 no.3
• /
• pp.142-150
• /
• 2018

This paper describes the algorithm that lowers the dimension, maintains the object recognition and significantly reduces the eigenspace configuration time by combining the edge orientation histogram and principle component analysis. By using the detected object region as a recognition input image, in this paper the object recognition method combined with principle component analysis and the multi-layer network which is one of the intelligent classification was suggested and its performance was evaluated. As a pre-processing algorithm of input object image, this method computes the eigenspace through principle component analysis and expresses the training images with it as a fundamental vector. Each image takes the set of weights for the fundamental vector as a feature vector and it reduces the dimension of image at the same time, and then the object recognition is performed by inputting the multi-layer neural network.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2266-2273
• /
• 2000

Equations of motion of a multi-beam system undergoing overall rigid body motion are derived by employing finite element method. An orientation angle is employed to allow the arbitrary orientation o f the beam element. Modal coordinate reduction technique, which has been successfully utilized in the conventional linear modeling method, is employed for the present modeling method to reduce the computational effort. Different from the conventional linear modeling method, the present modeling method captures the motion-induced stiffness variations which are important for the dynamic analysis of structures undergoing overall rigid body motion. The numerical results are compared to those of a commercial program to verify the reliability of the present method.

• Fisheries and Aquatic Sciences
• /
• v.27 no.4
• /
• pp.225-230
• /
• 2024

We examined the dB difference in target strength at multiple frequencies (ΔTS) for the identification of Antarctic krill (Euphausia superba) and ice krill (Euphausia crystallorophias) using a stochastic distorted-wave Born approximation model. Our investigation focused on ΔTS patterns at multiple frequencies in relation to size, along with key acoustic properties influencing TS, including density and sound speed contrast, fatness, and orientation. The findings revealed that the orientation and fatness significantly affect the ΔTS patterns. The results provide insight into the importance of the multi-frequency technique for estimating krill biomass and their ecological interactions with environmental features in the Southern Ocean.

• Korean Journal of Human Ecology
• /
• v.22 no.2
• /
• pp.329-342
• /
• 2013

As mobile phone has acquired a status of a fashion item expressing one's character, it is necessary to understand the fashion needs for this new fashion product. The purpose of this study was to apply the fashion orientation construct developed in the clothing research field to mobile phone and explore its validity. The multi-dimensional construct of fashion orientation which most widely represented the fashion aspects was examined for the two product categories of clothing and mobile phone. Data were collected from an online questionnaire survey, and a total of 1,136 responses were analyzed. The construct structure of fashion orientation of mobile phone resulted in individuality, innovation, and fashion was different from that of clothing extracted to interest/importance, fashion/innovation, and individuality. Fashion sensitivity and an early adoption of a new product were two different dimensions in mobile phone while not separable in clothing. Despite a higher predictability of the fashion/innovation orientation of clothing on fashion orientation rather than on innovation orientation of mobile phone, innovation orientation was more important to purchase behaviors of mobile phone. The study still implies that it is valid to use clothing fashion innovative consumers for mobile phone marketing.

• The Journal of the Korea Contents Association
• /
• v.17 no.12
• /
• pp.600-616
• /
• 2017

This study examined the mediating effects of strengths use on the relation of strengths knowledge and career decision level among 393 college students. To analyze the data, the structural equation modeling were used. Finally, the mediating model examined the differences between goal orientation(validation-seeking orientation, growth-seeking orientation) of Dykman by carrying out of multi-group analysis. The results were as followed. First, strengths use partially mediated the relationship between strengths knowledge and career decision level. Second, the mediating model showed variation in different goal orientation type group. In other words, strengths knowledge occurs more severely and distinctively impact on career decision level in growth-seeking group than validation-seeking group. Based on the findings, implications for counseling practice, limitations of this study and recommendations for future study were discussed.

• Journal of the Optical Society of Korea
• /
• v.15 no.1
• /
• pp.15-21
• /
• 2011

This paper proposes a new approach to palmprint verification based on the gradient, in which a palm image is considered to be a three-dimensional terrain. Principal lines and wrinkles make deep and shallow valleys on a palm landscape. Then the steepest slope direction in each local area is first computed using the Kirsch operator, after which an orientation map is created that represents the dominant slope direction of each pixel. In this study, three orientation maps were made with different scales to represent local and global gradient information. Next, feature matching based on pixel-unit comparison was performed. The experimental results showed that the proposed method is superior to several state-of-the-art methods. In addition, the verification could be greatly improved by fusing orientation maps with different scales.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.1
• /
• pp.88-104
• /
• 1999

This study was carried out to classify the Hanjis into three groups that were indigenous Hanji, traditional Hanji, and improved Hanji handmade by paper making method according to the physical properties of each paper sheet such as tensile, bursting and tearing strength, folding endurance and fiber orientation in each layer. The results obtained were summarized as follows: 1. The multi-layered Hanjis made by "Oebal" Hanji making method in different direction of fiber orientation have good properties in tearing resistance. 2. The multi-layered Hanji in different direction of fiber orientation has good properties in the tearing resistance, but the burst index and the breaking length results were lower than the single layered Hanjis. 3. The different fiber orientation and multi-layered method didn't increase, the three indexes(burst index, tear index, breaking length). Only, the different direction of fiber orientation decreased the difference of width and length strength (tensile, tear) of the Hanji. 4. "Dochim"(Korean finishing touch process for indigenous Hanji by fulling round sticks) greatly increase folding endurance(double folds, not $log_{10}$) and good effect to tensile strength and burst strength. 5. The today's Oebal Hanji were the maximum of 2 layers and the indigenous Oebal Hanji were 16 layers the maximum. In addition, average of the indigenous Oebal Hanji was 4 layers(all 4-layer Hanji were the different fiber orientation of each layer). 6, The indigenous Hanji(multi-layered, and different fiber orientation) was good condition with "Dochim". Dochim increased tensile strength and burst strength of the indigenous Hanji. So the three-strength indexes were similar level("--"). 7. When the number of layer which were same fiber orientation increase, the increased Hanji became similar strength pattern("V", breaking length and burst index was higher than tear index) with "Ssangbal" Hanji. 8. The single layered papers that made by "Oebal" Hanji making method were similar strength pattern with Ssangbal Hanji. 9. There was no way to find the width and length direction of multi-layered Hanji by comparison between the difference of tensile strength and the difference of tearing resistance. 10. The compared pattern of tensile strength and tearing resistance of indigenous Oebal Hanji was different from today's Oebal Hanji. Especially, the tearing resistance of all indigenous Oebal Hanji(16 samples) was stronger on width of tearing resistance. And in the half of indigenous Oebal Hanji samples, the width of tensile strength and tearing resistance was stronger than length strength (Indigenous Oebal: '$\ulcorner\lrcorner$' 50%, '$\bigcup$' 50% $\leftrightarrow$ Today's Oebal: '$\ulcorner\lrcorner$' 12%, '$\bigcup$'6%, '$\llcorner\urcorner$'17%, '$\bigcap$'65%). In 65% today's Oebal, the length direction of tensile strength and tearing resistance was stronger than the width direction.

• The International Journal of Costume Culture
• /
• v.9 no.1
• /
• pp.15-26
• /
• 2006

The purposes of this study were 1) to identify the dimension of perceived service quality of fashion retail stores in the basis of expanded marketing mix, 2) to investigate the effect of each dimension on long-term orientation/customer satisfaction, trust, commitment and WOM/repurchase intention) on perceived service quality. The questionnaires were administered to 333 women shopped in a fashion retail store in Gwang-ju city. Data were analyzed by using exploratory and confirmatory factor analysis, Cronbach' ${\alpha}$, and multi-regression analysis. The results were as follows: 1) The dimension of perceived service quality based on expanded marketing mix were classified as follow: product, price, place, promotion, people, physical evidence, process services. Long-term orientation was categorized into four factors: customer satisfaction, trust, commitment, WOM/repurchase intention. 2) For the effect of the perceived service quality by dimension, product, people, physical evidence, process services have significant effect on long-term orientation, while price, place, promotion services have not significant.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.3
• /
• pp.191-204
• /
• 2014

In recent years, multi-camera systems have been recognized as an affordable alternative for the collection of 3D spatial data from physical surfaces. The collected data can be applied for different mapping(e.g., mobile mapping and mapping inaccessible locations)or metrology applications (e.g., industrial, biomedical, and architectural). In order to fully exploit the potential accuracy of these systems and ensure successful manipulation of the involved cameras, a careful system calibration should be performed prior to the data collection procedure. The calibration of a multi-camera system is accomplished when the individual cameras are calibrated and the geometric relationships among the different system components are defined. In this paper, a new single-step approach is introduced for the calibration of a multi-camera system (i.e., individual camera calibration and estimation of the lever-arm and boresight angles among the system components). In this approach, one of the cameras is set as the reference camera and the system mounting parameters are defined relative to that reference camera. The proposed approach is easy to implement and computationally efficient. The major advantage of this method, when compared to available multi-camera system calibration approaches, is the flexibility of being applied for either directly or indirectly geo-referenced multi-camera systems. The feasibility of the proposed approach is verified through experimental results using real data collected by a newly-developed indirectly geo-referenced multi-camera system.